adafruit-mirror/arduino-pico
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
arduino-pico/tools/makeboards.py
Earle F. Philhower, III 65fe176795
Make default CPU speed 133MHz (#557) 
The chip supports 133MHz and the other Pico core already defaults to
the higher speed, so make 133 the default.

It can still be changed through the menus and will stay at 125 unless
pre-existing users change it so they will see no difference.
2022-04-27 11:31:21 -07:00

280 lines
14 KiB
Python
Executable file
Raw Blame History

#!/usr/bin/env python3
import os
import sys
def BuildFlashMenu(name, flashsize, fssizelist):
for fssize in fssizelist:
if fssize == 0:
fssizename = "no FS"
elif fssize < 1024 * 1024:
fssizename = "Sketch: %dKB, FS: %dKB" % ((flashsize - fssize) / 1024, fssize / 1024)
else:
fssizename = "Sketch: %dMB, FS: %dMB" % ((flashsize - fssize) / (1024 * 1024), fssize / (1024 * 1024))
mn="%d_%d" % (flashsize, fssize)
print("%s.menu.flash.%s=%dMB (%s)" % (name, mn, flashsize / (1024 * 1024), fssizename))
print("%s.menu.flash.%s.upload.maximum_size=%d" % (name, mn, flashsize - 4096 - fssize))
print("%s.menu.flash.%s.build.flash_length=%d" % (name, mn, flashsize - 4096 - fssize))
print("%s.menu.flash.%s.build.eeprom_start=%d" % (name, mn, int("0x10000000",0) + flashsize - 4096))
print("%s.menu.flash.%s.build.fs_start=%d" % (name, mn, int("0x10000000",0) + flashsize - 4096 - fssize))
print("%s.menu.flash.%s.build.fs_end=%d" % (name, mn, int("0x10000000",0) + flashsize - 4096))
def BuildDebugPort(name):
print("%s.menu.dbgport.Disabled=Disabled" % (name))
print("%s.menu.dbgport.Disabled.build.debug_port=" % (name))
for p in ["Serial", "Serial1", "Serial2"]:
print("%s.menu.dbgport.%s=%s" % (name, p, p))
print("%s.menu.dbgport.%s.build.debug_port=-DDEBUG_RP2040_PORT=%s" % (name, p, p))
def BuildDebugLevel(name):
for l in [ ("None", ""), ("Core", "-DDEBUG_RP2040_CORE"), ("SPI", "-DDEBUG_RP2040_SPI"), ("Wire", "-DDEBUG_RP2040_WIRE"),
("All", "-DDEBUG_RP2040_WIRE -DDEBUG_RP2040_SPI -DDEBUG_RP2040_CORE"), ("NDEBUG", "-DNDEBUG") ]:
print("%s.menu.dbglvl.%s=%s" % (name, l[0], l[0]))
print("%s.menu.dbglvl.%s.build.debug_level=%s" % (name, l[0], l[1]))
def BuildFreq(name):
for f in [ 133, 50, 100, 125, 150, 175, 200, 225, 250, 275, 300]:
warn = ""
if f > 133: warn = " (Overclock)"
print("%s.menu.freq.%s=%s MHz%s" % (name, f, f, warn))
print("%s.menu.freq.%s.build.f_cpu=%dL" % (name, f, f * 1000000))
def BuildOptimize(name):
for l in [ ("Small", "Small", "-Os", " (standard)"), ("Optimize", "Optimize", "-O", ""), ("Optimize2", "Optimize More", "-O2", ""),
("Optimize3", "Optimize Even More", "-O3", ""), ("Fast", "Fast", "-Ofast", " (maybe slower)"), ("Debug", "Debug", "-Og", "") ]:
print("%s.menu.opt.%s=%s (%s)%s" % (name, l[0], l[1], l[2], l[3]))
print("%s.menu.opt.%s.build.flags.optimize=%s" % (name, l[0], l[2]))
def BuildRTTI(name):
print("%s.menu.rtti.Disabled=Disabled" % (name))
print("%s.menu.rtti.Disabled.build.flags.rtti=-fno-rtti" % (name))
print("%s.menu.rtti.Enabled=Enabled" % (name))
print("%s.menu.rtti.Enabled.build.flags.rtti=" % (name))
def BuildBoot(name):
for l in [ ("Generic SPI /2", "boot2_generic_03h_2_padded_checksum"), ("Generic SPI /4", "boot2_generic_03h_4_padded_checksum"),
("IS25LP080 QSPI /2", "boot2_is25lp080_2_padded_checksum"), ("IS25LP080 QSPI /4", "boot2_is25lp080_4_padded_checksum"),
("W25Q080 QSPI /2", "boot2_w25q080_2_padded_checksum"), ("W25Q080 QSPI /4", "boot2_w25q080_4_padded_checksum"),
("W25X10CL QSPI /2", "boot2_w25x10cl_2_padded_checksum"), ("W25X10CL QSPI /4", "boot2_w25x10cl_4_padded_checksum") ]:
print("%s.menu.boot2.%s=%s" % (name, l[1], l[0]))
print("%s.menu.boot2.%s.build.boot2=%s" % (name, l[1], l[1]))
def BuildUSBStack(name):
print("%s.menu.usbstack.picosdk=Pico SDK" % (name))
print('%s.menu.usbstack.picosdk.build.usbstack_flags="-I{runtime.platform.path}/tools/libpico"' % (name))
print("%s.menu.usbstack.tinyusb=Adafruit TinyUSB" % (name))
print('%s.menu.usbstack.tinyusb.build.usbstack_flags=-DUSE_TINYUSB "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"' % (name))
def BuildWithoutUSBStack(name):
print("%s.menu.usbstack.nousb=No USB" % (name))
print('%s.menu.usbstack.nousb.build.usbstack_flags="-DNO_USB -DDISABLE_USB_SERIAL -I{runtime.platform.path}/tools/libpico"' % (name))
def BuildHeader(name, vendor_name, product_name, vidtouse, pidtouse, vid, pid, pwr, boarddefine, variant, uploadtool, flashsize, ramsize, boot2):
prettyname = vendor_name + " " + product_name
print()
print("# -----------------------------------")
print("# %s" % (prettyname))
print("# -----------------------------------")
print("%s.name=%s" % (name, prettyname))
print("%s.vid.0=%s" % (name, vidtouse))
print("%s.pid.0=%s" % (name, pidtouse))
print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid))
print("%s.build.usbpwr=-DUSBD_MAX_POWER_MA=%s" % (name, pwr))
print("%s.build.board=%s" % (name, boarddefine))
print("%s.build.mcu=cortex-m0plus" % (name))
print("%s.build.variant=%s" % (name, variant))
print("%s.upload.tool=%s" % (name, uploadtool))
print("%s.upload.maximum_size=%d" % (name, flashsize))
print("%s.upload.maximum_data_size=%d" % (name, ramsize))
print("%s.upload.wait_for_upload_port=true" % (name))
print("%s.upload.erase_cmd=" % (name))
print("%s.serial.disableDTR=false" % (name))
print("%s.serial.disableRTS=false" % (name))
print("%s.build.f_cpu=125000000" % (name))
print("%s.build.led=" % (name))
print("%s.build.core=rp2040" % (name))
print("%s.build.ldscript=memmap_default.ld" % (name))
print("%s.build.ram_length=%dk" % (name, ramsize / 1024))
print("%s.build.boot2=%s" % (name, boot2))
print("%s.build.vid=%s" % (name, vid))
print("%s.build.pid=%s" % (name, pid))
print('%s.build.usb_manufacturer="%s"' % (name, vendor_name))
print('%s.build.usb_product="%s"' % (name, product_name))
def WriteWarning():
print("# WARNING - DO NOT EDIT THIS FILE, IT IS MACHINE GENERATED")
print("# To change something here, edit tools/makeboards.py and")
print("# run 'python3 makeboards.py > ../boards.txt' to regenerate")
print()
def BuildGlobalMenuList():
print("menu.BoardModel=Model")
print("menu.flash=Flash Size")
print("menu.freq=CPU Speed")
print("menu.opt=Optimize")
print("menu.rtti=RTTI")
print("menu.dbgport=Debug Port")
print("menu.dbglvl=Debug Level")
print("menu.boot2=Boot Stage 2")
print("menu.usbstack=USB Stack")
def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2):
for a, b, c in [ ["", "", "uf2conv"], ["picoprobe", " (Picoprobe)", "picoprobe"], ["picodebug", " (pico-debug)", "picodebug"]]:
n = name + a
p = product_name + b
fssizelist = [ 0, 64 * 1024, 128 * 1024, 256 * 1024, 512 * 1024 ]
for i in range(1, flashsizemb):
fssizelist.append(i * 1024 * 1024)
vidtouse = vid;
ramsizekb = 256;
if a == "picoprobe":
pidtouse = '0x0004'
elif a == "picodebug":
vidtouse = '0x1209'
pidtouse = '0x2488'
ramsizekb = 240;
else:
pidtouse = pid
BuildHeader(n, vendor_name, p, vidtouse, pidtouse, vid, pid, pwr, boarddefine, name, c, flashsizemb * 1024 * 1024, ramsizekb * 1024, boot2)
if name == "generic":
BuildFlashMenu(n, 2*1024*1024, [0, 1*1024*1024])
BuildFlashMenu(n, 4*1024*1024, [0, 2*1024*1024])
BuildFlashMenu(n, 8*1024*1024, [0, 4*1024*1024])
BuildFlashMenu(n, 16*1024*1024, [0, 8*1024*1024])
else:
BuildFlashMenu(n, flashsizemb * 1024 * 1024, fssizelist)
BuildFreq(n)
BuildOptimize(n)
BuildRTTI(n)
BuildDebugPort(n)
BuildDebugLevel(n)
if a == "picodebug":
BuildWithoutUSBStack(n)
else:
BuildUSBStack(n)
if name == "generic":
BuildBoot(n)
MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2)
def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2):
json = """{
"build": {
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_BOARDDEFINE -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=USBPWR",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
]
],
"mcu": "rp2040",
"arduino": {
"earlephilhower": {
"variant": "VARIANTNAME",
"boot2_source": "BOOT2.S",
"usb_vid": "VID",
"usb_pid": "PID",
"usb_manufacturer": "VENDORNAME",
"usb_product": "PRODUCTNAME"
}
}
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "PRODUCTNAME",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": FLASHSIZE,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "VENDORNAME"
}""".replace('VARIANTNAME', name).replace('BOARDDEFINE', boarddefine).replace('BOOT2', boot2).replace('VID', vid).replace('PID', pid).replace('VENDORNAME', vendor_name).replace('PRODUCTNAME', product_name).replace('FLASHSIZE', str(1024*1024*flashsizemb)).replace('USBPWR', str(pwr))
jsondir = os.path.abspath(os.path.dirname(__file__)) + "/json"
f = open(jsondir + "/" + name + ".json", "w")
f.write(json)
f.close()
sys.stdout = open(os.path.abspath(os.path.dirname(__file__)) + "/../boards.txt", "w")
WriteWarning()
BuildGlobalMenuList()
# Note to new board manufacturers: Please add your board so that it sorts
# alphabetically starting with the company name and then the board name.
# Otherwise it is difficult to find a specific board in the menu.
# Raspberry Pi
MakeBoard("rpipico", "Raspberry Pi", "Pico", "0x2e8a", "0x000a", 250, "RASPBERRY_PI_PICO", 2, "boot2_w25q080_2_padded_checksum")
# Adafruit
MakeBoard("adafruit_feather", "Adafruit", "Feather RP2040", "0x239a", "0x80f1", 250, "ADAFRUIT_FEATHER_RP2040", 8, "boot2_w25x10cl_4_padded_checksum")
MakeBoard("adafruit_itsybitsy", "Adafruit", "ItsyBitsy RP2040", "0x239a", "0x80fd", 250, "ADAFRUIT_ITSYBITSY_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("adafruit_qtpy", "Adafruit", "QT Py RP2040", "0x239a", "0x80f7", 250, "ADAFRUIT_QTPY_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("adafruit_stemmafriend", "Adafruit", "STEMMA Friend RP2040", "0x239a", "0x80e3", 250, "ADAFRUIT_STEMMAFRIEND_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("adafruit_trinkeyrp2040qt", "Adafruit", "Trinkey RP2040 QT", "0x239a", "0x8109", 250, "ADAFRUIT_TRINKEYQT_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("adafruit_macropad2040", "Adafruit", "MacroPad RP2040", "0x239a", "0x8107", 250, "ADAFRUIT_MACROPAD_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("adafruit_kb2040", "Adafruit", "KB2040", "0x239a", "0x8105", 250, "ADAFRUIT_KB2040_RP2040", 8, "boot2_w25q080_2_padded_checksum")
# Arduino
MakeBoard("arduino_nano_connect", "Arduino", "Nano RP2040 Connect", "0x2341", "0x0058", 250, "NANO_RP2040_CONNECT", 16, "boot2_w25q080_2_padded_checksum")
# Cytron
MakeBoard("cytron_maker_nano_rp2040", "Cytron", "Maker Nano RP2040", "0x2e8a", "0x100f", 250, "CYTRON_MAKER_NANO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
MakeBoard("cytron_maker_pi_rp2040", "Cytron", "Maker Pi RP2040", "0x2e8a", "0x1000", 250, "CYTRON_MAKER_PI_RP2040", 2, "boot2_w25q080_2_padded_checksum")
# DeRuiLab
MakeBoard("flyboard2040_core", "DeRuiLab", "FlyBoard2040Core", "0x2e8a", "0x008a", 500, "FLYBOARD2040_CORE", 4, "boot2_generic_03h_4_padded_checksum")
# DFRobot
MakeBoard("dfrobot_beetle_rp2040", "DFRobot", "Beetle RP2040", "0x3343", "0x4253", 250, "DFROBOT_BEETLE_RP2040", 2, "boot2_w25q080_2_padded_checksum")
# iLabs
MakeBoard("challenger_2040_lora", "iLabs", "Challenger 2040 LoRa", "0x2e8a", "0x1023", 250, "CHALLENGER_2040_LORA_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("challenger_2040_wifi", "iLabs", "Challenger 2040 WiFi", "0x2e8a", "0x1006", 250, "CHALLENGER_2040_WIFI_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("challenger_2040_lte", "iLabs", "Challenger 2040 LTE", "0x2e8a", "0x100b", 500, "CHALLENGER_2040_LTE_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("challenger_nb_2040_wifi", "iLabs", "Challenger NB 2040 WiFi", "0x2e8a", "0x100b", 500, "CHALLENGER_NB_2040_WIFI_RP2040", 8, "boot2_w25q080_2_padded_checksum")
MakeBoard("ilabs_rpico32", "iLabs", "RPICO32", "0x2e8a", "0x1010", 250, "ILABS_2040_RPICO32_RP2040", 8, "boot2_w25q080_2_padded_checksum")
# Melopera
MakeBoard("melopero_shake_rp2040", "Melopero", "Shake RP2040", "0x2e8a", "0x1005", 250, "MELOPERO_SHAKE_RP2040", 16, "boot2_w25q080_2_padded_checksum")
# Solder Party
MakeBoard("solderparty_rp2040_stamp", "Solder Party", "RP2040 Stamp", "0x1209", "0xa182", 500, "SOLDERPARTY_RP2040_STAMP", 8, "boot2_generic_03h_4_padded_checksum")
# SparkFun
MakeBoard("sparkfun_promicrorp2040", "SparkFun", "ProMicro RP2040", "0x1b4f", "0x0026", 250, "SPARKFUN_PROMICRO_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
MakeBoard("sparkfun_thingplusrp2040", "SparkFun", "Thing Plus RP2040", "0x1b4f", "0x0026", 250, "SPARKFUN_THINGPLUS_RP2040", 16, "boot2_w25q080_2_padded_checksum")
# Upesy
MakeBoard("upesy_rp2040_devkit", "uPesy", "RP2040 DevKit", "0x2e8a", "0x1007", 250, "UPESY_RP2040_DEVKIT", 2, "boot2_w25q080_2_padded_checksum")
# Seeed
MakeBoard("seeed_xiao_rp2040", "Seeed", "XAIO RP2040", "0x2e8a", "0x000a", 250, "SEEED_XAIO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
# WIZnet
MakeBoard("wiznet_5100s_evb_pico", "WIZnet", "W5100S-EVB-Pico", "0x2e8a", "0x1008", 250, "WIZNET_5100S_EVB_PICO", 2, "boot2_w25q080_2_padded_checksum")
# Generic
MakeBoard("generic", "Generic", "RP2040", "0x2e8a", "0xf00a", 250, "GENERIC_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
sys.stdout.close()
Reference in a new issue View git blame Copy permalink