Instead of listing each board three times (normal upload, picoprobe,
and pico-debug uploads), list each board once and use a menu to select
the actual upload method.
Also add in picotool as an upload method for those folks who have trouble
with automounting.
Fix#1111
Mimics the I2S/PWMAudio/Stream interface for ease of use.
* Fix non-32b DMA size transfer calculation in ABM
* Rename wasHolding to isHolding in the I2S/PWM
It is the **current** number of bits left, not the past number.
* Add commented microphone example
* Add docs
SingleFileDisk allows for exporting a file from the onboard LittleFS
filesystem to a PC through an emulated FAT drive when connected. The
PC can open and copy the file, as well as delete it, but the PC has no
access to the main onboard LittleFS and no actual on-flash FAT
structures are used.
This is handy for things like data loggers. They can run connected to
USB power for some time, and then connected to a PC to dowmload the CSV
log recorded.
It's almost 2023, allow LFN (long file names) on the emulated USB disk.
Reduce the disk buffer size to 64 bytes. The buffer is statically
allocated so it's always present, even in non-USB disk mode, meaning
all apps will pay the RAM price for it. 64 bytes is slower to read
but works and saves ~1/2KB of heap for all apps.
Allow the IDE to detect UF2 volumes (i.e. when you hold BOOTDEL and
plug in the board).
Allows the IDE2 to properly upload using OTA and serial.
Fixes#890 and others
Call `rp2040.enableDoubleResetBootloader()` anywhere in the code to
enable the check. W/o that call, the checker will be linked in.
See #892
CORE1 doesn't start until well after the C runtime initialization,
so the flag won't be overwritten.
Also increase timeout to 350ms because OTA bootup can be
slow.
* Add HTTP-parser lib to support ESP32 WebServer
* Add WebServer from ESP32. Only supports HTTP
* Separate HTTP server from the network server
Instead of managing the WiFiServer/WiFiServerSecure in the same object
as the HTTP handling, split them into separate objects. This lets
HTTP and HTTPS servers work without templates or duplicating code.
The HTTP block just gets a `WiFiClient*` and works with that to only
do HTTP processing, while the upper object handles the appropriate
server and client types.
* Add HTTPS server
* Clean up some THandlerFunction refs
* Refactor into a template-ized WebServer/WebServerSecure
* Add DNSServer examples which need WebServer
* Fix CoreMutex infinite recursion crash
Core could crash while Serial debugging was going on and prints were
happening from LWIP/IRQ land and the main app.
* Add HTTPUpdateServer(Secure)
* Add MIME include, optimize WebServer::send(size,len)
When send()ing a large buffer, the WebServer::send() call would
actually convert that buffer into a String (i.e. duplicate it, and
potential issues with embedded \0s in binary data).
Make a simple override to send(size, len) to allow writing from the
source buffer instead.
* Fix WiFiClient::send(Stream), add FSBrowser example
Remove the need to have a separate WiFiClient that's destroyed after
the HTTPClient. Let the object handle its own client, and pass through
any SSL requests.
Also supports the original ::begin methods which need a
WiFiClient(Secure) to be passed in and managed by the app.
Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
Simple sketches should work without modification, but some modes (listed
in the docs) are not possible to support on the Pico W with BearSSL.
Fixes#691
IPv4-only mode saves 20KB+ of flash memory.
Add some backwards compatibility with the global Arduino Ethernet
class when running in IPv4 only mode.
Fixes#687
* Speed P.IO build by not cloning 2GB of sources
* Document P.IO new option
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
