Fixes#2914
There are 2 systick units, one per core. Set up and start core1's
systick unit and track each core's epoch separately.
Document a method of preserving 100% user-only code on core1
and add a core1_disable_systick boolean flag that works like the
separate stack one.
* Add PIO-based SoftwareSPI enabling SPI on any pins
The Raspberry Pi team has a working PIO-based SPI interface. Wrap it
to work like a hardware SPI interface, allowing SPI on any pin
combination.
Tested reading and writing an SD card using unmodified SD library.
* Add W5500 example
Good for testing, shows non-contiguous pin outs.
* Added buffer read to `AudioBufferManager` and `I2S`. Example and documentation included.
* Update type of words to unsigned in example.
* Improve buffered loopback example.
* Remove const from read buffer.
* Replace ESP8266SdFat w/SdFat 2.3.0, add SDIO and ExFAT support
Remove ESP8266SdFat fork and replaces with upstream SdFat to simplify
maintenance.
This 2.3.0 version adds SDIO support and enables exFAT support.
Also upgraded FAT filename support to 256 chars, identical to LittleFS.
* Add SDIO support to SD and SDFS, documentation, and examples
* Update SD examples to all support SPI0, SPI1, or SDIO
Semihosting is handy for debugging, so allow the core to use `SerialSemi` as the
::printf port. Add menu item to the IDE to allow selection.
Add RISC-V implementation of semihost call
Adds a menu item to enable onboard profiling. This requires significant
RAM and really only makes sense on devices with PSRAM to store the state.
When the menu item is selected, allocates RAM and tracks function calls and
periodically samples the PC to generate a histogram of application usage.
The onboard gmon.out file can be written over Semihosting or
some other way to transfer to a PC for analysis.
Adds a profiling example with command lines.
Enable ARM-only semihosting mode. This mode allows applications on the
Pico to write to the OpenOCD console and read and write files on the
host system (i.e. debugging dump information, etc.)
It is not very fast because of the way it uses breakpoints on the Pico
to communicate, but it is useful in cases when you want to get a single
file off of the Pico while debugging.
Note that this **requires** a connected OpenOCD and GDB or else the
semihosting will cause a system panic.
The RP2350 boot ROM seems to randomize memory on a HW reset, including
both CPU stacks where we normally stuff the "reset to bootloader" flag.
Update the docs and source to remove rp2040.enableDoubleResetBootloader()
on RP2350-based boards.
Fixes#2606
* Enable LWIP IGMP, MDNS internal server
* Enable MDNS lookup from LWIP DNS
* Add SimpleMDNS responder, small code and no malloc
* Ensure we copy out lwipopts in make-libpico
Adds a small wrapper around the LWIP-provided MDNS responder application.
Drop-in replacement in many basic cases for LEAmDNS.
For FreeRTOS it is important to not allocate memory on an LWIP callback.
LEAmDNS needs to do this to create response objects, leading to crashes.
Increase LWIP timers by bumping the LWIP_ARP number (as done before).
Replace ArduinoOTA LEAmDNS with SimpleMDNS and update a
HTTPUpdateServer example.
* Adds RISC-V compilation option to the IDE and Platform.IO.
* Build RP2350-RISCV libpico, libbearssl
* Fix RP2350 BearSSL library (was copied from RP2040, now built for M33)
* New GCC 14.2 toolchain is required (12.4 RISC-V support is borked)
* Newlib locking fixed prototypes
* Manually force all runtime init code into RP2350 binaries
* Add RISC-V to CI
* Remove RP2350 BOOT2.S files, binaries (not used)
* Clean up minor GCC 14.x warnings
* Add RP2350-RISCV OTA build, link
* Add RISC-V FreeRTOS files (configuration still not running, but builds)
* Add basic documentation
The RP2350 has a different blob header requirement to identify a working
image. Ensure that header is present in the OTA loader.
Update the PicoOTA examples for the 2350
* Add support for the extra 16 GPIO pins in the menus and core.
* Clean up Generic RP2350 PSRAM ("none" is valid) and flash (other than 16MB) options.
* Add extra GPIO<->peripheral connections
* Add Pimoroni PGA2350 RP2350B-based board
* Pins 32-47 can be used for PIOPrograms
* Avoid hang when PSRAM fails to initialize
* Move libpico to an RP2350B board for SDK (otherwise the SDK drops all GPIOHI support)
Use real GPIO pad inversion to allow inverted RX, TX, and controls for
the hardware UART and software PIO-emulated serial ports.
Adds ``setInvertTX(bool)`` and ``setInvertRX(bool)`` calls to both ports,
with ``setInvertControl(bool)`` for the HW UARTS.
