Blinka Fixes

_blinka/0xcb_helios.md

@@ -1,39 +0,0 @@
----
-layout: download
-board_id: "0xcb_helios"
-title: "0xCB Helios Download"
-name: "Helios"
-manufacturer: "0xCB"
-board_url: "https://github.com/0xCB-dev/0xCB-Helios"
-board_image: "0xcb_helios.jpg"
-download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-any-computer-with-raspberry-pi-pico"
-date_added: 2023-01-05
-features:
----
-
-The 0xCB Helios is our Elite-C compatible MicroController, based on the high-performance and affordable RP2040.
-
-It's a drop-in replacement for legacy ProMicro boards.
-
-## Technical details
-
-- **Powerful RP2040** 32-bit Cortex M0+ dual core running at 133 MHz and 264kB SRAM.
-- **16MB/128Mb QSPI FLASH** chip for storing files and code
-- **Only 3.16 mm thick** thanks to a mid-mounted USB-C port
-- 3.3V 500mA LDO, PTC fuse and **ESD protection** chip
-- Elite-C, Pro Micro, SparkFun Pro Micro RP2040, and nice!Nano compatible pinout (follows the **BastardKb standard**)
-- **8 extra I/O pins**: (GP12-GP16) added along the bottom edge, (GP10-GP11) at the top and a 5V level shifted pin to drive RGB LEDs for example (GP25)
-- **25 available digital pins** for a maximum of 13x12 = 156 switches (using a standard matrix)
-- Default off **red power LED** (selectable via a jumper on the left side)
-- **blue user LED** on pin GP17
-- 4 pins configurable as **analog inputs**
-- **USB D+/D- broken out** for use with an external USB socket/daughterboard
-- **USB VBUS detection** on GPIO19 for split keyboard side detection
-- **UF2 bootloader** for drag & drop programming via your file manager
-- easy to use and backward compatible **Single button boot and reset circuit** push to reset and hold >500ms to enter bootloader (legacy boards with reset buttons will continue to work!)
-- **RAW / VBUS** output, for powering RGB LEDs or other 5 V devices. The jumper on top lets you skip over the 500 mA fuse and Schottky diode, for up to 3A from USB ports.
-- **USB-C connector** lets you access built-in ROM USB bootloader and serial port debugging
-
-## Purchase
-
-- [KeebSupply](https://keeb.supply/products/0xcb-helios)

_blinka/jetson_orin_nano.md

@@ -1,11 +1,11 @@
 ---
 layout: download
-board_id: "jetson_orin_nx"
-title: "Jetson Orin NX AI Dev Kit Download"
-name: "Jetson Orin NX AI Dev Kit"
+board_id: "jetson_orin_nano"
+title: "Jetson Orin Nano Dev Kit Download"
+name: "Jetson Orin Nano Dev Kit"
 manufacturer: "NVIDIA"
 board_url: "https://www.nvidia.com/en-us/autonomous-machines/embedded-systems/jetson-orin/"
-board_image: "jetson_orin_nx.jpg"
+board_image: "jetson_orin_nano.jpg"
 download_instructions: ""
 downloads_display: true
 blinka: true

_blinka/pyboard_v11.md

@@ -4,6 +4,7 @@ board_id: "pyboard_v11"
 title: "Pyboard Download"
 name: "Pyboard"
 manufacturer: "Damien George"
+blinka: true
 board_url: "https://www.adafruit.com/product/2390"
 board_image: "pyboard_v11.jpg"
 date_added: 2021-5-24

check-boards.py

@@ -106,6 +106,23 @@ def verify_contribute_not_present(folder):
             print(f"Contribute Section found for {board_id} in {folder}")
     return valid
 
+def verify_blinka_board(folder):
+    # Check that blinka flag is set for all boards in the folder
+    valid = True
+    for filename in Path(folder).glob("*.md"):
+        with open(filename, "rt") as f:
+            metadata, _ = frontmatter.parse(f.read())
+        downloads_display = metadata.get('downloads_display')
+        if downloads_display is None or downloads_display:
+            board_id = metadata.get('board_id') or ()
+            if board_id == "unknown":
+                continue
+            blinka_flag = metadata.get('blinka')
+            if blinka_flag is None or blinka_flag == False:
+                print(f"blinka field is not set to True for {board_id}")
+                valid = False
+    return valid
+
 if not verify_features("_board", acceptable_features):
     print("Non-standard features found. See https://learn.adafruit.com/how-to-add-a-new-board-to-the-circuitpython-org-website/adding-to-downloads for acceptable features")
     raise SystemExit(True)
@@ -148,4 +165,8 @@ if not verify_contribute_not_present("_board") or not verify_contribute_not_pres
     print("Contribute section found. This should not be there since it is automatically added.")
     raise SystemExit(True)
 
+if not verify_blinka_board("_blinka"):
+    print("blinka flag missing or false for some Blinka boards. This should be set to true.")
+    raise SystemExit(True)
+
 raise SystemExit(False)