.github/workflows/pull-request.yml

@@ -10,7 +10,7 @@ jobs:
 
 # Consistent style, spelling
   astyle:
-    name: Spelling, Style, Boards, Package, PIO
+    name: Spelling, Style, Boards, Package
     runs-on: ubuntu-latest
     steps:
     - uses: actions/checkout@v4
@@ -19,8 +19,13 @@ jobs:
     - name: Run codespell
       uses: codespell-project/actions-codespell@v2
       with:
-        skip: ./ArduinoCore-API,./libraries/ESP8266SdFat,./libraries/Adafruit_TinyUSB_Arduino,./libraries/LittleFS/lib,./tools/pyserial,./pico-sdk,./.github,./docs/i2s.rst,./cores/rp2040/api,./libraries/FreeRTOS,./tools/libbearssl/bearssl,./include,./libraries/WiFi/examples/BearSSL_Server,./ota/uzlib,./libraries/http-parser/lib,./libraries/WebServer/examples/HelloServerBearSSL/HelloServerBearSSL.ino,./libraries/HTTPUpdateServer/examples/SecureBearSSLUpdater/SecureBearSSLUpdater.ino,./.git,./libraries/FatFS/lib/fatfs,./libraries/FatFS/src/diskio.h,./libraries/FatFS/src/ff.cpp,./libraries/FatFS/src/ffconf.h,./libraries/FatFS/src/ffsystem.cpp,./libraries/FatFS/src/ff.h,./libraries/lwIP_WINC1500/src/driver,./libraries/lwIP_WINC1500/src/common,./libraries/lwIP_WINC1500/src/bus_wrapper,./libraries/lwIP_WINC1500/src/spi_flash,./libraries/WiFi/examples/BearSSL_Validation/certs.h
+        skip: ./ArduinoCore-API,./libraries/ESP8266SdFat,./libraries/Adafruit_TinyUSB_Arduino,./libraries/LittleFS/lib,./tools/pyserial,./pico-sdk,./.github,./docs/i2s.rst,./cores/rp2040/api,./libraries/FreeRTOS,./tools/libbearssl/bearssl,./include,./libraries/WiFi/examples/BearSSL_Server,./ota/uzlib,./libraries/http-parser/lib,./libraries/WebServer/examples/HelloServerBearSSL/HelloServerBearSSL.ino,./libraries/HTTPUpdateServer/examples/SecureBearSSLUpdater/SecureBearSSLUpdater.ino,./.git,./libraries/FatFS/lib/fatfs,./libraries/FatFS/src/diskio.h,./libraries/FatFS/src/ff.cpp,./libraries/FatFS/src/ffconf.h,./libraries/FatFS/src/ffsystem.cpp,./libraries/FatFS/src/ff.h,./libraries/lwIP_WINC1500/src/driver,./libraries/lwIP_WINC1500/src/common,./libraries/lwIP_WINC1500/src/bus_wrapper,./libraries/lwIP_WINC1500/src/spi_flash
         ignore_words_list: ser,dout,shiftIn,acount,froms
+    - name: Get submodules for following tests
+      run: git submodule update --init
+    - name: Check package references
+      run: |
+        ./tests/ci/pkgrefs_test.sh
     - name: Check boards.txt was not edited after makeboards.py
       run: |
         ./tools/makeboards.py
@@ -33,15 +38,6 @@ jobs:
         ./tests/restyle.sh
         # If anything changed, GIT should return an error and fail the test
         git diff --exit-code
-    - name: Check compiled PIO files
-      run: |
-        (cd ./tools && ./get.py)
-        ./tools/makepio.py
-        # If anything changed, GIT should return an error and fail the test
-        git diff -w --exit-code
-    - name: Check package references
-      run: |
-        ./tests/ci/pkgrefs_test.sh
 
 # Build all examples on linux (core and Arduino IDE)
   build-linux:
@@ -268,8 +264,8 @@ jobs:
       run: |
         python -m pip install --upgrade pip
         pip install --upgrade platformio
-        rm -rf ~/.platformio/platforms/raspberrypi*
         pio pkg install --global --platform https://github.com/maxgerhardt/platform-raspberrypi.git
+        pio pkg update --global --platform https://github.com/maxgerhardt/platform-raspberrypi.git
         pio pkg install --global --tool symlink://.
         cp -f /home/runner/work/arduino-pico/arduino-pico/tools/json/*.json /home/runner/.platformio/platforms/raspberrypi/boards/.
     - name: Build Multicore Example
@@ -325,8 +321,8 @@ jobs:
       run: |
         python -m pip install --upgrade pip
         pip install --upgrade platformio
-        rm -rf ~/.platformio/platforms/raspberrypi*
         pio pkg install --global --platform https://github.com/maxgerhardt/platform-raspberrypi.git
+        pio pkg update --global --platform https://github.com/maxgerhardt/platform-raspberrypi.git
         pio pkg install --global --tool symlink://.
         cp -f /home/runner/work/arduino-pico/arduino-pico/tools/json/*.json /home/runner/.platformio/platforms/raspberrypi/boards/.
     - name: Build Every Variant

.gitignore

@@ -5,8 +5,5 @@ docs/_build
 ota/build
 ota/build-rp2350
 ota/build-rp2350-riscv
-tools/libpico/boot
-tools/libpico/build-rp2040
-tools/libpico/build-rp2350
-tools/libpico/build-rp2350-riscv
+tools/libpico/build
 platform.local.txt

README.md

@@ -69,21 +69,16 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * Melopero Cookie RP2040
 * Melopero Shake RP2040
 * METE HOCA Akana R1
-* Makerbase MKSTHR36
-* Makerbase MKSTHR42
 * MyMakers RP2040
 * Neko Systems BL2040 Mini
 * Newsan Archi
 * nullbits Bit-C PRO
-* Olimex Pico2XL
-* Olimex Pico2XXL
 * Olimex RP2040-Pico30
 * Pimoroni PGA2040
 * Pimoroni Pico Plus 2
 * Pimoroni Pico Plus 2W
 * Pimoroni Plasma2040
 * Pimoroni Plasma2350
-* Pimoroni Servo2040
 * Pimoroni Tiny2040
 * Pimoroni Tiny2350
 * Pintronix PinMax
@@ -98,13 +93,11 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * Solder Party RP2040 Stamp
 * Solder Party RP2350 Stamp
 * Solder Party RP2350 Stamp XL
-* SparkFun IoT RedBoard RP2350
 * SparkFun MicroMod RP2040
 * SparkFun ProMicro RP2040
 * SparkFun ProMicro RP2350
 * SparkFun Thing Plus RP2040
 * SparkFun Thing Plus RP2350
-* SparkFun XRP Controller
 * uPesy RP2040 DevKit
 * VCC-GND YD-RP2040
 * Viyalab Mizu RP2040

cores/rp2040/Arduino.h

@@ -27,23 +27,10 @@
 #include "RP2040Version.h"
 #include "api/ArduinoAPI.h"
 #include "api/itoa.h" // ARM toolchain doesn't provide itoa etc, provide them
-#include <pico.h>
-#undef PICO_RP2350A // Set in the RP2350 SDK boards file, overridden in the variant pins_arduino.h
 #include <pins_arduino.h>
 #include <hardware/gpio.h> // Required for the port*Register macros
 #include "debug_internal.h"
 
-// Chip sanity checking.  SDK uses interesting way of separating 2350A from 2350B, see https://github.com/raspberrypi/pico-sdk/issues/2364
-#if (!defined(PICO_RP2040) && !defined(PICO_RP2350)) || defined(PICO_RP2040) && defined(PICO_RP2350)
-#error Invalid core definition. Either PICO_RP2040 or PICO_RP2350 must be defined.
-#endif
-#if defined(PICO_RP2350) && !defined(PICO_RP2350A)
-#error Invalid RP2350 definition.  Need to set PICO_RP2350A=0/1 for A/B variant
-#endif
-#if defined(PICO_RP2350B)
-#error Do not define PICO_RP2350B.  Use PICO_RP2350A=0 to indicate RP2350B.  See the SDK for more details
-#endif
-
 // Try and make the best of the old Arduino abs() macro.  When in C++, use
 // the sane std::abs() call, but for C code use their macro since stdlib abs()
 // is int but their macro "works" for everything (with potential side effects)
@@ -165,7 +152,7 @@ constexpr uint64_t __bitset(const int (&a)[N], size_t i = 0U) {
 #define PSRAM __attribute__((section("\".psram\"")))
 
 // General GPIO/ADC layout info
-#if defined(PICO_RP2350) && !PICO_RP2350A
+#ifdef PICO_RP2350B
 #define __GPIOCNT 48
 #define __FIRSTANALOGGPIO 40
 #else

cores/rp2040/Bootsel.h

@@ -20,21 +20,10 @@
 
 #pragma once
 
-/**
-    @brief Wrapper class for polling the BOOTSEL button
-*/
 class __Bootsel {
 public:
     __Bootsel() { }
-    /**
-        @brief Get state of the BOOTSEL pin
-
-        @returns True if BOOTSEL pushed
-    */
     operator bool();
 };
 
-/**
-    @brief BOOTSEL accessor instance
-*/
 extern __Bootsel BOOTSEL;

cores/rp2040/IPAddress.h

@@ -1,2 +1 @@
 #include "api/IPAddress.h"
-using arduino::IPAddress;

cores/rp2040/PIOProgram.cpp

@@ -53,6 +53,16 @@ bool PIOProgram::prepare(PIO *pio, int *sm, int *offset, int start, int cnt) {
     CoreMutex m(&_pioMutex);
     PIO pi[PIOCNT] = { PIOS };
 
+#if 0
+    uint usm;
+    uint uoff;
+    auto ret = pio_claim_free_sm_and_add_program_for_gpio_range(_pgm, pio, &usm, &uoff, start, cnt, true);
+    *sm = usm;
+    *offset = uoff;
+    DEBUGV("clain %d\n", ret);
+    return ret;
+#endif
+
     uint gpioBaseNeeded = ((start + cnt) >= 32) ? 16 : 0;
     DEBUGV("PIOProgram %p: Searching for base=%d, pins %d-%d\n", _pgm, gpioBaseNeeded, start, start + cnt - 1);
 

cores/rp2040/RP2040Support.h

@@ -182,16 +182,13 @@ extern "C" void loop1() __attribute__((weak));
 extern "C" bool core1_separate_stack;
 extern "C" uint32_t* core1_separate_stack_address;
 
-/**
-    @brief RP2040/RP2350 helper function for HW-specific features
-*/
 class RP2040 {
 public:
     RP2040()  { /* noop */ }
     ~RP2040() { /* noop */ }
 
-    void begin(int cpuid) {
-        _epoch[cpuid] = 0;
+    void begin() {
+        _epoch = 0;
 #if !defined(__riscv) && !defined(__PROFILE)
         if (!__isFreeRTOS) {
             // Enable SYSTICK exception
@@ -200,70 +197,43 @@ public:
             systick_hw->rvr = 0x00FFFFFF;
         } else {
 #endif
-            // Only start 1 instance of the PIO SM
-            if (cpuid == 0) {
             int off = 0;
             _ccountPgm = new PIOProgram(&ccount_program);
             _ccountPgm->prepare(&_pio, &_sm, &off);
             ccount_program_init(_pio, _sm, off);
             pio_sm_set_enabled(_pio, _sm, true);
-            }
 #if !defined(__riscv) && !defined(__PROFILE)
         }
 #endif
     }
 
-    /**
-        @brief Convert from microseconds to PIO clock cycles
-
-        @returns the PIO cycles for a given microsecond delay
-    */
+    // Convert from microseconds to PIO clock cycles
     static int usToPIOCycles(int us) {
         // Parenthesis needed to guarantee order of operations to avoid 32bit overflow
         return (us * (clock_get_hz(clk_sys) / 1'000'000));
     }
 
-    /**
-        @brief Gets the active CPU speed (may differ from F_CPU
-
-        @returns CPU frequency in Hz
-    */
+    // Get current clock frequency
     static int f_cpu() {
         return clock_get_hz(clk_sys);
     }
 
-    /**
-        @brief Get the core ID that is currently executing this code
-
-        @returns 0 for Core 0, 1 for Core 1
-    */
+    // Get current CPU core number
     static int cpuid() {
         return sio_hw->cpuid;
     }
 
-    /**
-        @brief CPU cycle counter epoch (24-bit cycle).  For internal use
-    */
-    volatile uint64_t _epoch[2] = {};
-    /**
-        @brief Get the count of CPU clock cycles since power on.
-
-        @details
-        The 32-bit count will overflow every 4 billion cycles, so consider using ``getCycleCount64`` for
-        longer measurements
-
-        @returns CPU clock cycles since power up
-    */
+    // Get CPU cycle count.  Needs to do magic to extens 24b HW to something longer
+    volatile uint64_t _epoch = 0;
     inline uint32_t getCycleCount() {
 #if !defined(__riscv) && !defined(__PROFILE)
-        // Get CPU cycle count.  Needs to do magic to extend 24b HW to something longer
         if (!__isFreeRTOS) {
             uint32_t epoch;
             uint32_t ctr;
             do {
-                epoch = (uint32_t)_epoch[sio_hw->cpuid];
+                epoch = (uint32_t)_epoch;
                 ctr = systick_hw->cvr;
-            } while (epoch != (uint32_t)_epoch[sio_hw->cpuid]);
+            } while (epoch != (uint32_t)_epoch);
             return epoch + (1 << 24) - ctr; /* CTR counts down from 1<<24-1 */
         } else {
 #endif
@@ -272,20 +242,16 @@ public:
         }
 #endif
     }
-    /**
-        @brief Get the count of CPU clock cycles since power on as a 64-bit quantrity
 
-        @returns CPU clock cycles since power up
-    */
     inline uint64_t getCycleCount64() {
 #if !defined(__riscv) && !defined(__PROFILE)
         if (!__isFreeRTOS) {
             uint64_t epoch;
             uint64_t ctr;
             do {
-                epoch = _epoch[sio_hw->cpuid];
+                epoch = _epoch;
                 ctr = systick_hw->cvr;
-            } while (epoch != _epoch[sio_hw->cpuid]);
+            } while (epoch != _epoch);
             return epoch + (1LL << 24) - ctr;
         } else {
 #endif
@@ -295,53 +261,23 @@ public:
 #endif
     }
 
-    /**
-        @brief Gets total unused heap (dynamic memory)
-
-        @details
-        Note that the allocations of the size of the total free heap may fail due to fragmentation.
-        For example, ``getFreeHeap`` can report 100KB available, but an allocation of 90KB may fail
-        because there may not be a contiguous 90KB space available
-
-        @returns Free heap in bytes
-    */
     inline int getFreeHeap() {
         return getTotalHeap() - getUsedHeap();
     }
 
-    /**
-        @brief Gets total used heap (dynamic memory)
-
-        @returns Used heap in bytes
-    */
     inline int getUsedHeap() {
         struct mallinfo m = mallinfo();
         return m.uordblks;
     }
 
-    /**
-        @brief Gets total heap (dynamic memory) compiled into the program
-
-        @returns Total heap size in bytes
-    */
     inline int getTotalHeap() {
         return &__StackLimit  - &__bss_end__;
     }
 
-    /**
-        @brief On the RP2350, returns the amount of heap (dynamic memory) available in PSRAM
-
-        @returns Total free heap in PSRAM, or 0 if no PSRAM present
-    */
     inline int getFreePSRAMHeap() {
         return getTotalPSRAMHeap() - getUsedPSRAMHeap();
     }
 
-    /**
-        @brief On the RP2350, returns the total amount of PSRAM heap (dynamic memory) used
-
-        @returns Bytes used in PSRAM, or 0 if no PSRAM present
-    */
     inline int getUsedPSRAMHeap() {
 #if defined(RP2350_PSRAM_CS)
         extern size_t __psram_total_used();
@@ -351,11 +287,6 @@ public:
 #endif
     }
 
-    /**
-        @brief On the RP2350, gets total heap (dynamic memory) compiled into the program
-
-        @returns Total PSRAM heap size in bytes, or 0 if no PSRAM present
-    */
     inline int getTotalPSRAMHeap() {
 #if defined(RP2350_PSRAM_CS)
         extern size_t __psram_total_space();
@@ -365,11 +296,6 @@ public:
 #endif
     }
 
-    /**
-        @brief Gets the current stack pointer in a ARM/RISC-V safe manner
-
-        @returns Current SP
-    */
     inline uint32_t getStackPointer() {
         uint32_t *sp;
 #if defined(__riscv)
@@ -380,14 +306,6 @@ public:
         return (uint32_t)sp;
     }
 
-    /**
-        @brief Calculates approximately how much stack space is still available for the running core.  Handles multiprocessing and separate stacks.
-
-        @details
-        Not valid in FreeRTOS.  Use the FreeRTOS internal functions to access this information.
-
-        @returns Approximation of the amount of stack available for use on the specific core
-    */
     inline int getFreeStack() {
         const unsigned int sp = getStackPointer();
         uint32_t ref = 0x20040000;
@@ -401,11 +319,6 @@ public:
         return sp - ref;
     }
 
-    /**
-        @brief On the RP2350, gets the size of attached PSRAM
-
-        @returns PSRAM size in bytes, or 0 if no PSRAM present
-    */
     inline size_t getPSRAMSize() {
 #if defined(RP2350_PSRAM_CS)
         extern size_t __psram_size;
@@ -415,48 +328,20 @@ public:
 #endif
     }
 
-    /**
-        @brief Freezes the other core in a flash-write-safe state.  Not generally needed by applications
-
-        @details
-        When the external flash chip is erasing or writing, the Pico cannot fetch instructions from it.
-        In this case both the core doing the writing and the other core (if active) need to run from a
-        routine that's contained in RAM.  This call forces the other core into a tight, RAM-based loop
-        safe for this operation.  When flash erase/write is completed, ``resumeOtherCore`` to return
-        it to operation.
-
-        Be sure to disable any interrupts or task switches before calling to avoid deadlocks.
-
-        If the second core is not started, this is a no-op.
-    */
     void idleOtherCore() {
         fifo.idleOtherCore();
     }
 
-    /**
-        @brief Resumes normal operation of the other core
-    */
     void resumeOtherCore() {
         fifo.resumeOtherCore();
     }
 
-    /**
-        @brief Hard resets the 2nd core (CORE1).
-
-        @details
-        Because core1 will restart with the heap and global variables not in the same state as
-        power-on, this call may not work as desired and a full CPU reset may be necessary in
-        certain cases.
-    */
     void restartCore1() {
         multicore_reset_core1();
         fifo.clear();
         multicore_launch_core1(main1);
     }
 
-    /**
-        @brief Warm-reboots the chip in normal mode
-    */
     void reboot() {
         watchdog_reboot(0, 0, 10);
         while (1) {
@@ -464,16 +349,10 @@ public:
         }
     }
 
-    /**
-        @brief Warm-reboots the chip in normal mode
-    */
     inline void restart() {
         reboot();
     }
 
-    /**
-        @brief Warm-reboots the chip into the USB bootloader mode
-    */
     inline void rebootToBootloader() {
         reset_usb_boot(0, 0);
         while (1) {
@@ -485,32 +364,16 @@ public:
     static void enableDoubleResetBootloader();
 #endif
 
-    /**
-        @brief Starts the hardware watchdog timer.  The CPU will reset if the watchdog is not fed every delay_ms
-
-        @param [in] delay_ms Milliseconds without a wdt_reset before rebooting
-    */
     void wdt_begin(uint32_t delay_ms) {
         watchdog_enable(delay_ms, 1);
     }
 
-    /**
-        @brief Feeds the watchdog timer, resetting it for another delay_ms countdown
-    */
     void wdt_reset() {
         watchdog_update();
     }
 
-    /**
-        @brief Best-effort reasons for chip reset
-    */
     enum resetReason_t {UNKNOWN_RESET, PWRON_RESET, RUN_PIN_RESET, SOFT_RESET, WDT_RESET, DEBUG_RESET, GLITCH_RESET, BROWNOUT_RESET};
 
-    /**
-        @brief Attempts to determine the reason for the last chip reset.  May not always be able to determine accurately
-
-        @returns Reason for reset
-    */
     resetReason_t getResetReason(void) {
         io_rw_32 *WD_reason_reg = (io_rw_32 *)(WATCHDOG_BASE + WATCHDOG_REASON_OFFSET);
 
@@ -564,10 +427,6 @@ public:
         return UNKNOWN_RESET;
     }
 
-    /**
-        @brief Get unique ID string for the running board
-        @returns String with the unique board ID as determined by the SDK
-    */
     const char *getChipID() {
         static char id[2 * PICO_UNIQUE_BOARD_ID_SIZE_BYTES + 1] = { 0 };
         if (!id[0]) {
@@ -578,17 +437,6 @@ public:
 
 #pragma GCC push_options
 #pragma GCC optimize ("Os")
-    /**
-        @brief Perform a memcpy using a DMA engine for speed
-
-        @details
-        Uses the DMA to copy to and from RAM.  Only works on 4-byte aligned, 4-byte multiple length
-        sources and destination (i.e. word-aligned, word-length).  Falls back to normal memcpy otherwise.
-
-        @param [out] dest Memcpy destination, 4-byte aligned
-        @param [in] src Memcpy source, 4-byte aligned
-        @param [in] n Count in bytes to transfer (should be a multiple of 4 bytes)
-    */
     void *memcpyDMA(void *dest, const void *src, size_t n) {
         // Allocate a DMA channel on 1st call, reuse it every call after
         if (memcpyDMAChannel < 1) {
@@ -617,32 +465,14 @@ public:
     }
 #pragma GCC pop_options
 
-    /**
-        @brief Multicore communications FIFO
-    */
+    // Multicore comms FIFO
     _MFIFO fifo;
 
 
-    /**
-        @brief Return a 32-bit from the hardware random number generator
-
-        @returns Random value using appropriate hardware (RP2350 has true RNG, RP2040 has a less true RNG method)
-    */
     uint32_t hwrand32() {
         return get_rand_32();
     }
 
-    /**
-        @brief Determines if code is running on a Pico or a PicoW
-
-        @details
-        Code compiled for the RP2040 PicoW can run on the RP2040 Pico.  This call lets an application
-        identify if the current device is really a Pico or PicoW and handle appropriately.  For
-        the RP2350, this runtime detection is not available and the call returns whether it was
-        compiled for the CYW43 WiFi driver
-
-        @returns True if running on a PicoW board with CYW43 WiFi chip.
-    */
     bool isPicoW() {
 #if !defined(PICO_CYW43_SUPPORTED)
         return false;
@@ -669,8 +499,8 @@ public:
 
 
 private:
-    static void __no_inline_not_in_flash_func(_SystickHandler)() {
-        rp2040._epoch[sio_hw->cpuid] += 1LL << 24;
+    static void _SystickHandler() {
+        rp2040._epoch += 1LL << 24;
     }
     PIO _pio;
     int _sm;

cores/rp2040/RP2040Version.h

@@ -1,5 +1,5 @@
 #pragma once
 #define ARDUINO_PICO_MAJOR 4
-#define ARDUINO_PICO_MINOR 5
-#define ARDUINO_PICO_REVISION 4
-#define ARDUINO_PICO_VERSION_STR "4.5.4"
+#define ARDUINO_PICO_MINOR 4
+#define ARDUINO_PICO_REVISION 3
+#define ARDUINO_PICO_VERSION_STR "4.4.3"

cores/rp2040/Semihosting.h

@@ -24,9 +24,7 @@
 
 // Input/output will be handled by OpenOCD
 
-/**
-    @brief Semihosting host API opcodes, from https://developer.arm.com/documentation/dui0471/g/Semihosting/Semihosting-operations?lang=en
-*/
+// From https://developer.arm.com/documentation/dui0471/g/Semihosting/Semihosting-operations?lang=en
 typedef enum {
     SEMIHOST_SYS_CLOSE = 0x02,
     SEMIHOST_SYS_CLOCK = 0x10,
@@ -54,13 +52,7 @@ typedef enum {
 
 #ifdef __arm__
 
-/**
-    @brief Execute a semihosted request, from https://github.com/ErichStyger/mcuoneclipse/blob/master/Examples/MCUXpresso/FRDM-K22F/FRDM-K22F_Semihosting/source/McuSemihost.c
-
-    @param [in] reason Opcode to execute
-    @param [in] arg Any arguments for the opcode
-    @returns Result of operation
-*/
+// From https://github.com/ErichStyger/mcuoneclipse/blob/master/Examples/MCUXpresso/FRDM-K22F/FRDM-K22F_Semihosting/source/McuSemihost.c
 static inline int __attribute__((always_inline)) Semihost(int reason, void *arg) {
     int value;
     __asm volatile(
@@ -77,13 +69,7 @@ static inline int __attribute__((always_inline)) Semihost(int reason, void *arg)
 }
 #else
 
-/**
-    @brief Execute a semihosted request, from https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/n-5VQ9PHZ4w/m/KbzH5t9MBgAJ
-
-    @param [in] reason Opcode to execute
-    @param [in] argPack Any arguments for the opcode
-    @returns Result of operation
-*/
+// https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/n-5VQ9PHZ4w/m/KbzH5t9MBgAJ
 static inline int __attribute__((always_inline)) Semihost(int reason, void *argPack) {
     register int value asm("a0") = reason;
     register void *ptr asm("a1") = argPack;

cores/rp2040/SerialPIO.cpp

@@ -68,10 +68,13 @@ static PIOProgram *_getRxProgram(int bits) {
 }
 // ------------------------------------------------------------------------
 
-static int __not_in_flash_func(_parity)(int data) {
-    data ^= data >> 4;
-    data &= 0xf;
-    return (0x6996 >> data) & 1;
+// TODO - this works, but there must be a faster/better way...
+static int _parity(int bits, int data) {
+    int p = 0;
+    for (int b = 0; b < bits; b++) {
+        p ^= (data & (1 << b)) ? 1 : 0;
+    }
+    return p;
 }
 
 // We need to cache generated SerialPIOs so we can add data to them from
@@ -95,16 +98,20 @@ void __not_in_flash_func(SerialPIO::_handleIRQ)() {
     }
     while (!pio_sm_is_rx_fifo_empty(_rxPIO, _rxSM)) {
         uint32_t decode = _rxPIO->rxf[_rxSM];
-        uint32_t val = decode >> (32 - _rxBits - 1);
+        decode >>= 33 - _rxBits;
+        uint32_t val = 0;
+        for (int b = 0; b < _bits + 1; b++) {
+            val |= (decode & (1 << (b * 2))) ? 1 << b : 0;
+        }
         if (_parity == UART_PARITY_EVEN) {
-            int p = ::_parity(val);
+            int p = ::_parity(_bits, val);
             int r = (val & (1 << _bits)) ? 1 : 0;
             if (p != r) {
                 // TODO - parity error
                 continue;
             }
         } else if (_parity == UART_PARITY_ODD) {
-            int p = ::_parity(val);
+            int p = ::_parity(_bits, val);
             int r = (val & (1 << _bits)) ? 1 : 0;
             if (p == r) {
                 // TODO - parity error
@@ -227,7 +234,7 @@ void SerialPIO::begin(unsigned long baud, uint16_t config) {
         _writer = 0;
         _reader = 0;
 
-        _rxBits = _bits + (_parity != UART_PARITY_NONE ? 1 : 0);
+        _rxBits = 2 * (_bits + _stop + (_parity != UART_PARITY_NONE ? 1 : 0) + 1) - 1;
         _rxPgm = _getRxProgram(_rxBits);
         int off;
         if (!_rxPgm->prepare(&_rxPIO, &_rxSM, &off, _rx, 1)) {
@@ -242,7 +249,7 @@ void SerialPIO::begin(unsigned long baud, uint16_t config) {
         pio_sm_clear_fifos(_rxPIO, _rxSM); // Remove any existing data
 
         // Put phase divider into OSR w/o using add'l program memory
-        pio_sm_put_blocking(_rxPIO, _rxSM, clock_get_hz(clk_sys) / (_baud * 2) - 3);
+        pio_sm_put_blocking(_rxPIO, _rxSM, clock_get_hz(clk_sys) / (_baud * 2) - 7 /* insns in PIO halfbit loop */);
         pio_sm_exec(_rxPIO, _rxSM, pio_encode_pull(false, false));
 
         // Join the TX FIFO to the RX one now that we don't need it
@@ -371,10 +378,10 @@ size_t SerialPIO::write(uint8_t c) {
     if (_parity == UART_PARITY_NONE) {
         val |= 7 << _bits; // Set 2 stop bits, the HW will only transmit the required number
     } else if (_parity == UART_PARITY_EVEN) {
-        val |= ::_parity(c) << _bits;
+        val |= ::_parity(_bits, c) << _bits;
         val |= 7 << (_bits + 1);
     } else {
-        val |= (1 ^ ::_parity(c)) << _bits;
+        val |= (1 ^ ::_parity(_bits, c)) << _bits;
         val |= 7 << (_bits + 1);
     }
     val <<= 1;  // Start bit = low

cores/rp2040/SerialUART.cpp

@@ -32,20 +32,15 @@ extern void serialEvent1() __attribute__((weak));
 extern void serialEvent2() __attribute__((weak));
 
 bool SerialUART::setRX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
-    constexpr uint64_t valid[2] = { __bitset({1, 3, 13, 15, 17, 19, 29, 31, 33, 35, 45, 47}) /* UART0 */,
-                                    __bitset({5, 7, 9, 11, 21, 23, 25, 27, 37, 39, 41, 43})  /* UART1 */
-                                  };
-#elif defined(PICO_RP2350)
-    constexpr uint64_t valid[2] = { __bitset({1, 3, 13, 15, 17, 19, 29})     /* UART0 */,
-                                    __bitset({5, 7, 9, 11, 21, 23, 25, 27})  /* UART1 */
+#ifdef PICO_RP2350B
+    constexpr uint64_t valid[2] = { __bitset({1, 13, 17, 29, 33, 45}) /* UART0 */,
+                                    __bitset({5, 9, 21, 25, 37, 41})  /* UART1 */
                                   };
 #else
     constexpr uint64_t valid[2] = { __bitset({1, 13, 17, 29}) /* UART0 */,
                                     __bitset({5, 9, 21, 25})  /* UART1 */
                                   };
 #endif
-
     if ((!_running) && ((1LL << pin) & valid[uart_get_index(_uart)])) {
         _rx = pin;
         return true;
@@ -64,13 +59,9 @@ bool SerialUART::setRX(pin_size_t pin) {
 }
 
 bool SerialUART::setTX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
-    constexpr uint64_t valid[2] = { __bitset({0, 2, 12, 14, 16, 18, 28, 30, 32, 34, 44, 46}) /* UART0 */,
-                                    __bitset({4, 6, 8, 10, 20, 22, 24, 26, 36, 38, 40, 42})  /* UART1 */
-                                  };
-#elif defined(PICO_RP2350)
-    constexpr uint64_t valid[2] = { __bitset({0, 2, 12, 14, 16, 18, 28})     /* UART0 */,
-                                    __bitset({4, 6, 8, 10, 20, 22, 24, 26})  /* UART1 */
+#ifdef PICO_RP2350B
+    constexpr uint64_t valid[2] = { __bitset({0, 12, 16, 28, 32, 44}) /* UART0 */,
+                                    __bitset({4, 8, 20, 24, 36, 40})  /* UART1 */
                                   };
 #else
     constexpr uint64_t valid[2] = { __bitset({0, 12, 16, 28}) /* UART0 */,
@@ -95,7 +86,7 @@ bool SerialUART::setTX(pin_size_t pin) {
 }
 
 bool SerialUART::setRTS(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({3, 15, 19, 31, 35, 47}) /* UART0 */,
                                     __bitset({7, 11, 23, 27, 39, 43})  /* UART1 */
                                   };
@@ -122,7 +113,7 @@ bool SerialUART::setRTS(pin_size_t pin) {
 }
 
 bool SerialUART::setCTS(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({2, 14, 18, 30, 34, 46}) /* UART0 */,
                                     __bitset({6, 10, 22, 26, 38, 42})  /* UART1 */
                                   };
@@ -179,41 +170,6 @@ SerialUART::SerialUART(uart_inst_t *uart, pin_size_t tx, pin_size_t rx, pin_size
 static void _uart0IRQ();
 static void _uart1IRQ();
 
-// Does the selected TX/RX need UART_AUX function (rp2350)
-static gpio_function_t __gpioFunction(int pin) {
-    switch (pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A
-    case 2:
-    case 3:
-    case 6:
-    case 7:
-    case 10:
-    case 11:
-    case 14:
-    case 15:
-    case 18:
-    case 19:
-    case 22:
-    case 23:
-    case 26:
-    case 27:
-    case 30:
-    case 31:
-    case 34:
-    case 35:
-    case 38:
-    case 39:
-    case 42:
-    case 43:
-    case 46:
-    case 47:
-        return GPIO_FUNC_UART_AUX;
-#endif
-    default:
-        return GPIO_FUNC_UART;
-    }
-}
-
 void SerialUART::begin(unsigned long baud, uint16_t config) {
     if (_running) {
         end();
@@ -224,9 +180,9 @@ void SerialUART::begin(unsigned long baud, uint16_t config) {
 
     _fcnTx = gpio_get_function(_tx);
     _fcnRx = gpio_get_function(_rx);
-    gpio_set_function(_tx, __gpioFunction(_tx));
+    gpio_set_function(_tx, GPIO_FUNC_UART);
     gpio_set_outover(_tx, _invertTX ? 1 : 0);
-    gpio_set_function(_rx, __gpioFunction(_rx));
+    gpio_set_function(_rx, GPIO_FUNC_UART);
     gpio_set_inover(_rx, _invertRX ? 1 : 0);
     if (_rts != UART_PIN_NOT_DEFINED) {
         _fcnRts = gpio_get_function(_rts);

cores/rp2040/SoftwareSerial.h

@@ -22,18 +22,9 @@
 
 #include "SerialPIO.h"
 
-/**
-    @brief Implements a UART port using PIO for input and output
-*/
 class SoftwareSerial : public SerialPIO {
 public:
-    /**
-        @brief Constructs a PIO-based UART
-
-        @param [in] rx GPIO for RX pin or -1 for transmit-only
-        @param [in] tx GPIO for TX pin or -1 for receive-only
-        @param [in] invert True to invert the receive and transmit lines
-    */
+    // Note the rx/tx pins are swapped in PIO vs SWSerial
     SoftwareSerial(pin_size_t rx, pin_size_t tx, bool invert = false) : SerialPIO(tx, rx) {
         _invert = invert;
     }
@@ -41,37 +32,18 @@ public:
     ~SoftwareSerial() {
     }
 
-    /**
-        @brief Starts the PIO UART
-
-        @param [in] baud Serial bit rate
-    */
     virtual void begin(unsigned long baud = 115200) override {
         begin(baud, SERIAL_8N1);
     };
 
-    /**
-        @brief Starts the PIO UART
-
-        @param [in] baud Serial bit rate
-        @param [in] config Start/Stop/Len configuration (i.e. SERIAL_8N1 or SERIAL_7E2)
-    */
     void begin(unsigned long baud, uint16_t config) override {
         setInvertTX(_invert);
         setInvertRX(_invert);
         SerialPIO::begin(baud, config);
     }
 
-    /**
-        @brief No-op on this core
-    */
     void listen() { /* noop */ }
 
-    /**
-        @brief No-op on this core
-
-        @returns True always
-    */
     bool isListening() {
         return true;
     }

cores/rp2040/ccount.pio.h

@@ -28,7 +28,7 @@ static const struct pio_program ccount_program = {
     .instructions = ccount_program_instructions,
     .length = 2,
     .origin = -1,
-    .pio_version = ccount_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif

cores/rp2040/main.cpp

@@ -22,11 +22,7 @@
 #include "RP2040USB.h"
 #include <pico/stdlib.h>
 #include <pico/multicore.h>
-#include <hardware/vreg.h>
 #include <reent.h>
-#ifdef RP2350_PSRAM_CS
-#include "psram.h"
-#endif
 
 RP2040 rp2040;
 extern "C" {
@@ -51,14 +47,9 @@ void initVariant() { }
 
 // Optional 2nd core setup and loop
 bool core1_separate_stack __attribute__((weak)) = false;
-bool core1_disable_systick __attribute__((weak)) = false;
 extern void setup1() __attribute__((weak));
 extern void loop1() __attribute__((weak));
 extern "C" void main1() {
-    if (!core1_disable_systick) {
-        // Don't install the SYSTICK exception handler. rp2040.getCycleCount will not work properly on core1
-        rp2040.begin(1);
-    }
     rp2040.fifo.registerCore();
     if (setup1) {
         setup1();
@@ -89,41 +80,9 @@ static struct _reent *_impure_ptr1 = nullptr;
 
 extern "C" int main() {
 #if (defined(PICO_RP2040) && (F_CPU != 125000000)) || (defined(PICO_RP2350) && (F_CPU != 150000000))
-
-#if defined(PICO_RP2040)
-    // From runtime_init_clocks() to bump up RP2040 V for 200Mhz+ operation
-    if ((F_CPU > 133000000) && (vreg_get_voltage() < VREG_VOLTAGE_1_15)) {
-        vreg_set_voltage(VREG_VOLTAGE_1_15);
-        // wait for voltage to settle; must use CPU cycles as TIMER is not yet clocked correctly
-        busy_wait_at_least_cycles((uint32_t)((SYS_CLK_VREG_VOLTAGE_AUTO_ADJUST_DELAY_US * (uint64_t)XOSC_HZ) / 1000000));
-    }
-#endif
-
-#if defined(RP2350_PSRAM_CS) && (F_CPU > 150000000)
-    // Need to increase the qmi divider before upping sysclk to ensure we keep the output sck w/in legal bounds
-    psram_reinit_timing(F_CPU);
-    // Per datasheet, need to do a dummy access and memory barrier before it takes effect
-    extern uint8_t __psram_start__;
-    volatile uint8_t *x = &__psram_start__;
-    *x ^= 0xff;
-    *x ^= 0xff;
-    asm volatile("" ::: "memory");
-#endif
-
     set_sys_clock_khz(F_CPU / 1000, true);
-
-#if defined(RP2350_PSRAM_CS) && (F_CPU < 150000000)
-    psram_reinit_timing();
-    // Per datasheet, need to do a dummy access and memory barrier before it takes effect
-    extern uint8_t __psram_start__;
-    volatile uint8_t *x = &__psram_start__;
-    *x ^= 0xff;
-    *x ^= 0xff;
-    asm volatile("" ::: "memory");
 #endif
 
-#endif // over/underclock
-
     // Let rest of core know if we're using FreeRTOS
     __isFreeRTOS = initFreeRTOS ? true : false;
 
@@ -133,7 +92,7 @@ extern "C" int main() {
         _REENT_INIT_PTR(_impure_ptr1);
     }
 
-    rp2040.begin(0);
+    rp2040.begin();
 
     initVariant();
 
@@ -244,10 +203,3 @@ void hexdump(const void* mem, uint32_t len, uint8_t cols) {
 }
 
 const String emptyString = "";
-
-extern "C" void __attribute__((__noreturn__)) __wrap___stack_chk_fail() {
-    while (true) {
-        panic("*** stack smashing detected ***: terminated\n");
-    }
-}
-

cores/rp2040/pio_uart.pio

@@ -73,25 +73,20 @@ static inline void pio_tx_program_init(PIO pio, uint sm, uint offset, uint pin_t
 ; IN pin 0 and JMP pin are both mapped to the GPIO used as UART RX.
 
 start:
-    set x, 18           ; Preload bit counter...overwritten by the app
+    set x, 18           ; Preload bit counter...we'll shift in the start bit and stop bit, and each bit will be double-recorded (to be fixed by RP2040 code)
     wait 0 pin 0        ; Stall until start bit is asserted
 
+bitloop:
    ; Delay until 1/2 way into the bit time
     mov y, osr
-wait_mid_start:
-    jmp y-- wait_mid_start
+wait_half:
+    jmp y-- wait_half
 
-bitloop:
-    mov y, osr
-bitloop1:
-    jmp y-- bitloop1
-    mov y, osr
-bitloop2:
-    jmp y-- bitloop2
+    ; Read in the bit
+    in pins, 1          ; Shift data bit into ISR
+    jmp x-- bitloop     ; Loop all bits
     
-    in pins, 1
-    jmp x-- bitloop
-    push
+    push                ; Stuff it and wait for next start
 
 % c-sdk {
 static inline void pio_rx_program_init(PIO pio, uint sm, uint offset, uint pin) {

cores/rp2040/pio_uart.pio.h

@@ -32,7 +32,7 @@ static const struct pio_program pio_tx_program = {
     .instructions = pio_tx_program_instructions,
     .length = 6,
     .origin = -1,
-    .pio_version = pio_tx_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -71,7 +71,7 @@ static inline void pio_tx_program_init(PIO pio, uint sm, uint offset, uint pin_t
 // ------ //
 
 #define pio_rx_wrap_target 0
-#define pio_rx_wrap 10
+#define pio_rx_wrap 6
 #define pio_rx_pio_version 0
 
 static const uint16_t pio_rx_program_instructions[] = {
@@ -80,22 +80,18 @@ static const uint16_t pio_rx_program_instructions[] = {
     0x2020, //  1: wait   0 pin, 0
     0xa047, //  2: mov    y, osr
     0x0083, //  3: jmp    y--, 3
-    0xa047, //  4: mov    y, osr
-    0x0085, //  5: jmp    y--, 5
-    0xa047, //  6: mov    y, osr
-    0x0087, //  7: jmp    y--, 7
-    0x4001, //  8: in     pins, 1
-    0x0044, //  9: jmp    x--, 4
-    0x8020, // 10: push   block
+    0x4001, //  4: in     pins, 1
+    0x0042, //  5: jmp    x--, 2
+    0x8020, //  6: push   block
     //     .wrap
 };
 
 #if !PICO_NO_HARDWARE
 static const struct pio_program pio_rx_program = {
     .instructions = pio_rx_program_instructions,
-    .length = 11,
+    .length = 7,
     .origin = -1,
-    .pio_version = pio_rx_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif

cores/rp2040/psram.cpp

@@ -195,7 +195,10 @@ static size_t __no_inline_not_in_flash_func(get_psram_size)(void) {
 ///
 /// @note This function expects interrupts to be enabled on entry
 
-static void __no_inline_not_in_flash_func(set_psram_timing)(uint32_t sysHz) {
+static void __no_inline_not_in_flash_func(set_psram_timing)(void) {
+    // Get secs / cycle for the system clock - get before disabling interrupts.
+    uint32_t sysHz = (uint32_t)clock_get_hz(clk_sys);
+
     // Calculate the clock divider - goal to get clock used for PSRAM <= what
     // the PSRAM IC can handle - which is defined in SFE_PSRAM_MAX_SCK_HZ
     volatile uint8_t clockDivider = (sysHz + SFE_PSRAM_MAX_SCK_HZ - 1) / SFE_PSRAM_MAX_SCK_HZ;
@@ -280,7 +283,7 @@ static void __no_inline_not_in_flash_func(runtime_init_setup_psram)(/*uint32_t p
 
     // check our interrupts and setup the timing
     restore_interrupts(intr_stash);
-    set_psram_timing((uint32_t)clock_get_hz(clk_sys));
+    set_psram_timing();
 
     // and now stash interrupts again
     intr_stash = save_and_disable_interrupts();
@@ -320,11 +323,8 @@ static void __no_inline_not_in_flash_func(runtime_init_setup_psram)(/*uint32_t p
 PICO_RUNTIME_INIT_FUNC_RUNTIME(runtime_init_setup_psram, PICO_RUNTIME_INIT_PSRAM);
 
 // update timing -- used if the system clock/timing was changed.
-void psram_reinit_timing(uint32_t hz) {
-    if (!hz) {
-        hz = (uint32_t)clock_get_hz(clk_sys);
-    }
-    set_psram_timing(hz);
+void psram_reinit_timing() {
+    set_psram_timing();
 }
 
 static bool __psram_heap_init() {

cores/rp2040/psram.h

@@ -31,7 +31,7 @@
 
 #include <Arduino.h>
 
-void psram_reinit_timing(uint32_t hz = 0);
+void psram_reinit_timing();
 void *__psram_malloc(size_t size);
 void __psram_free(void *ptr);
 void *__psram_realloc(void *ptr, size_t size);

docs/adc.rst

@@ -12,9 +12,9 @@ need to be periodically sampled to be read by applications, easily, such as:
 * Light dependent resistors (LDR), etc.
 
 
-Up to 4 (or 8 in the case of the RP2350B) analog samples can be recorded by the
-hardware (``A0`` ... ``A3``), and all recording is done at 16-bit levels (but be
-aware that the ADC in the Pico will only ever return values between 0...4095).
+Up to 4 analog samples can be recorded by the hardware (``A0`` ... ``A3``), and all
+recording is done at 16-bit levels (but be aware that the ADC in the Pico will only
+ever return values between 0...4095).
 
 The interface for the ``ADCInput`` device is very similar to the ``I2S`` input
 device, and most code can be ported simply by instantiating a ``ADCInput``
@@ -26,12 +26,11 @@ allowed while in use.
 ADC Input API
 -------------
 
-ADCInput(pin0 [, pin1, pin2, pin3[, pin4, pin5, pin6, pin7])
+ADCInput(pin0 [, pin1, pin2, pin3])
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Creates an ADC input object which will record the pins specified in the code.
-Only pins ``A0`` ... ``A3`` (``A7`` on RP2350B) can be used, and they must be
-specified in increasing order (i.e. ``ADCInput(A0, A1);`` is valid,
-but ``ADCInput(A1, A0)`` is not.
+Only pins ``A0`` ... ``A3`` can be used, and they must be specified in increasing
+order (i.e. ``ADCInput(A0, A1);`` is valid, but ``ADCInput(A1, A0)`` is not.
 
 bool setBuffers(size_t buffers, size_t bufferWords)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

docs/conf.py

@@ -54,9 +54,9 @@ author = u'Earle F. Philhower, III'
 # built documents.
 #
 # The short X.Y version.
-version = u'4.5.4'
+version = u'4.4.3'
 # The full version, including alpha/beta/rc tags.
-release = u'4.5.4'
+release = u'4.4.3'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

docs/contrib.rst

@@ -112,7 +112,7 @@ For only RP2350A variants (using the compile options, not the onboard ID registe
 
 .. code:: cpp
 
-    #if defined(PICO_RP2350A) && PICO_RP2350A
+    #if defined(PICO_RP2350) && !defined(PICO_RP2350B)
     ...RP2350A only code...
     #endif
 
@@ -121,7 +121,7 @@ and not the chip ID register):
 
 .. code:: cpp
 
-    #if defined(PICO_RP2350A) && !PICO_RP2350A
+    #if defined(PICO_RP2350B)
     ...48-GPIO version code here
     #endif
 

docs/multicore.rst

@@ -16,25 +16,6 @@ not necessarily simultaneously!).
 See the ``Multicore.ino`` example in the ``rp2040`` example directory for a
 quick introduction.
 
-Core 1 Operation
-----------------
-
-By default, core1 (the second core) has no non-user written code running on it.
-No interrupts, exceptions, or other background processing is done (but the core
-is still subject to hardware stalls due to on-die memory resource conflicts).
-When flash erase or write operations (i.e. ``LittleFS`` or ``EEPROM``) are called
-from core0, core1 **will** be paused.
-
-If ``rp2040.getCycleCount`` is needed to operate on the second core, then a
-periodic (once ever 16M clock cycles) ``SYSTICK`` exception will happen behind
-the scenes.  For extremely time-critical operations this may not be desirable
-and can be disabled by defining a new ``bool`` variable to ``true`` anywhere
-in your sketch:
-
-.. code:: cpp
-
-    bool core1_disable_systick = true;
-
 Stack Sizes
 -----------
 
@@ -86,9 +67,6 @@ void rp2040.restartCore1()
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Hard resets Core1 from Core 0 and restarts its operation from ``setup1()``.
-This can cause unpredictable behavior because globals and the heap
-are shared between cores and not re-initialized with this call.  Use with
-extreme caution.
 
 Communicating Between Cores
 ---------------------------

include/bearssl/bearssl_git.h

@@ -1,2 +1,2 @@
 // Do not edit -- Automatically generated by tools/sdk/ssl/bearssl/Makefile
-#define BEARSSL_GIT aca1383
+#define BEARSSL_GIT 5b7f3d5

include/rp2040/pico_base/pico/version.h

@@ -13,7 +13,7 @@
 
 #define PICO_SDK_VERSION_MAJOR    2
 #define PICO_SDK_VERSION_MINOR    1
-#define PICO_SDK_VERSION_REVISION 2
-#define PICO_SDK_VERSION_STRING   "2.1.2-develop"
+#define PICO_SDK_VERSION_REVISION 0
+#define PICO_SDK_VERSION_STRING   "2.1.0"
 
 #endif

include/rp2350/pico_base/pico/version.h

@@ -13,7 +13,7 @@
 
 #define PICO_SDK_VERSION_MAJOR    2
 #define PICO_SDK_VERSION_MINOR    1
-#define PICO_SDK_VERSION_REVISION 2
-#define PICO_SDK_VERSION_STRING   "2.1.2-develop"
+#define PICO_SDK_VERSION_REVISION 0
+#define PICO_SDK_VERSION_STRING   "2.1.0"
 
 #endif

lib/core_inc.txt

@@ -54,7 +54,6 @@
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_lwip/include
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_multicore/include
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_platform/include
--iwithprefixbefore/pico-sdk/src/rp2_common/pico_platform_common/include
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_platform_compiler/include
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_platform_sections/include
 -iwithprefixbefore/pico-sdk/src/rp2_common/pico_platform_panic/include

lib/core_wrap.txt

@@ -67,5 +67,3 @@
 -Wl,--wrap=cyw43_tcpip_link_status
 -Wl,--wrap=cyw43_cb_tcpip_init
 -Wl,--wrap=cyw43_cb_tcpip_deinit
-
--Wl,--wrap=__stack_chk_fail

lib/rp2040/platform_inc.txt

@@ -10,6 +10,5 @@
 -iwithprefixbefore/pico-sdk/lib/btstack/src
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/decoder/include
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/encoder/include
--iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/yxml
 -iwithprefixbefore/pico-sdk/lib/btstack/platform/embedded
 -iwithprefixbefore/pico-sdk/src/rp2_common/cmsis/stub/CMSIS/Device/RP2040/Include

lib/rp2350-riscv/platform_def.txt

@@ -1,5 +1,4 @@
 -DPICO_CYW43_ARCH_THREADSAFE_BACKGROUND=1
--DTARGET_RP2350
 -DCYW43_LWIP=1
 -DCYW43_PIO_CLOCK_DIV_DYNAMIC=1
 -DCFG_TUSB_MCU=OPT_MCU_RP2040

lib/rp2350-riscv/platform_inc.txt

@@ -15,5 +15,4 @@
 -iwithprefixbefore/pico-sdk/lib/btstack/src
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/decoder/include
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/encoder/include
--iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/yxml
 -iwithprefixbefore/pico-sdk/lib/btstack/platform/embedded

lib/rp2350/platform_def.txt

@@ -1,5 +1,4 @@
 -DPICO_CYW43_ARCH_THREADSAFE_BACKGROUND=1
--DTARGET_RP2350
 -DCYW43_LWIP=1
 -DCYW43_PIO_CLOCK_DIV_DYNAMIC=1
 -DCFG_TUSB_MCU=OPT_MCU_RP2040

lib/rp2350/platform_inc.txt

@@ -13,5 +13,4 @@
 -iwithprefixbefore/pico-sdk/lib/btstack/src
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/decoder/include
 -iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/bluedroid/encoder/include
--iwithprefixbefore/pico-sdk/lib/btstack/3rd-party/yxml
 -iwithprefixbefore/pico-sdk/lib/btstack/platform/embedded

libraries/ADCInput/src/ADCInput.cpp

@@ -49,7 +49,12 @@ bool ADCInput::setBuffers(size_t buffers, size_t bufferWords) {
 
 int ADCInput::_mask(pin_size_t p) {
     switch (p) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#if !defined(PICO_RP2350B)
+    case 26: return 1;
+    case 27: return 2;
+    case 28: return 4;
+    case 29: return 8;
+#else // Starts at 40 and there are 8 of them
     case 40: return 1;
     case 41: return 2;
     case 42: return 4;
@@ -58,11 +63,6 @@ int ADCInput::_mask(pin_size_t p) {
     case 45: return 32;
     case 46: return 64;
     case 47: return 128;
-#else
-    case 26: return 1;
-    case 27: return 2;
-    case 28: return 4;
-    case 29: return 8;
 #endif
     default: return 0;
     }
@@ -106,7 +106,7 @@ bool ADCInput::begin() {
     // Set up the GPIOs to go to ADC
     adc_init();
     int cnt = 0;
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#if !defined(PICO_RP2350B)
     int startpin = 26;
     int maxpin = 29;
 #else

libraries/Adafruit_TinyUSB_Arduino

@@ -1 +1 @@
-Subproject commit 6b772c0ac4a8158011a738e794463a2fe4e84a33
+Subproject commit c92b7fde169fceb6b375f6f95a69412caf2d1f0f

libraries/BTstackLib/src/BTstackLib.cpp

@@ -196,7 +196,7 @@ static void extract_service(gatt_client_service_t * service, uint8_t * packet) {
     service->start_group_handle = little_endian_read_16(packet, 4);
     service->end_group_handle   = little_endian_read_16(packet, 6);
     service->uuid16 = 0;
-    reverse_128(&packet[12], service->uuid128);
+    reverse_128(&packet[8], service->uuid128);
     if (uuid_has_bluetooth_prefix(service->uuid128)) {
         service->uuid16 = big_endian_read_32(service->uuid128, 0);
     }

libraries/BluetoothAudio/src/A2DPSource.cpp

@@ -223,7 +223,7 @@ size_t A2DPSource::write(const uint8_t *buffer, size_t size) {
     size = std::min((size_t)availableForWrite(), size);
 
     size_t count = 0;
-    size /= sizeof(int16_t); // Convert size to samples
+    size /= 2;
 
     // First copy from writer to either end of
     uint32_t start = _pcmWriter;
@@ -262,7 +262,7 @@ int A2DPSource::availableForWrite() {
     } else {
         avail = _pcmBufferSize - _pcmWriter + _pcmReader - 1;
     }
-    avail *= sizeof(int16_t); // Convert samples to bytes
+    avail /= sizeof(uint32_t); // availableForWrite always 32b sample pairs in this core...
     return avail;
 }
 

libraries/BluetoothAudio/src/A2DPSource.h

@@ -125,14 +125,6 @@ public:
         return _hci.scan(mask, scanTimeSec, async);
     }
 
-    bool scanAsyncDone() {
-        return _hci.scanAsyncDone();
-    }
-
-    std::vector<BTDeviceInfo> scanAsyncResult() {
-        return _hci.scanAsyncResult();
-    }
-
     bool connect(const uint8_t *addr = nullptr);
 
     bool connected() {
@@ -159,7 +151,6 @@ public:
     }
 
     // from Print (see notes on write() methods below)
-    // Writes only full samples (size must be divisible by sample size in bytes)
     virtual size_t write(const uint8_t *buffer, size_t size) override;
     virtual int availableForWrite() override;
 

libraries/I2S/src/I2S.cpp

@@ -178,7 +178,7 @@ bool I2S::setLSBJFormat() {
 }
 
 bool I2S::setTDMFormat() {
-    if (_running || !_isOutput) {
+    if (_running || !_isOutput || _isInput) {
         return false;
     }
     _isTDM = true;
@@ -186,7 +186,7 @@ bool I2S::setTDMFormat() {
 }
 
 bool I2S::setTDMChannels(int channels) {
-    if (_running || !_isOutput) {
+    if (_running || !_isOutput || _isInput) {
         return false;
     }
     _tdmChannels = channels;
@@ -255,9 +255,9 @@ bool I2S::begin() {
     _isHolding = 0;
     int off = 0;
     if (!_swapClocks) {
-        _i2s = new PIOProgram(_isOutput ? (_isInput ? (_isTDM ? &pio_tdm_inout_program : &pio_i2s_inout_program) : (_isTDM ? &pio_tdm_out_program : (_isLSBJ ? &pio_lsbj_out_program : &pio_i2s_out_program))) : &pio_i2s_in_program);
+        _i2s = new PIOProgram(_isOutput ? (_isInput ? &pio_i2s_inout_program : (_isTDM ? &pio_tdm_out_program : (_isLSBJ ? &pio_lsbj_out_program : &pio_i2s_out_program))) : &pio_i2s_in_program);
     } else {
-        _i2s = new PIOProgram(_isOutput ? (_isInput ? (_isTDM ? &pio_tdm_inout_swap_program : &pio_i2s_inout_swap_program) : (_isTDM ? &pio_tdm_out_swap_program : (_isLSBJ ? &pio_lsbj_out_swap_program : &pio_i2s_out_swap_program))) : &pio_i2s_in_swap_program);
+        _i2s = new PIOProgram(_isOutput ? (_isInput ? &pio_i2s_inout_swap_program : (_isTDM ? &pio_tdm_out_swap_program : (_isLSBJ ? &pio_lsbj_out_swap_program : &pio_i2s_out_swap_program))) : &pio_i2s_in_swap_program);
     }
     int minpin, maxpin;
     if (_isOutput && _isInput) {
@@ -278,11 +278,7 @@ bool I2S::begin() {
     }
     if (_isOutput) {
         if (_isInput) {
-            if (_isTDM) {
-                pio_tdm_inout_program_init(_pio, _sm, off, _pinDIN, _pinDOUT, _pinBCLK, _bps, _swapClocks, _tdmChannels);
-            } else {
             pio_i2s_inout_program_init(_pio, _sm, off, _pinDIN, _pinDOUT, _pinBCLK, _bps, _swapClocks);
-            }
         } else if (_isTDM) {
             pio_tdm_out_program_init(_pio, _sm, off, _pinDOUT, _pinBCLK, _bps, _swapClocks, _tdmChannels);
         } else if (_isLSBJ) {

libraries/I2S/src/pio_i2s.pio

@@ -104,41 +104,6 @@ lastbit:
     ; Loop back to the beginning
 
 
-.program pio_tdm_inout
-.side_set 2   ; 0 = bclk, 1 = wclk
-; The C code should place (number of bits * channels - 1) in Y and update SHIFTCTRL
-; to be 32 (as per the TDM specs)
-;                           +----- WCLK
-;                           |+---- BCLK
-    mov x, y         side 0b01 [1]
-bitloop:
-    out pins, 1      side 0b00      ; Output changes on falling edge
-    in pins, 1       side 0b00      ; Sample input on falling edge
-    jmp x-- bitloop  side 0b11 [1]  ; Last bit toggles WCLK to mark frame boundary
-
-lastbit:
-    in pins, 1       side 0b10
-    out pins, 1      side 0b10
-    ; Loop back to the beginning
-
-
-.program pio_tdm_inout_swap
-.side_set 2   ; 0 = bclk, 1 = wclk
-; The C code should place (number of bits * channels - 1) in Y and update SHIFTCTRL
-; to be 32 (as per the TDM specs)
-;                           +----- WCLK
-;                           |+---- BCLK
-    mov x, y         side 0b10 [1]
-bitloop:
-    out pins, 1      side 0b00      ; Output changes on falling edge
-    in pins, 1       side 0b00      ; Sample input on falling edge
-    jmp x-- bitloop  side 0b11 [1]  ; Last bit toggles WCLK to mark frame boundary
-
-lastbit:
-    in pins, 1       side 0b01
-    out pins, 1      side 0b01
-    ; Loop back to the beginning
-
 
 .program pio_lsbj_out
 .side_set 2   ; 0 = bclk, 1=wclk
@@ -348,42 +313,6 @@ static inline void pio_tdm_out_program_init(PIO pio, uint sm, uint offset, uint
     pio_sm_exec(pio, sm, pio_encode_out(pio_osr, 32));
 }
 
-static inline void pio_tdm_inout_program_init(PIO pio, uint sm, uint offset, uint data_in_pin, uint data_out_pin, uint clock_pin_base, uint bits, bool swap, uint channels) {
-    pio_gpio_init(pio, data_in_pin);
-    pio_gpio_init(pio, data_out_pin);
-    pio_gpio_init(pio, clock_pin_base);
-    pio_gpio_init(pio, clock_pin_base + 1);
-
-    pio_sm_config c = swap ? pio_tdm_inout_swap_program_get_default_config(offset) : pio_tdm_inout_program_get_default_config(offset);
-
-    sm_config_set_in_pins(&c, data_in_pin);
-    sm_config_set_out_pins(&c, data_out_pin, 1);
-    sm_config_set_sideset_pins(&c, clock_pin_base);
-    sm_config_set_in_shift(&c, false, true, 32);
-    sm_config_set_out_shift(&c, false, true, 32);
-    sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_NONE);
-
-    pio_sm_init(pio, sm, offset, &c);
-
-    pio_sm_set_consecutive_pindirs(pio, sm, data_in_pin, 1, false);
-    pio_sm_set_consecutive_pindirs(pio, sm, data_out_pin, 1, true);
-    pio_sm_set_consecutive_pindirs(pio, sm, clock_pin_base, 2, true);
-    pio_sm_set_set_pins(pio, sm, data_out_pin, 1);
-    pio_sm_set_set_pins(pio, sm, clock_pin_base, 2);
-
-    // Initialize PIO state for TDM
-    // Can't set constant > 31, so push and pop/mov if needed
-    if (bits * channels - 1 > 31) {
-        pio_sm_put_blocking(pio, sm, bits * channels - 2);
-        pio_sm_exec(pio, sm, pio_encode_pull(false, false));
-        pio_sm_exec(pio, sm, pio_encode_mov(pio_y, pio_osr));
-    } else {
-        pio_sm_exec(pio, sm, pio_encode_set(pio_y, bits * channels - 2));
-    }
-
-    // Need to make OSR believe there's nothing left to shift out
-    pio_sm_exec(pio, sm, pio_encode_out(pio_osr, 32));
-}
 
 static inline void pio_lsbj_out_program_init(PIO pio, uint sm, uint offset, uint data_pin, uint clock_pin_base, uint bits, bool swap) {
     pio_gpio_init(pio, data_pin);

libraries/I2S/src/pio_i2s.pio.h

@@ -28,7 +28,7 @@ static const struct pio_program pio_i2s_mclk_program = {
     .instructions = pio_i2s_mclk_program_instructions,
     .length = 2,
     .origin = -1,
-    .pio_version = pio_i2s_mclk_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -67,7 +67,7 @@ static const struct pio_program pio_i2s_out_program = {
     .instructions = pio_i2s_out_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_i2s_out_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -107,7 +107,7 @@ static const struct pio_program pio_i2s_out_swap_program = {
     .instructions = pio_i2s_out_swap_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_i2s_out_swap_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -143,7 +143,7 @@ static const struct pio_program pio_tdm_out_program = {
     .instructions = pio_tdm_out_program_instructions,
     .length = 4,
     .origin = -1,
-    .pio_version = pio_tdm_out_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -179,7 +179,7 @@ static const struct pio_program pio_tdm_out_swap_program = {
     .instructions = pio_tdm_out_swap_program_instructions,
     .length = 4,
     .origin = -1,
-    .pio_version = pio_tdm_out_swap_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -193,82 +193,6 @@ static inline pio_sm_config pio_tdm_out_swap_program_get_default_config(uint off
 }
 #endif
 
-// ------------- //
-// pio_tdm_inout //
-// ------------- //
-
-#define pio_tdm_inout_wrap_target 0
-#define pio_tdm_inout_wrap 5
-#define pio_tdm_inout_pio_version 0
-
-static const uint16_t pio_tdm_inout_program_instructions[] = {
-    //     .wrap_target
-    0xa922, //  0: mov    x, y            side 1 [1]
-    0x6001, //  1: out    pins, 1         side 0
-    0x4001, //  2: in     pins, 1         side 0
-    0x1941, //  3: jmp    x--, 1          side 3 [1]
-    0x5001, //  4: in     pins, 1         side 2
-    0x7001, //  5: out    pins, 1         side 2
-    //     .wrap
-};
-
-#if !PICO_NO_HARDWARE
-static const struct pio_program pio_tdm_inout_program = {
-    .instructions = pio_tdm_inout_program_instructions,
-    .length = 6,
-    .origin = -1,
-    .pio_version = pio_tdm_inout_pio_version,
-#if PICO_PIO_VERSION > 0
-    .used_gpio_ranges = 0x0
-#endif
-};
-
-static inline pio_sm_config pio_tdm_inout_program_get_default_config(uint offset) {
-    pio_sm_config c = pio_get_default_sm_config();
-    sm_config_set_wrap(&c, offset + pio_tdm_inout_wrap_target, offset + pio_tdm_inout_wrap);
-    sm_config_set_sideset(&c, 2, false, false);
-    return c;
-}
-#endif
-
-// ------------------ //
-// pio_tdm_inout_swap //
-// ------------------ //
-
-#define pio_tdm_inout_swap_wrap_target 0
-#define pio_tdm_inout_swap_wrap 5
-#define pio_tdm_inout_swap_pio_version 0
-
-static const uint16_t pio_tdm_inout_swap_program_instructions[] = {
-    //     .wrap_target
-    0xb122, //  0: mov    x, y            side 2 [1]
-    0x6001, //  1: out    pins, 1         side 0
-    0x4001, //  2: in     pins, 1         side 0
-    0x1941, //  3: jmp    x--, 1          side 3 [1]
-    0x4801, //  4: in     pins, 1         side 1
-    0x6801, //  5: out    pins, 1         side 1
-    //     .wrap
-};
-
-#if !PICO_NO_HARDWARE
-static const struct pio_program pio_tdm_inout_swap_program = {
-    .instructions = pio_tdm_inout_swap_program_instructions,
-    .length = 6,
-    .origin = -1,
-    .pio_version = pio_tdm_inout_swap_pio_version,
-#if PICO_PIO_VERSION > 0
-    .used_gpio_ranges = 0x0
-#endif
-};
-
-static inline pio_sm_config pio_tdm_inout_swap_program_get_default_config(uint offset) {
-    pio_sm_config c = pio_get_default_sm_config();
-    sm_config_set_wrap(&c, offset + pio_tdm_inout_swap_wrap_target, offset + pio_tdm_inout_swap_wrap);
-    sm_config_set_sideset(&c, 2, false, false);
-    return c;
-}
-#endif
-
 // ------------ //
 // pio_lsbj_out //
 // ------------ //
@@ -295,7 +219,7 @@ static const struct pio_program pio_lsbj_out_program = {
     .instructions = pio_lsbj_out_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_lsbj_out_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -335,7 +259,7 @@ static const struct pio_program pio_lsbj_out_swap_program = {
     .instructions = pio_lsbj_out_swap_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_lsbj_out_swap_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -375,7 +299,7 @@ static const struct pio_program pio_i2s_in_program = {
     .instructions = pio_i2s_in_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_i2s_in_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -415,7 +339,7 @@ static const struct pio_program pio_i2s_in_swap_program = {
     .instructions = pio_i2s_in_swap_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = pio_i2s_in_swap_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -459,7 +383,7 @@ static const struct pio_program pio_i2s_inout_program = {
     .instructions = pio_i2s_inout_program_instructions,
     .length = 12,
     .origin = -1,
-    .pio_version = pio_i2s_inout_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -503,7 +427,7 @@ static const struct pio_program pio_i2s_inout_swap_program = {
     .instructions = pio_i2s_inout_swap_program_instructions,
     .length = 12,
     .origin = -1,
-    .pio_version = pio_i2s_inout_swap_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -566,36 +490,6 @@ static inline void pio_tdm_out_program_init(PIO pio, uint sm, uint offset, uint
     // Need to make OSR believe there's nothing left to shift out, or the 1st word will be the count we just passed in, not a sample
     pio_sm_exec(pio, sm, pio_encode_out(pio_osr, 32));
 }
-static inline void pio_tdm_inout_program_init(PIO pio, uint sm, uint offset, uint data_in_pin, uint data_out_pin, uint clock_pin_base, uint bits, bool swap, uint channels) {
-    pio_gpio_init(pio, data_in_pin);
-    pio_gpio_init(pio, data_out_pin);
-    pio_gpio_init(pio, clock_pin_base);
-    pio_gpio_init(pio, clock_pin_base + 1);
-    pio_sm_config c = swap ? pio_tdm_inout_swap_program_get_default_config(offset) : pio_tdm_inout_program_get_default_config(offset);
-    sm_config_set_in_pins(&c, data_in_pin);
-    sm_config_set_out_pins(&c, data_out_pin, 1);
-    sm_config_set_sideset_pins(&c, clock_pin_base);
-    sm_config_set_in_shift(&c, false, true, 32);
-    sm_config_set_out_shift(&c, false, true, 32);
-    sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_NONE);
-    pio_sm_init(pio, sm, offset, &c);
-    pio_sm_set_consecutive_pindirs(pio, sm, data_in_pin, 1, false);
-    pio_sm_set_consecutive_pindirs(pio, sm, data_out_pin, 1, true);
-    pio_sm_set_consecutive_pindirs(pio, sm, clock_pin_base, 2, true);
-    pio_sm_set_set_pins(pio, sm, data_out_pin, 1);
-    pio_sm_set_set_pins(pio, sm, clock_pin_base, 2);
-    // Initialize PIO state for TDM
-    // Can't set constant > 31, so push and pop/mov if needed
-    if (bits * channels - 1 > 31) {
-        pio_sm_put_blocking(pio, sm, bits * channels - 2);
-        pio_sm_exec(pio, sm, pio_encode_pull(false, false));
-        pio_sm_exec(pio, sm, pio_encode_mov(pio_y, pio_osr));
-    } else {
-        pio_sm_exec(pio, sm, pio_encode_set(pio_y, bits * channels - 2));
-    }
-    // Need to make OSR believe there's nothing left to shift out
-    pio_sm_exec(pio, sm, pio_encode_out(pio_osr, 32));
-}
 static inline void pio_lsbj_out_program_init(PIO pio, uint sm, uint offset, uint data_pin, uint clock_pin_base, uint bits, bool swap) {
     pio_gpio_init(pio, data_pin);
     pio_gpio_init(pio, clock_pin_base);
@@ -661,4 +555,3 @@ static inline void pio_i2s_inout_program_init(PIO pio, uint sm, uint offset, uin
 }
 
 #endif
-

libraries/LittleFS/lib/littlefs

@@ -1 +1 @@
-Subproject commit 8ed63b27be79ab59ee1cd15a950ddd64e7a602f7
+Subproject commit 0494ce7169f06a734a7bd7585f49a9fa91fa7318

libraries/PDM/src/rp2040/pdm.pio

@@ -31,7 +31,7 @@ static inline void pdm_pio_program_init(PIO pio, uint sm, uint offset, uint clkP
   pio_sm_set_consecutive_pindirs(pio, sm, dataPin, 1, false);
   pio_sm_set_consecutive_pindirs(pio, sm, clkPin, 1, true);
   pio_sm_set_pins_with_mask(pio, sm, 0, (1u << clkPin) );
-  pio_gpio_init(pio, dataPin);
+  //pio_gpio_init(pio, dataPin);
   pio_gpio_init(pio, clkPin);
 
   pio_sm_init(pio, sm, offset, &c);

libraries/PDM/src/rp2040/pdm.pio.h

@@ -28,7 +28,7 @@ static const struct pio_program pdm_pio_program = {
     .instructions = pdm_pio_program_instructions,
     .length = 2,
     .origin = -1,
-    .pio_version = pdm_pio_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif

libraries/PWMAudio/src/PWMAudioPrecalc.h

@@ -18,8 +18,8 @@ static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 16000, 1}, {11025, 116
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 16625, 1}, {11025, 24127, 2}, {16000, 16625, 2}, {22050, 24127, 4}, {32000, 16625, 4}, {44100, 24127, 8}, {48000, 16625, 6}, {88200, 24127, 16}, {96000, 16625, 12}, {176400, 47500, 63}, {192000, 16625, 24}};
 #elif F_CPU == 150000000
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 18750, 1}, {11025, 27211, 2}, {16000, 9375, 1}, {22050, 47619, 7}, {32000, 9375, 2}, {44100, 37415, 11}, {48000, 3125, 1}, {88200, 42517, 25}, {96000, 3125, 2}, {176400, 42517, 50}, {192000, 3125, 4}};
-#elif F_CPU == 176000000
-static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 22000, 1}, {11025, 63855, 4}, {16000, 11000, 1}, {22050, 55873, 7}, {32000, 5500, 1}, {44100, 55873, 14}, {48000, 11000, 3}, {88200, 55873, 28}, {96000, 5500, 3}, {176400, 55873, 56}, {192000, 2750, 3}};
+#elif F_CPU == 175000000
+static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 21875, 1}, {11025, 15873, 1}, {16000, 21875, 2}, {22050, 15873, 2}, {32000, 21875, 4}, {44100, 15873, 4}, {48000, 21875, 6}, {88200, 15873, 8}, {96000, 21875, 12}, {176400, 62500, 63}, {192000, 21875, 24}};
 #elif F_CPU == 200000000
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 25000, 1}, {11025, 54422, 3}, {16000, 12500, 1}, {22050, 63492, 7}, {32000, 6250, 1}, {44100, 31746, 7}, {48000, 12500, 3}, {88200, 15873, 7}, {96000, 6250, 3}, {176400, 53288, 47}, {192000, 3125, 3}};
 #elif F_CPU == 225000000
@@ -28,8 +28,8 @@ static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 28125, 1}, {11025, 204
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 30000, 1}, {11025, 65306, 3}, {16000, 15000, 1}, {22050, 32653, 3}, {32000, 7500, 1}, {44100, 59864, 11}, {48000, 5000, 1}, {88200, 62585, 23}, {96000, 2500, 1}, {176400, 62585, 46}, {192000, 1250, 1}};
 #elif F_CPU == 250000000
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 31250, 1}, {11025, 45351, 2}, {16000, 15625, 1}, {22050, 56689, 5}, {32000, 15625, 2}, {44100, 62358, 11}, {48000, 15625, 3}, {88200, 42517, 15}, {96000, 15625, 6}, {176400, 42517, 30}, {192000, 15625, 12}};
-#elif F_CPU == 276000000
-static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 34500, 1}, {11025, 25034, 1}, {16000, 17250, 1}, {22050, 12517, 1}, {32000, 8625, 1}, {44100, 12517, 2}, {48000, 5750, 1}, {88200, 12517, 4}, {96000, 2875, 1}, {176400, 12517, 8}, {192000, 2875, 2}};
+#elif F_CPU == 275000000
+static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 34375, 1}, {11025, 49887, 2}, {16000, 34375, 2}, {22050, 37415, 3}, {32000, 34375, 4}, {44100, 37415, 6}, {48000, 34375, 6}, {88200, 37415, 12}, {96000, 34375, 12}, {176400, 35856, 23}, {192000, 34375, 24}};
 #elif F_CPU == 300000000
 static const PWMPacerPrecalc __PWMAudio_pacer[] = {{8000, 37500, 1}, {11025, 27211, 1}, {16000, 18750, 1}, {22050, 27211, 2}, {32000, 9375, 1}, {44100, 47619, 7}, {48000, 6250, 1}, {88200, 37415, 11}, {96000, 3125, 1}, {176400, 42517, 25}, {192000, 3125, 2}};
 #else

libraries/SPI/src/SPI.cpp

@@ -263,8 +263,8 @@ void SPIClassRP2040::abortAsync() {
 
 
 bool SPIClassRP2040::setRX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
-    constexpr uint64_t valid[2] = { __bitset({0, 4, 16, 20, 32, 36}) /* SPI0 */,
+#ifdef PICO_RP2350B
+    constexpr uint64_t valid[2] = { __bitset({0, 4, 16, 20, 32, 26}) /* SPI0 */,
                                     __bitset({8, 12, 24, 28, 40, 44})  /* SPI1 */
                                   };
 #else
@@ -290,7 +290,7 @@ bool SPIClassRP2040::setRX(pin_size_t pin) {
 }
 
 bool SPIClassRP2040::setCS(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({1, 5, 17, 21, 33, 37}) /* SPI0 */,
                                     __bitset({9, 13, 25, 29, 41, 45})  /* SPI1 */
                                   };
@@ -317,7 +317,7 @@ bool SPIClassRP2040::setCS(pin_size_t pin) {
 }
 
 bool SPIClassRP2040::setSCK(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({2, 6, 18, 22, 34, 38}) /* SPI0 */,
                                     __bitset({10, 14, 26, 30, 42, 46})  /* SPI1 */
                                   };
@@ -344,7 +344,7 @@ bool SPIClassRP2040::setSCK(pin_size_t pin) {
 }
 
 bool SPIClassRP2040::setTX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({3, 7, 19, 23, 35, 39}) /* SPI0 */,
                                     __bitset({11, 15, 27, 31, 43, 47})  /* SPI1 */
                                   };

libraries/SPI/src/SPI.h

@@ -25,219 +25,65 @@
 #include <hardware/spi.h>
 #include "SPIHelper.h"
 
-/**
-    @brief Implements a hardware-based SPI interface using the Pico's SPI blocks
-*/
 class SPIClassRP2040 : public arduino::HardwareSPI {
 public:
-    /**
-            @brief Create a PIO-based SPI instance, pins can be changed before begin() call
-
-            @param [in] spi SPI hardware instance (spi0/spi1)
-            @param [in] rx MISO GPIO
-            @param [in] cs CS GPIO
-            @param [in] sck SCK GPIO
-            @param [in] tx MOSI GPIO
-    */
     SPIClassRP2040(spi_inst_t *spi, pin_size_t rx, pin_size_t cs, pin_size_t sck, pin_size_t tx);
 
-    /**
-           @brief Send an 8-bit byte of data and return read-back 8-bit value
-
-           @param [in] data Data to send
-           @returns Read back byte from SPI interface
-    */
+    // Send or receive 8- or 16-bit data.  Returns read back value
     byte transfer(uint8_t data) override;
-
-    /**
-        @brief Send a 16-bit quantity over SPI and return read-back 16-bit value under a single CS assertion
-
-        @param [in] data Data to send
-        @returns Read back 16-bit quantity
-    */
     uint16_t transfer16(uint16_t data) override;
 
-
-    /**
-        @brief Sends buffer in 8 bit chunks under a single CS. Overwrites buffer with read data
-
-        @param [in, out] buf Buffer to read and write back into
-        @param [in] count Number of bytes to transmit/read
-    */
+    // Sends buffer in 8 bit chunks.  Overwrites buffer with read data
     void transfer(void *buf, size_t count) override;
 
-    /**
-            @brief Sends one buffer and receives into another under a single CS. Can set rx or txbuf to nullptr
-
-            @param [in] txbuf Buffer to transmit or nullptr to send 0s
-            @param [out] rxbuf Buffer to read back into or nullptr to ignore returned data
-            @param [in] count Numbner of bytes to transmit/receive
-    */
+    // Sends one buffer and receives into another, much faster! can set rx or txbuf to nullptr
     void transfer(const void *txbuf, void *rxbuf, size_t count) override;
 
     // DMA/asynchronous transfers.  Do not combime with synchronous runs or bad stuff will happen
     // All buffers must be valid for entire DMA and not touched until `finished()` returns true.
-    /**
-        @brief Perform a transfer() using DMA in the background. Returns immediately, need to check for completion
-
-        @details
-        Do not combine asynchronous and synchronous transfers.  All buffers must be valid until
-        the transfer reports that it is completed (``finished`` returns true).
-
-        @param [in] send Buffer to transmit, must remain valid through entire operation
-        @param [out] recv Buffer to receive, must remain valid through entire operation
-        @param [in] bytes Number of bytes to transfer under single CS
-    */
     bool transferAsync(const void *send, void *recv, size_t bytes);
-    /**
-        @brief Call to check if the async operations is completed and the buffer can be reused/read
-
-        @returns True if the asynchronous SPI operation has completed and ``recv`` buffer is valid
-    */
-    bool finishedAsync();
-
-    /**
-        @brief Aborts an ongoing asynchronous SPI operation, if one is still operating
-
-        @details
-        Not normally needed, but in the case where a large, long SPI operation needs to be aborted
-        this call allows an application to safely stop the SPI and dispose of the ``recv`` and
-        ``send`` buffers
-    */
-    void abortAsync();
+    bool finishedAsync(); // Call to check if the async operations is completed and the buffer can be reused/read
+    void abortAsync(); // Cancel an outstanding async operation
 
 
-    /**
-           @brief Begin an SPI transaction, sets SPI speed and masks necessary interrupts
-
-           @param [in] SPISettings SPI configuration parameters, including the clock speed
-    */
+    // Call before/after every complete transaction
     void beginTransaction(SPISettings settings) override;
-
-    /**
-            @brief Ends an SPI transaction, unmasks and masked GPIO interrupts
-    */
     void endTransaction(void) override;
 
-    /**
-           @brief Sets the MISO(RX) pin. Call before begin()
-
-           @param [in] pin The GPIO number to assign to
-           @returns True on success
-    */
+    // Assign pins, call before begin()
     bool setRX(pin_size_t pin);
-
-    /**
-            @brief Sets the MISO(RX) pin. Call before begin()
-
-            @param [in] pin The GPIO number to assign to
-            @returns True on success
-    */
     inline bool setMISO(pin_size_t pin) {
         return setRX(pin);
     }
-
-    /**
-            @brief Sets the CS pin. Call before begin()
-
-            @param [in] pin The GPIO number to assign to
-            @returns True on success
-    */
     bool setCS(pin_size_t pin);
-
-    /**
-            @brief Sets the SCK pin. Call before begin()
-
-            @param [in] pin The GPIO number to assign to
-            @returns True on success
-    */
     bool setSCK(pin_size_t pin);
-
-    /**
-          @brief Sets the MOSI(TX) pin. Call before begin()
-
-          @param [in] pin The GPIO number to assign to
-          @returns True on success
-    */
     bool setTX(pin_size_t pin);
-
-    /**
-          @brief Sets the MOSI(TX) pin. Call before begin()
-
-          @param [in] pin The GPIO number to assign to
-          @returns True on success
-    */
     inline bool setMOSI(pin_size_t pin) {
         return setTX(pin);
     }
 
-    /**
-            @brief Call once to init/deinit SPI class, select pins, etc.
-    */
+    // Call once to init/deinit SPI class, select pins, etc.
     virtual void begin() override {
         begin(false);
     }
-
-    /**
-           @brief Call once to init/deinit SPI class, select pins, etc.
-
-           @param [in] hwCS Pass in true to enable HW-controlled CS.  Otherwise application needs to assert/deassert CS.
-    */
     void begin(bool hwCS);
-
-    /**
-           @brief Call to deinit and disable the SPI interface.
-    */
     void end() override;
 
-    /**
-            @brief Deprecated, do not use
-
-            @param [in] order Deprecated
-    */
+    // Deprecated - do not use!
     void setBitOrder(BitOrder order) __attribute__((deprecated));
-
-    /**
-            @brief Deprecated, do not use
-
-            @param [in] order Deprecated
-    */
     void setDataMode(uint8_t uc_mode) __attribute__((deprecated));
-
-    /**
-            @brief Deprecated, do not use
-
-            @param [in] order Deprecated
-    */
     void setClockDivider(uint8_t uc_div) __attribute__((deprecated));
 
-    /**
-            @brief Ensure specific GPIO interrupt is disabled during and SPI transaction to protect against re-entrancy.  Multiple GPIOs supported by multiple calls.
-
-            @param [in] interruptNumber GPIO pin to mask
-    */
+    // List of GPIO IRQs to disable during a transaction
     virtual void usingInterrupt(int interruptNumber) override {
         _helper.usingInterrupt(interruptNumber);
     }
 
-    /**
-            @brief Remove a GPIO from the masked-during-transaction list.
-
-            @param [in] interruptNumber GPIO pin to unmask
-    */
     virtual void notUsingInterrupt(int interruptNumber) override {
         _helper.notUsingInterrupt(interruptNumber);
     }
-
-    /**
-           @brief Deprecated, do not use
-    */
-    virtual void attachInterrupt() override  __attribute__((deprecated)) { /* noop */ }
-
-    /**
-           @brief Deprecated, do not use
-    */
-    virtual void detachInterrupt() override  __attribute__((deprecated)) { /* noop */ }
+    virtual void attachInterrupt() override { /* noop */ }
+    virtual void detachInterrupt() override { /* noop */ }
 
 private:
     void adjustBuffer(const void *s, void *d, size_t cnt, bool by16);

libraries/SPI/src/SPIHelper.h

@@ -98,7 +98,7 @@ public:
         return (reverseByte(w & 0xff) << 8) | (reverseByte(w >> 8));
     }
 
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     static constexpr int GPIOIRQREGS = 6;
 #else
     static constexpr int GPIOIRQREGS = 4;
@@ -108,9 +108,6 @@ public:
         @brief Disables any GPIO interrupts registered before an SPI transaction begins
     */
     void maskInterrupts() {
-        if (_usingIRQs.empty()) {
-            return;
-        }
         noInterrupts(); // Avoid possible race conditions if IRQ comes in while main app is in middle of this
         // Disable any IRQs that are being used for SPI
         io_bank0_irq_ctrl_hw_t *irq_ctrl_base = get_core_num() ? &iobank0_hw->proc1_irq_ctrl : &iobank0_hw->proc0_irq_ctrl;
@@ -137,9 +134,6 @@ public:
         @brief Restores GPIO interrupts masks after an SPI transaction completes
     */
     void unmaskInterrupts() {
-        if (_usingIRQs.empty()) {
-            return;
-        }
         noInterrupts(); // Avoid race condition so the GPIO IRQs won't come back until all state is restored
         DEBUGSPI("SPI::endTransaction()\n");
         // Re-enable IRQs

libraries/SPISlave/src/SPISlave.cpp

@@ -79,7 +79,7 @@ inline spi_cpha_t SPISlaveClass::cpha(SPISettings _spis) {
 }
 
 bool SPISlaveClass::setRX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({0, 4, 16, 20, 32, 26}) /* SPI0 */,
                                     __bitset({8, 12, 24, 28, 40, 44})  /* SPI1 */
                                   };
@@ -106,7 +106,7 @@ bool SPISlaveClass::setRX(pin_size_t pin) {
 }
 
 bool SPISlaveClass::setCS(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({1, 5, 17, 21, 33, 37}) /* SPI0 */,
                                     __bitset({9, 13, 25, 29, 41, 45})  /* SPI1 */
                                   };
@@ -133,7 +133,7 @@ bool SPISlaveClass::setCS(pin_size_t pin) {
 }
 
 bool SPISlaveClass::setSCK(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({2, 6, 18, 22, 34, 38}) /* SPI0 */,
                                     __bitset({10, 14, 26, 30, 42, 46})  /* SPI1 */
                                   };
@@ -160,7 +160,7 @@ bool SPISlaveClass::setSCK(pin_size_t pin) {
 }
 
 bool SPISlaveClass::setTX(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({3, 7, 19, 23, 35, 39}) /* SPI0 */,
                                     __bitset({11, 15, 27, 31, 43, 47})  /* SPI1 */
                                   };

libraries/Servo/src/servo.pio.h

@@ -36,7 +36,7 @@ static const struct pio_program servo_program = {
     .instructions = servo_program_instructions,
     .length = 8,
     .origin = -1,
-    .pio_version = servo_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif

libraries/SoftwareSPI/src/SoftwareSPI.h

@@ -25,9 +25,6 @@
 #include <api/HardwareSPI.h>
 #include <hardware/spi.h>
 
-/**
-    @brief Implements a PIO-based SPI interface without pin restrictions
-*/
 class SoftwareSPI : public arduino::HardwareSPI {
 public:
     /**
@@ -40,170 +37,53 @@ public:
     */
     SoftwareSPI(pin_size_t sck, pin_size_t miso, pin_size_t mosi, pin_size_t cs = -1);
 
-    /**
-        @brief Send an 8-bit byte of data and return read-back 8-bit value
-
-        @param [in] data Data to send
-        @returns Read back byte from SPI interface
-    */
+    // Send or receive 8- or 16-bit data.  Returns read back value
     byte transfer(uint8_t data) override;
-
-    /**
-        @brief Send a 16-bit quantity over SPI and return read-back 16-bit value under a single CS assertion
-
-        @param [in] data Data to send
-        @returns Read back 16-bit quantity
-    */
     uint16_t transfer16(uint16_t data) override;
 
-    /**
-        @brief Sends buffer in 8 bit chunks under a single CS. Overwrites buffer with read data
-
-        @param [in, out] buf Buffer to read and write back into
-        @param [in] count Number of bytes to transmit/read
-    */
+    // Sends buffer in 8 bit chunks.  Overwrites buffer with read data
     void transfer(void *buf, size_t count) override;
 
-    /**
-        @brief Sends one buffer and receives into another under a single CS. Can set rx or txbuf to nullptr
-
-        @param [in] txbuf Buffer to transmit or nullptr to send 0s
-        @param [out] rxbuf Buffer to read back into or nullptr to ignore returned data
-        @param [in] count Numbner of bytes to transmit/receive
-    */
+    // Sends one buffer and receives into another, much faster! can set rx or txbuf to nullptr
     void transfer(const void *txbuf, void *rxbuf, size_t count) override;
 
-    /**
-        @brief Begin an SPI transaction, sets SPI speed and masks necessary interrupts
-
-        @param [in] SPISettings SPI configuration parameters, including the clock speed
-    */
+    // Call before/after every complete transaction
     void beginTransaction(SPISettings settings) override;
-
-    /**
-        @brief Ends an SPI transaction, unmasks and masked GPIO interrupts
-    */
     void endTransaction(void) override;
 
-    /**
-        @brief Sets the MISO(RX) pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
+    // Assign pins, call before begin()
     bool setMISO(pin_size_t pin);
-
-    /**
-        @brief Sets the MISO(RX) pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
     inline bool setRX(pin_size_t pin) {
         return setMISO(pin);
     }
-
-    /**
-        @brief Sets the CS pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
     bool setCS(pin_size_t pin);
-
-    /**
-        @brief Sets the SCK pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
     bool setSCK(pin_size_t pin);
-
-    /**
-        @brief Sets the MOSI(TX) pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
     bool setMOSI(pin_size_t pin);
-
-    /**
-        @brief Sets the MOSI(TX) pin. Call before begin()
-
-        @param [in] pin The GPIO number to assign to
-        @returns True on success
-    */
     inline bool setTX(pin_size_t pin) {
         return setMOSI(pin);
     }
 
-    /**
-        @brief Call once to init/deinit SPI class, select pins, etc.
-    */
+    // Call once to init/deinit SPI class, select pins, etc.
     virtual void begin() override {
         begin(false);
     }
-
-    /**
-        @brief Call once to init/deinit SPI class, select pins, etc.
-
-        @param [in] hwCS Pass in true to enable HW-controlled CS.  Otherwise application needs to assert/deassert CS.
-    */
     void begin(bool hwCS);
-
-    /**
-        @brief Call to deinit and disable the SPI interface.
-    */
     void end() override;
 
-    /**
-        @brief Deprecated, do not use
-
-        @param [in] order Deprecated
-    */
+    // Deprecated - do not use!
     void setBitOrder(BitOrder order) __attribute__((deprecated));
-
-    /**
-        @brief Deprecated, do not use
-
-        @param [in] uc_mode Deprecated
-    */
     void setDataMode(uint8_t uc_mode) __attribute__((deprecated));
-
-    /**
-        @brief Deprecated, do not use
-
-        @param [in] uc_div Deprecated
-    */
     void setClockDivider(uint8_t uc_div) __attribute__((deprecated));
 
-    /**
-        @brief Ensure specific GPIO interrupt is disabled during and SPI transaction to protect against re-entrancy.  Multiple GPIOs supported by multiple calls.
-
-        @param [in] interruptNumber GPIO pin to mask
-    */
+    // List of GPIO IRQs to disable during a transaction
     virtual void usingInterrupt(int interruptNumber) override {
         _helper.usingInterrupt(interruptNumber);
     }
-
-    /**
-        @brief Remove a GPIO from the masked-during-transaction list.
-
-        @param [in] interruptNumber GPIO pin to unmask
-    */
     virtual void notUsingInterrupt(int interruptNumber) override {
         _helper.notUsingInterrupt(interruptNumber);
     }
-
-    /**
-        @brief Deprecated, do not use
-    */
-    virtual void attachInterrupt() override __attribute__((deprecated)) { /* noop */ }
-
-    /**
-        @brief Deprecated, do not use
-    */
-    virtual void detachInterrupt() override __attribute__((deprecated)) { /* noop */ }
+    virtual void attachInterrupt() override { /* noop */ }
+    virtual void detachInterrupt() override { /* noop */ }
 
 private:
     void _adjustPIO(int bits);

libraries/SoftwareSPI/src/spi.pio.h

@@ -28,7 +28,7 @@ static const struct pio_program spi_cpha0_program = {
     .instructions = spi_cpha0_program_instructions,
     .length = 2,
     .origin = -1,
-    .pio_version = spi_cpha0_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -63,7 +63,7 @@ static const struct pio_program spi_cpha1_program = {
     .instructions = spi_cpha1_program_instructions,
     .length = 3,
     .origin = -1,
-    .pio_version = spi_cpha1_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -133,7 +133,7 @@ static const struct pio_program spi_cpha0_cs_program = {
     .instructions = spi_cpha0_cs_program_instructions,
     .length = 9,
     .origin = -1,
-    .pio_version = spi_cpha0_cs_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif
@@ -176,7 +176,7 @@ static const struct pio_program spi_cpha1_cs_program = {
     .instructions = spi_cpha1_cs_program_instructions,
     .length = 9,
     .origin = -1,
-    .pio_version = spi_cpha1_cs_pio_version,
+    .pio_version = 0,
 #if PICO_PIO_VERSION > 0
     .used_gpio_ranges = 0x0
 #endif

libraries/WebServer/examples/AdvancedWebServer/AdvancedWebServer.ino

@@ -35,8 +35,8 @@
 #if USE_WIFI
 #include <WiFi.h>
 #elif USE_WIRED
-#include <W5500lwIP.h> // or W6100lwIP.h or W5100lwIP.h or ENC28J60lwIP.h
-Wiznet5500lwIP eth(1 /* SPI chip select */); // or Wiznet6100lwIP or Wiznet5100lwIP or ENC28J60lwIP
+#include <W5500lwIP.h> // Or W5100lwIP.h or ENC28J60lwIP.h
+Wiznet5500lwIP eth(1 /* chip select */); // or Wiznet5100lwIP or ENC28J60lwIP
 #endif
 
 #include <WiFiClient.h>

libraries/WiFi/examples/BearSSL_Validation/certs.h

@@ -6,53 +6,42 @@
 const char* ssl_host = "www.akamai.com";
 const uint16_t ssl_port = 443;
 
-// openssl s_client -connect www.akamai.com:443  < /dev/null 2>/dev/null | openssl x509 -fingerprint -noout -in /dev/stdin | cut -f2 -d= | sed 's/^/const char fingerprint_ssl[] = "/' | sed 's/$/";/'
-const char fingerprint_ssl[] = "D6:6C:EF:1A:8A:CE:27:18:D4:0C:83:2C:AE:4D:1B:B9:4C:B8:C9:83";
 
-// openssl s_client -connect www.akamai.com:443 < /dev/null 2>/dev/null | openssl x509 -pubkey -noout
-const char pubkey_ssl[] = R"PUBKEY(
+const char fingerprint_ssl [] PROGMEM = "48:EF:70:29:41:CE:64:C9:DF:57:A2:46:E8:34:E1:50:0B:70:AE:17";
+const char pubkey_ssl [] PROGMEM = R"PUBKEY(
 -----BEGIN PUBLIC KEY-----
-MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAE2BD04+A9idhYCHJ4RBy2KHtvJAsz
-KLkAzZOWDEqjNu4plNmiWMymBw0rJggZOU4/TE+a4KqzBgsus9QkFZh88w==
+MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEiuc+zlu43bv55+s0Fj6RiBW+olZm
+c/AkoTP48CFCIGP1DET7Oufx6oe63GIuBzdVfR5D6R2z818b5gY1o2lBxg==
 -----END PUBLIC KEY-----
 )PUBKEY";
 
-// openssl s_client -connect www.akamai.com:443 < /dev/null 2> /dev/null | openssl x509
-
-const char cert_CA[]  = R"CERT(
+const char cert_CA [] PROGMEM = R"CERT(
 -----BEGIN CERTIFICATE-----
-MIIGAzCCBOugAwIBAgIQA0bb8BLx/7BiUlnlhKlA6TANBgkqhkiG9w0BAQsFADBP
-MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMSkwJwYDVQQDEyBE
-aWdpQ2VydCBUTFMgUlNBIFNIQTI1NiAyMDIwIENBMTAeFw0yNDA5MDMwMDAwMDBa
-Fw0yNTA5MDMyMzU5NTlaMHYxCzAJBgNVBAYTAlVTMRYwFAYDVQQIEw1NYXNzYWNo
-dXNldHRzMRIwEAYDVQQHEwlDYW1icmlkZ2UxIjAgBgNVBAoTGUFrYW1haSBUZWNo
-bm9sb2dpZXMsIEluYy4xFzAVBgNVBAMTDnd3dy5ha2FtYWkuY29tMFkwEwYHKoZI
-zj0CAQYIKoZIzj0DAQcDQgAE2BD04+A9idhYCHJ4RBy2KHtvJAszKLkAzZOWDEqj
-Nu4plNmiWMymBw0rJggZOU4/TE+a4KqzBgsus9QkFZh886OCA30wggN5MB8GA1Ud
-IwQYMBaAFLdrouqoqoSMeeq02g+YssWVdrn0MB0GA1UdDgQWBBR1CWtuGpgU+vEH
-b6yp42l2leyozDAlBgNVHREEHjAcgg53d3cuYWthbWFpLmNvbYIKYWthbWFpLmNv
-bTA+BgNVHSAENzA1MDMGBmeBDAECAjApMCcGCCsGAQUFBwIBFhtodHRwOi8vd3d3
-LmRpZ2ljZXJ0LmNvbS9DUFMwDgYDVR0PAQH/BAQDAgOIMB0GA1UdJQQWMBQGCCsG
-AQUFBwMBBggrBgEFBQcDAjCBjwYDVR0fBIGHMIGEMECgPqA8hjpodHRwOi8vY3Js
-My5kaWdpY2VydC5jb20vRGlnaUNlcnRUTFNSU0FTSEEyNTYyMDIwQ0ExLTQuY3Js
-MECgPqA8hjpodHRwOi8vY3JsNC5kaWdpY2VydC5jb20vRGlnaUNlcnRUTFNSU0FT
-SEEyNTYyMDIwQ0ExLTQuY3JsMH8GCCsGAQUFBwEBBHMwcTAkBggrBgEFBQcwAYYY
-aHR0cDovL29jc3AuZGlnaWNlcnQuY29tMEkGCCsGAQUFBzAChj1odHRwOi8vY2Fj
-ZXJ0cy5kaWdpY2VydC5jb20vRGlnaUNlcnRUTFNSU0FTSEEyNTYyMDIwQ0ExLTEu
-Y3J0MAwGA1UdEwEB/wQCMAAwggF+BgorBgEEAdZ5AgQCBIIBbgSCAWoBaAB2ABLx
-TjS9U3JMhAYZw48/ehP457Vih4icbTAFhOvlhiY6AAABkbhvAhwAAAQDAEcwRQIh
-AKw2mqyB5bKpwGN5Dn4rLL5pjsNY03bEnNpVXltFpOtDAiBmwhRQg/V+whwdynkK
-OOyuChdAd2JH76KE+XISMjPM3gB1AObSMWNAd4zBEEEG13G5zsHSQPaWhIb7uocy
-Hf0eN45QAAABkbhvAm8AAAQDAEYwRAIgOw/ZyiiIsgDbM55pvJmV/CvwA5AGWbpC
-lB9q78TiJj4CIC2d9w9Ntb3HTOrLQvwSiNOrpop+deZ3fa1LQ92miaclAHcAzPsP
-aoVxCWX+lZtTzumyfCLphVwNl422qX5UwP5MDbAAAAGRuG8CMAAABAMASDBGAiEA
-oSSK9/26Uk3fqp7btK2SaEyWM/u++sOZXMeEOefnKwUCIQCqKysJztOF58PueXeE
-pLliBWZUnjUrvPIbtxp31gQQITANBgkqhkiG9w0BAQsFAAOCAQEAAoJryZtJc8oc
-+hf5vflkW2w0PdJ5NpbmjZOMTyutBRaJpxrDqKnjKBEOp6liZ2pDbUngGAwLEM30
-KRBwJCc44u7w8Kj/KOoIZFoh9SiONAEn1qXWF0nFkYAD8J8yYwzkJy7fa3sdodaI
-ex5NJosK/tyXjEBOcTrBsXkzs55pjSi+KJiiOHs/hDuBdyDtJs1ENAOswd8AWMSk
-S9WycNxxEFH9VQgwgUhaI5Lc9J8rt3IJur1wp1JoDwdjIhs1M0rofgdW716UpmQ9
-visdfGu8fCAlDSBPPC6gUPlFGFf4ujUmprJyBQ5xsYva0sVqhGbaoxtV7FdMDJkg
-nDRma+9lPA==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 -----END CERTIFICATE-----
 )CERT";

libraries/Wire/src/Wire.cpp

@@ -19,8 +19,6 @@
     You should have received a copy of the GNU Lesser General Public
     License along with this library; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-    Modified May 2025 by Sven Bruns (Lorandil on GitHub) to support user defined buffer size (inspired by ESP32 code)
 */
 
 #include <Arduino.h>
@@ -48,14 +46,10 @@ TwoWire::TwoWire(i2c_inst_t *i2c, pin_size_t sda, pin_size_t scl) {
     _running = false;
     _txBegun = false;
     _buffLen = 0;
-
-    // allocate buffer memory early, so we don't fragment the heap later
-    _buffSize = WIRE_BUFFER_SIZE;
-    _buff = (uint8_t *)malloc(_buffSize);
 }
 
 bool TwoWire::setSDA(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({0, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44}) /* I2C0 */,
                                     __bitset({2, 6, 10, 14, 18, 22, 26, 30, 34, 38, 42, 46})  /* I2C1 */
                                   };
@@ -82,7 +76,7 @@ bool TwoWire::setSDA(pin_size_t pin) {
 }
 
 bool TwoWire::setSCL(pin_size_t pin) {
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
     constexpr uint64_t valid[2] = { __bitset({1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45}) /* I2C0 */,
                                     __bitset({3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 47})  /* I2C1 */
                                   };
@@ -164,16 +158,6 @@ void TwoWire::begin(uint8_t addr) {
         // ERROR
         return;
     }
-
-    // allocate buffer if necessary
-    if (!_buff) {
-        _buff = (uint8_t *)malloc(_buffSize);
-        if (!_buff) {
-            // ERROR
-            return;
-        }
-    }
-
     _slave = true;
     i2c_init(_i2c, _clkHz);
     i2c_set_slave_mode(_i2c, true, addr);
@@ -208,7 +192,7 @@ void TwoWire::onIRQ() {
     // First, pull off any data available
     if (irqstat & (1 << 2)) {
         // RX_FULL
-        if (_buffLen < int(_buffSize)) {
+        if (_buffLen < (int)sizeof(_buff)) {
             _buff[_buffLen++] = _i2c->hw->data_cmd & 0xff;
         } else {
             _i2c->hw->data_cmd;
@@ -287,7 +271,7 @@ void TwoWire::beginTransmission(uint8_t addr) {
 }
 
 size_t TwoWire::requestFrom(uint8_t address, size_t quantity, bool stopBit) {
-    if (!_running || _txBegun || !quantity || (quantity > _buffSize)) {
+    if (!_running || _txBegun || !quantity || (quantity > sizeof(_buff))) {
         return 0;
     }
 
@@ -464,7 +448,7 @@ size_t TwoWire::write(uint8_t ucData) {
             return 0;
         }
     } else {
-        if (!_txBegun || (_buffLen == int(_buffSize))) {
+        if (!_txBegun || (_buffLen == sizeof(_buff))) {
             return 0;
         }
         _buff[_buffLen++] = ucData;
@@ -761,20 +745,6 @@ void TwoWire::clearTimeoutFlag() {
     _timeoutFlag = false;
 }
 
-size_t TwoWire::setBufferSize(size_t bSize) {
-    if (_running) {
-        // ERROR - transmission already running. Report back current buffer size
-        return _buffSize;
-    }
-    // only free the buffer, if it already exists and the new size differs from the current one
-    if (_buff && (bSize != _buffSize)) {
-        free(_buff);
-        _buff = nullptr;
-    }
-    _buffSize = max(WIRE_BUFFER_SIZE_MIN, int(bSize)); // enforce minimum buffer size
-    return _buffSize;
-}
-
 #ifndef __WIRE0_DEVICE
 #define __WIRE0_DEVICE i2c0
 #endif

libraries/Wire/src/Wire.h

@@ -19,8 +19,6 @@
     You should have received a copy of the GNU Lesser General Public
     License along with this library; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-    Modified May 2025 by Sven Bruns (Lorandil on GitHub) to support user defined buffer size (inspired by ESP32 code)
 */
 
 #pragma once
@@ -32,14 +30,8 @@
 // WIRE_HAS_END means Wire has end()
 #define WIRE_HAS_END 1
 
-// WIRE_HAS_BUFFER_SIZE means Wire has setBufferSize()
-#define WIRE_HAS_BUFFER_SIZE 1
-
 #ifndef WIRE_BUFFER_SIZE
-#define WIRE_BUFFER_SIZE 256    // default size, if none is set using Wire::setBuffersize(size_t)
-#endif
-#ifndef WIRE_BUFFER_SIZE_MIN
-#define WIRE_BUFFER_SIZE_MIN 32 // minimum size for safe operation
+#define WIRE_BUFFER_SIZE 256
 #endif
 
 class TwoWire : public HardwareI2C {
@@ -105,8 +97,6 @@ public:
     bool getTimeoutFlag(void);
     void clearTimeoutFlag(void);
 
-    size_t setBufferSize(size_t bSize);	// set buffer size (call prior to 'begin()')
-
     // IRQ callback
     void onIRQ();
 
@@ -125,9 +115,7 @@ private:
     bool _reset_with_timeout;
     void _handleTimeout(bool reset);
 
-    uint8_t *_buff;         // pointer to i2c buffer
-    size_t  _buffSize;      // current buffer size
-
+    uint8_t _buff[WIRE_BUFFER_SIZE];
     int _buffLen;
     int _buffOff;
 

libraries/lwIP_Ethernet/src/LwipEthernet.cpp

@@ -75,7 +75,7 @@ void __removeEthernetPacketHandler(int id) {
 }
 
 #define GPIOSTACKSIZE 8
-#if defined(PICO_RP2350) && !PICO_RP2350A // RP2350B
+#ifdef PICO_RP2350B
 #define GPIOIRQREGS 6
 #define GPIOIRQREGSINIT 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
 #else

libraries/lwIP_Ethernet/src/LwipIntfDev.h

@@ -186,7 +186,6 @@ protected:
     SPIClass& _spiUnit;
     SPISettings _spiSettings = SPISettings(4000000, MSBFIRST, SPI_MODE0);
     netif _netif;
-    bool _isDHCP = true;
 
     uint16_t _mtu;
     int8_t   _intrPin;
@@ -283,8 +282,6 @@ bool LwipIntfDev<RawDev>::config(const IPAddress& localIP, const IPAddress& gate
         return false;
     }
 
-    _isDHCP = (localIP.v4() == 0);
-
     IPAddress realGateway, realNetmask, realDns1;
     if (!ipAddressReorder(localIP, gateway, netmask, dns1, realGateway, realNetmask, realDns1)) {
         return false;
@@ -392,11 +389,8 @@ bool LwipIntfDev<RawDev>::begin(const uint8_t* macAddress, const uint16_t mtu) {
         _phID = __addEthernetPacketHandler([this] { this->handlePackets(); });
     }
 
-    if (_isDHCP) {
-        // Destroy any existing address
-        ip4_addr_set_u32(ip_2_ip4(&_netif.ip_addr), 0);
-
-        // Start a new DHCP request
+    if (localIP().v4() == 0) {
+        // IP not set, starting DHCP
         _netif.flags |= NETIF_FLAG_UP;
         switch (dhcp_start(&_netif)) {
         case ERR_OK:

libraries/lwIP_w55rp20/examples/WiFiClient-W55RP20/WiFiClient-W55RP20.ino

@@ -8,7 +8,7 @@
 const char* host = "djxmmx.net";
 const uint16_t port = 17;
 
-Wiznet55rp20lwIP eth(20 /* chip select */);
+Wiznet55rp20lwIP eth(1 /* chip select */);
 
 void setup() {
   Serial.begin(115200);

libraries/lwIP_w55rp20/src/utility/w55rp20.h

@@ -51,7 +51,7 @@ public:
         Constructor that uses the default hardware SPI pins
         @param cs the Arduino Chip Select / Slave Select pin (default 10)
     */
-    Wiznet55rp20(int8_t cs = WIZNET_PIO_SPI_CS_PIN, SPIClass& spi = SPI, int8_t intr = -1);
+    Wiznet55rp20(int8_t cs = SS, SPIClass& spi = SPI, int8_t intr = -1);
     //Wiznet55rp20();
 
     /**

libraries/lwIP_w55rp20/src/wiznet_pio_spi.pio.h

@@ -14,7 +14,6 @@
 
 #define wiznet_pio_spi_write_read_wrap_target 0
 #define wiznet_pio_spi_write_read_wrap 8
-#define wiznet_pio_spi_write_read_pio_version 0
 
 #define wiznet_pio_spi_write_read_offset_write_bits 0u
 #define wiznet_pio_spi_write_read_offset_write_end 3u
@@ -39,10 +38,6 @@ static const struct pio_program wiznet_pio_spi_write_read_program = {
     .instructions = wiznet_pio_spi_write_read_program_instructions,
     .length = 9,
     .origin = -1,
-    .pio_version = wiznet_pio_spi_write_read_pio_version,
-#if PICO_PIO_VERSION > 0
-    .used_gpio_ranges = 0x0
-#endif
 };
 
 static inline pio_sm_config wiznet_pio_spi_write_read_program_get_default_config(uint offset) {

package.json

@@ -1,6 +1,6 @@
 {
   "name": "framework-arduinopico",
-  "version": "1.40504.0",
+  "version": "1.40403.0",
   "description": "Arduino Wiring-based Framework (RPi Pico RP2040, RP2350)",
   "keywords": [
     "framework",

package/package_pico_index.template.json

@@ -80,9 +80,6 @@
                   {
                      "name": "Adafruit KB2040"
                   },
-                  {
-                     "name": "Adafruit Feather RP2350 Adalogger"
-                  },
                   {
                      "name": "Adafruit Feather RP2350 HSTX"
                   },
@@ -93,7 +90,7 @@
                      "name": "Adafruit Metro RP2350"
                   },
                   {
-                     "name": "Adafruit Fruit Jam RP2350"
+                     "name": "Adafruit FruitJam RP2350"
                   },
                   {
                      "name": "Amken BunnyBoard"
@@ -215,12 +212,6 @@
                   {
                      "name": "iLabs Challenger 2350 BConnect"
                   },
-                  {
-                     "name": "Makerbase MKS THR36"
-                  },
-                  {
-                     "name": "Makerbase MKS THR42"
-                  },
                   {
                      "name": "Melopero Cookie RP2040"
                   },
@@ -243,13 +234,10 @@
                      "name": "nullbits Bit-C PRO"
                   },
                   {
-                     "name": "Olimex Pico2XL"
+                     "name": "Olimex RP2040-Pico30 2MB"
                   },
                   {
-                     "name": "Olimex Pico2XXL"
-                  },
-                  {
-                     "name": "Olimex RP2040-Pico30"
+                     "name": "Olimex RP2040-Pico30 16MB"
                   },
                   {
                      "name": "Pimoroni PGA2040"
@@ -269,9 +257,6 @@
                   {
                      "name": "Pimoroni Plasma2350"
                   },
-                  {
-                     "name": "Pimoroni Servo2040"
-                  },
                   {
                      "name": "Pimoroni Tiny2040"
                   },
@@ -305,9 +290,6 @@
                   {
                      "name": "Solder Party RP2350 Stamp XL"
                   },
-                  {
-                     "name": "SparkFun IoT RedBoard RP2350"
-                  },
                   {
                      "name": "SparkFun MicroMod RP2040"
                   },
@@ -326,12 +308,6 @@
                   {
                      "name": "SparkFun IoT Node LoRaWAN"
                   },
-                  {
-                     "name": "SparkFun XRP Controller (Beta)"
-                  },
-                  {
-                     "name": "SparkFun XRP Controller"
-                  },
                   {
                      "name": "Seeed INDICATOR RP2040"
                   },
@@ -402,22 +378,22 @@
                "toolsDependencies": [
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-gcc"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-gcc-riscv"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-mklittlefs"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-pioasm"
                   },
                   {
@@ -427,12 +403,12 @@
                   },
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-openocd"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "4.1.0-1aec55e",
+                     "version": "4.0.1-8ec9d6f",
                      "name": "pqt-picotool"
                   }
                ],
@@ -443,187 +419,187 @@
          ],
          "tools": [
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-gcc",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:d3fcb0976c8efd8a883e4ae82fbb863b14b372c2fff32846f340351d13dc1bda",
-                     "size": "107229105"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:cb84f473efda1b8147d552b5e42a20017654fb13ffa8fa6fabdca6b517f0eaa9",
+                     "size": "106002809"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:4f2bb3039761292fcd2962cc90dbbf084f89238a986db69e1f9c272ff81fd7e9",
-                     "size": "115660714"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:f80c0bacbb9e522666e2f41a35a8536dfe1b959532062e63dd052a576ba7f418",
+                     "size": "114435949"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:08c644058405393bf98154acb0a8758aa6673cf19731e2a315d4623c285672d5",
-                     "size": "109176264"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:736679d3aa55ba08ca2cfc4e88e1a71eff2bcba7c4d1aed2f9d3e325bf7f362d",
+                     "size": "107960125"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:4f78f591b20f85587c016f453c254c75fd5ed8438ce218a1286cf630c5813dbb",
-                     "size": "118889455"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:ba8bfadaa28da88777f95de0f28720d4bc6d24367bacc0751fe7f91fabec543d",
+                     "size": "117654636"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.arm-none-eabi-1aec55e.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.arm-none-eabi-1aec55e.250530.zip",
-                     "checksum": "SHA-256:a338b24c481d2df86c403f7caf0aaf97ae4e6d79e4b08cb8355b03faa11e283a",
-                     "size": "126641402"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.arm-none-eabi-8ec9d6f.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.arm-none-eabi-8ec9d6f.240929.zip",
+                     "checksum": "SHA-256:3b9672cbd4ebb32cd1510bfd7839ab0b59f6fac3ecd6151aa0d10047a1c2230a",
+                     "size": "124363537"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:c8555d7d580f7e6157cfc60b205b5a785006f4a3138ffab136a015e19af3104c",
-                     "size": "119805934"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:509820140252eed71cc4148f89c00318febddea08e500ffaa642cb7b7831ba59",
+                     "size": "118604056"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.arm-none-eabi-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:8607c781b7b01032c264b3357889e958998fe2e557342ad0f8153233fa5f7f37",
-                     "size": "116824397"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.arm-none-eabi-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:ae082491cc07d60c014ca928c406aed72c4b1ead4c33076216c77fd2d242f74d",
+                     "size": "115607420"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.arm-none-eabi-1aec55e.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-1aec55e.250530.zip",
-                     "checksum": "SHA-256:f07ec7ac929f56ecadaeabeca67a406133b66ed0b0f5cc3d5ac0e6ffae8f92cf",
-                     "size": "130565828"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.arm-none-eabi-8ec9d6f.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-8ec9d6f.240929.zip",
+                     "checksum": "SHA-256:a1ac18cde856fa01aafc9985a719f3749abd3588ac6725d1781f02da94b84d54",
+                     "size": "128268207"
                   }
                ]
             },
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-picotool",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:53c94035ac6f19c1d9377e31249f3f3adb82ac87ac1f3f7a06e31ca78d4ea5fe",
-                     "size": "856207"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:71eb93270747c5910893f36f5552affd4c254f085b4a7850765b29eec28040ec",
+                     "size": "856205"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:606e2215adc16b57ada4c8873ae58194c721deca489ba18ada9318460b48e662",
-                     "size": "733779"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:1f73e2c6ce8c7503678dfacec3d2ea889e0f5a161912eff68b290cf405206094",
+                     "size": "896502"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:948410645d2deea77117ab5d80719b89c2d0cf8a61158319a3deee9dff74a526",
-                     "size": "683701"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:6cd60632141f68e1bde7afef93dc5521e78dfff2be421ffddd2da76af5bb3eb1",
+                     "size": "840254"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:0acd8d2af8b3486f5caeb39dfaaca83d41dd5e5e5b61125f1d6b1afd6061c806",
-                     "size": "816954"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:bd5acd7d7085ba01bff07fef6ce4a5ba067abd0b8914c33fae371ec87c846d83",
+                     "size": "984652"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.picotool-c56c005.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.picotool-c56c005.250530.zip",
-                     "checksum": "SHA-256:336cfe24722096887deaa13575639f80cc4a65f61c9d8208b0a1d23fdc376939",
-                     "size": "1335370"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.picotool-8a9af99.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.picotool-8a9af99.240929.zip",
+                     "checksum": "SHA-256:9f7c90c4f05996f5156beb4dc06edfc7e0b36006edd6ad273daca0085ea19ac6",
+                     "size": "1335369"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:f82b426d2c47edb4f7b02f0de999bac936c4c139203bbb5b2440c0c12091a553",
-                     "size": "829479"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:a8d30f63e421901000d2b2520f047d1dc586f827f41a3ef52056fd92272ff051",
+                     "size": "829477"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.picotool-c56c005.250530.tar.gz",
-                     "checksum": "SHA-256:354e408e6cbe03d162623f3ce89ee4f82827374cdcc3cb036c95fc39e8efce80",
-                     "size": "770012"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.picotool-8a9af99.240929.tar.gz",
+                     "checksum": "SHA-256:4c5b43afd1e9dba149753089c9715e110f2612cbd47fa005fb033adbe5237ad8",
+                     "size": "926046"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.picotool-c56c005.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.picotool-c56c005.250530.zip",
-                     "checksum": "SHA-256:457509c762a0e9ffccd1363bc7d304e8d3632aa70f772602f3627baacd2a4177",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.picotool-8a9af99.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.picotool-8a9af99.240929.zip",
+                     "checksum": "SHA-256:d4a43c8172f6b32de412a08e4deac4ef50218f5955c9cda85411b252fcecaea3",
                      "size": "1270392"
                   }
                ]
             },
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-openocd",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:6d460848bc2eeaabda53cc622f8e576429256a26ebaad80dbae474ff1b3be440",
-                     "size": "1981026"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:d2f2e615b45cb57dad5bf8cc8637dc047f0e2a2d6d07907b961f82fdc9d9dff1",
+                     "size": "1981025"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:233445bef68e48f4bdbd30a8b322baaf1c6bcac379c680b2d135ac02002ccdb8",
-                     "size": "7355050"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:b9f98837bce6da1e7d2229d8e2a9a2736a433356b82cea678b8fc4e95c3cd30f",
+                     "size": "7354446"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:b527247039041f947af7f7f462eab2abab6986c6f6a60381490f4e933757ebcf",
-                     "size": "7210349"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:5a13e718029d5b86fef880f78e60e7521fcf1952911cd65b4cbfc8ef09a5d37c",
+                     "size": "7209884"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:38cdff7120e3fa370b7a550412c66c168fac9971c52c7938a0e6db57e6fbb0a1",
-                     "size": "6945216"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:fa324ab0a8a20dab6335196e6b8ebb5fb0c083dc4d8017140287068bf85b3b5f",
+                     "size": "6944581"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.openocd-ebec9504d.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.openocd-ebec9504d.250530.zip",
-                     "checksum": "SHA-256:ba78df9fff54be509348f46af2a7a187553593c889fd70293bcd673cdaa6337a",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.openocd-ebec9504d.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.openocd-ebec9504d.240929.zip",
+                     "checksum": "SHA-256:f0d9cd099bb80d9f68b3554ef9233b2576c4959b4d2ce7444a9a5358d3bd40e0",
                      "size": "2597199"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:06489aac36a97be87dff144df57ef7ae6dd525cfc5583c55c2426cb1bdc54d90",
-                     "size": "3193821"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:e06283df22585bf6a83742d364d3594f7bcd724aa8be83de0446c3d1eaca7a58",
+                     "size": "3193818"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.openocd-ebec9504d.250530.tar.gz",
-                     "checksum": "SHA-256:56a4b435e1e3f0b5803946ab48262b97289e2ced1b753806bca1c353e36778e1",
-                     "size": "7376227"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.openocd-ebec9504d.240929.tar.gz",
+                     "checksum": "SHA-256:d8dd0740e16414488de35f5ca1ddfcfe85763fe25d55a46cb9df8698ea83836d",
+                     "size": "7375538"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.openocd-ebec9504d.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.openocd-ebec9504d.250530.zip",
-                     "checksum": "SHA-256:9998c1559a9e9c5bb792405b94690c53eca392cd5e329096efe393ba0b6af246",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.openocd-ebec9504d.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.openocd-ebec9504d.240929.zip",
+                     "checksum": "SHA-256:4c6463c2818f7b9623d1c08c17c6e6036bd8d522631098d8befde5b66ab312f9",
                      "size": "2541780"
                   }
                ]
@@ -698,188 +674,188 @@
                ]
             },
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-gcc-riscv",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:18de7da67984c5675a1591b53605ab118366924b98b9dc11b553530697ddc631",
-                     "size": "141916362"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:2dc5495acf7de48ce8e1c3f723e78102ad06add8e8e5dee86bf1dc05b25147ad",
+                     "size": "139017383"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:df668033e4225950bf6fe6895f94acfd6ceaab8647b12fe6f3277a98d44a3129",
-                     "size": "151826001"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:5d70f84ee56d68583ff61eff6461a4f3e2ecfcd445ffecdbb53e944dd229de5e",
+                     "size": "148943445"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:7e585192865a4bc4c4cd5366c3ed6400b31afc0b802c573c292ee92ce272739d",
-                     "size": "145079225"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:65a3cd450d1b2a18e4bb6192f375e98e82a9808545d517a21357900a931f83f2",
+                     "size": "142237277"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:a0ff84ae6c6a0c96b5bb4ff99b3c20d0228e436051e9aa960bf8168355f3cf6c",
-                     "size": "156843280"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:130a9d0e970609dd27f70a27d5d34ed927b6a270f956f52aec3b636a206d86f6",
+                     "size": "153960388"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.riscv32-unknown-elf-1aec55e.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.riscv32-unknown-elf-1aec55e.250530.zip",
-                     "checksum": "SHA-256:083832808526d5736108f58927c9279719a3a923e8f9027cabd889a48c5f28af",
-                     "size": "163747749"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.riscv32-unknown-elf-8ec9d6f.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.riscv32-unknown-elf-8ec9d6f.240929.zip",
+                     "checksum": "SHA-256:25f985cd7ff242fa93a808582911545529eeab2d84b16ac96509425c11249c36",
+                     "size": "159523471"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:cf49bf9bada0b90cd2db0d3028bcd88a9b9485a2944c219c352e03c6ab2ba389",
-                     "size": "156380254"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:4144abfef1c69cee272b6621dd995a5e88ff1e3cf646c8da30d64d9b1cd44b47",
+                     "size": "153526986"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.riscv32-unknown-elf-1aec55e.250530.tar.gz",
-                     "checksum": "SHA-256:0f7cfbf97e06bdaaef9fd68f364f11cea9ee9f04a72486547a4c6ae66491d0e0",
-                     "size": "154290544"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.riscv32-unknown-elf-8ec9d6f.240929.tar.gz",
+                     "checksum": "SHA-256:63ed149ba20ddc215479eaae5f1709a6bd882f4cd583a52ac2171f9096fda3a5",
+                     "size": "151383989"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.riscv32-unknown-elf-1aec55e.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.riscv32-unknown-elf-1aec55e.250530.zip",
-                     "checksum": "SHA-256:ac6be8c69ee4b2c2153a865fa593f77b6c9c078d43612486cc33ff23cd8d15ab",
-                     "size": "167659589"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.riscv32-unknown-elf-8ec9d6f.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.riscv32-unknown-elf-8ec9d6f.240929.zip",
+                     "checksum": "SHA-256:182b38d22b8a4447b8b335c1ce482d16bfb0720be51d6368b404c8628a372dd8",
+                     "size": "163390255"
                   }
                ]
             },
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-pioasm",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:23aa8d9afacb556aaf97819c953a3a5d75aeee8fd8cfcaa43c36b39b08a5a594",
-                     "size": "268119"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:6afebe366be3aefd1caa268ec309bd486d7f1f98eedba033ba3b83a0653f1184",
+                     "size": "267869"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:fb6df3d97b5e03859617565317dd88092f57e158878b436ae0c54c8113276609",
-                     "size": "644159"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:48ca0fe638bf8ccca654c0588678178c3d9c2f933892dbd67244fe5f5637eacb",
+                     "size": "644212"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:0dd9c0942ddc56044fb684eaf44f8444313b2d3a476c4545863d8e632dc1afc9",
-                     "size": "577126"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:06001c3eaf5fbe29e94634218569d13c8d61d6007f7b8da0cca1e7f1fd9414cc",
+                     "size": "576904"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:2f54fd0355964c4069e9f105ecade3183764ba1e2d57dfd1546d8c065132b619",
-                     "size": "703647"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:09c4db3bf797b2a9f5edc3db05717c32c2fdd045ebca12ffba1c3ba037759470",
+                     "size": "703370"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.pioasm-9fdfe11.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.pioasm-9fdfe11.250530.zip",
-                     "checksum": "SHA-256:ea59960c2a4516b5a4d770613548300d0ae8aab1ec9aa4990cec0251a1a2b0d7",
-                     "size": "797374"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.pioasm-efe2103.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.pioasm-efe2103.240929.zip",
+                     "checksum": "SHA-256:50ec452554c000c692e1f8ee6657a5bb47d99aae62ac10cbf2da3e97cdc45db1",
+                     "size": "797527"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:a69f28aa203a515ea2270a7b274c155c60e1de48a8d5ed1341de50c8d62f238e",
-                     "size": "780687"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:9161b685fe394a6bbc19e3f14082d018d230a33941edd523d163d158f0480422",
+                     "size": "780453"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.pioasm-9fdfe11.250530.tar.gz",
-                     "checksum": "SHA-256:ec079c8964f79bc56fe62eb6bc7d711315ec4e939f853956bf36bffd13555470",
-                     "size": "649984"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.pioasm-efe2103.240929.tar.gz",
+                     "checksum": "SHA-256:974481d6b9678c73cefc3c7df657647bc216f2d6c2bdef12236aa06542246973",
+                     "size": "649767"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.pioasm-9fdfe11.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.pioasm-9fdfe11.250530.zip",
-                     "checksum": "SHA-256:8ec38271642b1b3ae650316b7355d9195812fe805c6c7b6f22b706a56d6c275f",
-                     "size": "929788"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.pioasm-efe2103.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.pioasm-efe2103.240929.zip",
+                     "checksum": "SHA-256:73cc318e0b1df84fcb661ae9322e22a52f49678f44d3766b4baa82b328b19822",
+                     "size": "929510"
                   }
                ]
             },
             {
-               "version": "4.1.0-1aec55e",
+               "version": "4.0.1-8ec9d6f",
                "name": "pqt-mklittlefs",
                "systems": [
                   {
                      "host": "arm64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-apple-darwin20.4.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "aarch64-apple-darwin20.4.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:eb33a68039c3fee582db90efeda9332edb96746b4173d9ac83bb35fed4f0fafd",
-                     "size": "72455"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-apple-darwin20.4.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "aarch64-apple-darwin20.4.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:09ddf3f856f2828e94c1e3599021265eb1e69ed84d659604a638af4a010f4f3d",
+                     "size": "72517"
                   },
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/aarch64-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:e724923d634ce117836b5fd71cc6821282d84d9f4624701bd468b8bfc87b47a1",
-                     "size": "683775"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/aarch64-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:47e276ee0707e78fa4b588ef4346187071ea4be194519d405b8a1da91d34e682",
+                     "size": "684064"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/arm-linux-gnueabihf.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:0d6fdc45d341e88a43186e666d3f968be0919f3934b29eca6e6d7ca09c36c112",
-                     "size": "632909"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/arm-linux-gnueabihf.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:f4fb24a675de0bf3575ed6320ae1053d67355bbd3af116933bb1a90c1989bf57",
+                     "size": "632936"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:853d9e041468aaff05c130f9ebd56a0ed977b750e79d29409f2f5c24b3eb33f7",
-                     "size": "665575"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:29df0ca122767357a7f14a2b5fb6e6d1f912789086dcb5e3c39b9df8d85f908a",
+                     "size": "665594"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/i686-w64-mingw32.mklittlefs-db0513a.250530.zip",
-                     "archiveFileName": "i686-w64-mingw32.mklittlefs-db0513a.250530.zip",
-                     "checksum": "SHA-256:8471d2315ba92137e0b88aea8e71fee4e0834e4b75867c79ffdaa5657ab7c940",
-                     "size": "1232388"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/i686-w64-mingw32.mklittlefs-2f7654f.240929.zip",
+                     "archiveFileName": "i686-w64-mingw32.mklittlefs-2f7654f.240929.zip",
+                     "checksum": "SHA-256:fa9071ee8f806ca7bf1cc16e1cb2be5588908cff929ec91e007dafa33eb4be1c",
+                     "size": "1232212"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-apple-darwin20.4.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin20.4.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:f37c1946df5d2f4047d7703b07b953bb04efd8cf56baa3992c0a6fe625a11158",
-                     "size": "621818"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-apple-darwin20.4.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin20.4.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:50a932d7c0351a70c3ecfce725b2c7bd926ddfb086145c225bb1134ad1b1a5ff",
+                     "size": "621594"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.mklittlefs-db0513a.250530.tar.gz",
-                     "checksum": "SHA-256:a135f6d4a51137c420e92da24469c84d4502f762dd8dc8d6f40bc794508f61ed",
-                     "size": "690394"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.mklittlefs-2f7654f.240929.tar.gz",
+                     "checksum": "SHA-256:aec72ad65cec9a96afda0507605661dfd552d5e304dd654c1b1ebb2bcc9f2d76",
+                     "size": "690461"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.1.0/x86_64-w64-mingw32.mklittlefs-db0513a.250530.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.mklittlefs-db0513a.250530.zip",
-                     "checksum": "SHA-256:7db0ecc013cec3dad4e18987508f8e86c0aecd8453978559220742562aeb05b9",
-                     "size": "1328438"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/4.0.1/x86_64-w64-mingw32.mklittlefs-2f7654f.240929.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.mklittlefs-2f7654f.240929.zip",
+                     "checksum": "SHA-256:83f75c88e8e44fa1a38346ccff2e89756ffcfcda96b5d849f9e6563d996081eb",
+                     "size": "1328984"
                   }
                ]
             }

pico-sdk

@@ -1 +1 @@
-Subproject commit 9fdfe110dc2f44cb4c23f49370db45a6689a5a08
+Subproject commit 95ea6acad131124694cda1c162c52cd30e0aece0

platform.txt

@@ -20,7 +20,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
 
 name=Raspberry Pi RP2040/RP2350 Boards
-version=4.5.4
+version=4.4.3
 
 # Required discoveries and monitors
 # ---------------------------------
@@ -60,7 +60,7 @@ compiler.libbearssl="{runtime.platform.path}/lib/{build.chip}/libbearssl.a"
 compiler.c.cmd={build.toolchain}-gcc
 compiler.c.flags=-c {compiler.warning_flags} {compiler.defines} {compiler.flags} -MMD {compiler.includes} -std=gnu17 -g -pipe
 compiler.c.elf.cmd={build.toolchain}-g++
-compiler.c.elf.flags={compiler.warning_flags} {compiler.defines} {compiler.flags} {build.flags.optimize}
+compiler.c.elf.flags={compiler.warning_flags} {compiler.defines} {compiler.flags} {build.flags.optimize} -u _printf_float -u _scanf_float
 compiler.S.cmd={build.toolchain}-gcc
 compiler.S.flags=-c {compiler.warning_flags} {compiler.defines} -g -x assembler-with-cpp -MMD {compiler.includes} {build.toolchainopts} -g
 compiler.cpp.cmd={build.toolchain}-g++
@@ -203,7 +203,6 @@ tools.uf2conv-network.cmd={runtime.platform.path}/system/python3/python3
 tools.uf2conv-network.upload.protocol=uf2
 tools.uf2conv-network.upload.params.verbose=
 tools.uf2conv-network.upload.params.quiet=
-tools.uf2conv-network.upload.field.password=Password
 tools.uf2conv-network.upload.pattern="{cmd}" -I "{runtime.platform.path}/tools/espota.py" -i "{upload.port.address}" -p "{upload.port.properties.port}" "--auth={upload.field.password}" -f "{build.path}/{build.project_name}.bin"
 
 #tools.picotool.cmd={runtime.tools.pqt-picotool.path}

tools/README.md

@@ -30,15 +30,6 @@ as necessary to add any add'l fields or menus required.  Used because the
 `boards.txt` file is very repetitive and it's safer to generate with code
 than by hand.
 
-## makepacer.cpp
-Generates ``libraries/PWMAudio/src/PWMAudioPrecalc.h` which contains the
-precalculated DMA pacer settings for common audio sample rates and CPU
-frequencies.  Makes setting the frequency for PWMAudio instantaneous.
-
-## makepio.py
-Rebuilds all the ``*.pio`` files in the core and libraries using the
-currently installed pioasm.  Use when a new PIOASM is available.
-
 ## makever.py
 Updates the version info prior to a release in platform.txt, package.json,
 and the version header.   Run from root of the repo.

tools/json/0xcb_helios.json

@@ -30,8 +30,7 @@
         "svd_path": "rp2040.svd"
     },
     "frameworks": [
-        "arduino",
-        "picosdk"
+        "arduino"
     ],
     "name": "Helios",
     "upload": {

tools/json/DudesCab.json

@@ -30,8 +30,7 @@
         "svd_path": "rp2040.svd"
     },
     "frameworks": [
-        "arduino",
-        "picosdk"
+        "arduino"
     ],
     "name": "DudesCab",
     "upload": {

tools/json/MyRP_bot.json

@@ -30,8 +30,7 @@
         "svd_path": "rp2040.svd"
     },
     "frameworks": [
-        "arduino",
-        "picosdk"
+        "arduino"
     ],
     "name": "RP2040",
     "upload": {