Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
IPv4-only mode saves 20KB+ of flash memory.
Add some backwards compatibility with the global Arduino Ethernet
class when running in IPv4 only mode.
Fixes#687
* Speed P.IO build by not cloning 2GB of sources
* Document P.IO new option
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
* Update board generation, use renamed function
* Update documentation with new platform integration state
* Remove accidentally pushed file
* Use correct update command
* Use correct highlighting
* Use correct language
* Add section on debugging
* Add docs on filesystem, minor corrections
* Use -iprefix in compilation, but still expose all include paths to IDE
* Add exception and RTTI support, document them
* Fix typo
Fixes a crash of the builder script, `board.get("build.variant", None)` will throw an exception if the `build.variant` was not found (and not return `None` as the fallback value), but an empty string works, so check against that.
USB power defines moved directly into the board files, but still ensure that the macro always exists (with a default fallback value) to not fail the build.
Defines USBD_MAX_POWER_MA as a static 250mA, which is correct for all the boards supported in platform-raspberrypi (aka, RaspberryPi Pico and Nano RP2040 Connect)
* Add package.json
To make package easily integratable with PlatformIO
* Correct name back to original one
* Format package.json
* Add first shot at builder script
* Add USB stack flags, fix compile flags
* Formatting
* Add more link & USB flags
* Build Boot2 bootloader
* Formatting
* Generate linkerscript, linker fixes
* Fix linkflags, make firmware runnable
* Update USB flags and RAM size
* Correct USB flags, add dynamic sketch partitioning
* Restructure filesystem size and flash size logic into platform code
* Move C++ only flags to CXXFLAGS
* Add PlatformIO documentation
* Link to new platform.io document in the docs TOC
* Fix typos in platformio docs
* Fix one additional typo in platformio.rst
* Update docs
* Remove wrongly commited build folder
