The PIC16 port didn't catch up with the other ports, so it required a bit
of work to make it build with the latest version of XC16.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
In `deque_subscr()`, if `index_val` equals `self->alloc`, the index
correction `index_val -= self->alloc` does not execute, leading to an
out-of-bounds access in `self->items[index_val]`.
The fix in this commit ensures that the index correction is applied
whenever `index_val >= self->alloc`, preventing access beyond the allocated
buffer size.
Signed-off-by: Jan Sturm <jansturm92@googlemail.com>
The PIC16 port didn't catch up with the other ports, so it required a bit
of work to make it build with the latest version of XC16.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This is necessary for mbedTLS callbacks that do not carry any user state,
so those callbacks can be customised per SSL context.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
When descriptors are enabled, lookup of the `__get__`, `__set__` and
`__delete__` descriptor methods should not be delegated to `__getattr__`.
That follows CPython behaviour.
Signed-off-by: Damien George <damien@micropython.org>
Check a target exists before accessing properties. Otherwise
usermod_gather_sources would recurse into garbage property names and break.
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Allowing passing keyword arguments to a native base's __init__, i.e.
`make_new` in the C code. Previously only positional arguments were
allowed.
The main trade-off in this commit is that every call to the native base's
`make_new` is now going to be preceded by a call to
`mp_map_init_fixed_table` even though most of what that does is unused and
instead it merely serves as a way to pass the number of keyword arguments.
Fixes issue #15465.
Signed-off-by: stijn <stijn@ignitron.net>
The ESP32 port contains a workaround to avoid having a certain function
in `py/parse.c` being generated incorrectly. The compiler in question
is not part of any currently supported version of ESP-IDF anymore, and the
problem inside the compiler (well, assembler in this case) has been
corrected a few years ago.
This commit removes all traces of that workaround from the source tree.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit fixes the addition of a stray separator before the number
when printing an MPZ-backed integer and the first group is three digits
long.
This fixes#8984.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit adds a new `RingIO` type which exposes the internal ring-buffer
code for general use in Python programs. It has the stream interface
making it similar to `StringIO` and `BytesIO`, except `RingIO` has a fixed
buffer size and is automatically safe when reads and writes are in
different threads or an IRQ.
This new type is enabled at the "extra features" ROM level.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Otherwise it's very difficult to reason about thread safety in a
scheduler callback, as it can run at any time on any thread - including
racing against any bytecode operation on any thread.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
When MicroPython is used as a submodule and built from the containing
project, e.g. for the embed port, `make submodules` fails because it goes
looking for the sub-sub-module paths in the outer repository instead of in
the micropython repository. Fix this by invoking git inside the micropython
submodule.
Signed-off-by: Christian Walther <cwalther@gmx.ch>
The RV32 emitter used an additional temporary register, as certain code
sequences required extra storage. This commit removes its usage in all
but one case, using REG_TEMP2 instead.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The RV32 emitter sometimes generated short load opcodes even when it
was not supposed to. This commit fixes an off-by-one error in its
offset eligibility range calculation and corrects one case of offset
calculation, operating on the raw label index number rather than its
effective offset in the stack (C.LW assumes all loads are
word-aligned).
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The RV32 emitter always scheduled short jumps even outside the emit
compiler pass. Running the full test suite through the native emitter
instead of just the tests that depend on the emitter at runtime (as in,
`micropython/native_*` and `micropython/viper_* tests`) uncovered more
places where the invalid behaviour was still present.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Skip whitespace characters between pairs of hex numbers.
This makes `bytes.fromhex()` compatible with cpython.
Includes simple test in `tests/basic/builtin_str_hex.py`.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
Currently the stack limit margin is hard-coded in each port's call to
`mp_stack_set_limit()`, but on threaded ports it's fiddlier and can lead to
bugs (such as incorrect thread stack margin on esp32).
This commit provides a new API to initialise the C Stack in one function
call, with a config macro to set the margin. Where possible the new call
is inlined to reduce code size in thread-free ports.
Intended replacement for `MP_TASK_STACK_LIMIT_MARGIN` on esp32.
The previous `stackctrl.h` API is still present and unmodified apart from a
deprecation comment. However it's not available when the
`MICROPY_PREVIEW_VERSION_2` macro is set.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
These were changed in v1.11 (2019). Prepare to remove the compatibility
macros as part of V2 changes.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is needed for a workaround on esp32 port (in child commit),
which produces incorrect results otherwise.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The `emit_load_reg_with_object()` helper function will clobber `REG_TEMP0`.
This is currently OK on architectures where `REG_RET` and `REG_TEMP0` are
the same (all architectures except RV32), because all callers of
`emit_load_reg_with_object()` use either `REG_RET` or `REG_TEMP0` as the
destination register. But on RV32 these registers are different and so
when `REG_RET` is the destination, `REG_TEMP0` is clobbered, leading to
incorrectly generated machine code.
This commit fixes the issue simply by using `REG_TEMP0` as the destination
register for all uses of `emit_load_reg_with_object()`, and adds a comment
to make sure the caller of this function is careful.
Signed-off-by: Damien George <damien@micropython.org>
Introduce SRC_USERMOD_LIB_ASM to allow users to include assembly files as
part of their user modules. It could be used to include optimized
functions or outputs of other programming languages.
Signed-off-by: George Hopkins <george-hopkins@null.net>
Use explicit casts to suppress warnings about implicit conversions, add a
workaround for constant expression conditional, and make functions static
inline (as is done in the rest of the codebase) to suppress 'warning C4505:
unreferenced function with internal linkage has been removed'.
(Follow up to fix commit 908ab1ceca)
Signed-off-by: stijn <stijn@ignitron.net>
This fixes various null dereferencing and out-of-bounds access because
super_attr assumes the held obj is effectively an object of the held type,
which is now verified.
Fixes issue #12830.
Signed-off-by: stijn <stijn@ignitron.net>
When subclassing a native type, calling native members in `__init__` before
`super().__init__()` has been called could cause a crash. In this
situation, `self` in `mp_convert_member_lookup` is the
`native_base_init_wrapper_obj`. The check added in this commit ensures
that an `AttributeError` is raised before this happens, which is consistent
with other failed lookups.
Also fix a typo in a related comment.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
These are old, unused, and most of them no longer compile. The `gc_test()`
function is superseded by the test suite.
Signed-off-by: Damien George <damien@micropython.org>
Also put this function inside the `MICROPY_PY_BUILTINS_SLICE` guard,
because it's only usable when that option is enabled.
Signed-off-by: Damien George <damien@micropython.org>
These TODOs don't need to be done:
- Calling functions with keyword arguments is less common than without
them, so adding an extra byte overhead to all calls regardless of whether
they use keywords or not would overall increase generated bytecode size.
- Restricting `range` objects to machine-sized ints has been adequate for
a long time now, so no need to change that and make it more complicated
and slower.
- Printing spaces in tab completion does not need to be optimised.
Signed-off-by: Damien George <damien@micropython.org>
Being able to send data out in LSB format can be useful, and having support
in the low-level driver is much better than requiring Python code to
reorder the bits before sending them / after receiving them. In particular
if the hardware does not support the LSB format (eg RP2040) then one needs
to use the SoftSPI in LSB mode.
For this change a default definition of `MICROPY_PY_MACHINE_SPI_MSB/_LSB`
was added to `py/mpconfig.h`, making them available to all ports. The
identical defines in `esp32/mpconfigport.h` were deleted.
Resolves issues #5340, #11404.
Signed-off-by: robert-hh <robert@hammelrath.com>
The limit is set by a `MICROPY_PY_MACHINE_FREQ_NUM_ARGS_MAX` define, which
defaults to 1 and is set for stm32 to 4.
For stm32 this fixes a regression introduced in commit
e1ec6af654 where the maximum number of
arguments was changed from 4 to 1.
Signed-off-by: robert-hh <robert@hammelrath.com>
Use new function mp_obj_new_str_from_cstr() where appropriate. It
simplifies the code, and makes it smaller too.
Signed-off-by: Jon Foster <jon@jon-foster.co.uk>
There were lots of places where this pattern was duplicated, to convert a
standard C string to a MicroPython string:
x = mp_obj_new_str(s, strlen(s));
This commit provides a simpler method that removes this code duplication:
x = mp_obj_new_str_from_cstr(s);
This gives clearer, and probably smaller, code.
Signed-off-by: Jon Foster <jon@jon-foster.co.uk>
As per discussion in #15347, non-standard binary literals have been
removed in favour of their hexadecimal counterparts.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Before this change, long/mpz ints propagated into all future calculations,
even if their value could fit in a small-int object. With this change, the
result of a big-int binary op will now be converted to a small-int object
if the value fits in a small-int.
For example, a relatively common operation like `x = a * b // c` where
a,b,c all small ints would always result in a long/mpz int, even if it
didn't need to, and then this would impact all future calculations with
x.
This adds +24 bytes on PYBV11 but avoids heap allocations and potential
surprises (e.g. `big-big` is now a small `0`, and can safely be accessed
with MP_OBJ_SMALL_INT_VALUE).
Performance tests are unchanged on PYBV10, except for `bm_pidigits.py`
which makes heavy use of big-ints and gains about 8% in speed.
Unix coverage tests have been updated to cover mpz code that is now
unreachable by normal Python code (removing the unreachable code would lead
to some surprising gaps in the internal C functions and the functionality
may be needed in the future, so it is kept because it has minimal
overhead).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit changes a few code sequences to use more compressed opcodes
where possible. The sequences in question are the ones that show up the
most in the test suite and require the least amount of code changes, namely
short offset loads from memory to RET/ARG registers, indirect calls through
the function table, register-based jumps, locals' offset calculation,
reg-is-null jumps, and register comparisons.
There are no speed losses or gains from these changes, but there is an
average 15-20% generated code size reduction.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
If `array.append()` fails with an exception due to heap exhaustion, the
next attempt to grow the buffer will cause a buffer overflow because the
free slot count is increased before performing the allocation, and will
stay as if the allocation succeeded.
Signed-off-by: Yoctopuce <dev@yoctopuce.com>
Fixes and improvements to `int.to_bytes()` are:
- No longer overflows if byte size is 0 (closes#13041).
- Raises OverflowError in any case where number won't fit into byte length
(now matches CPython, previously MicroPython would return a truncated
bytes object).
- Document that `micropython int.to_bytes()` doesn't implement the optional
signed kwarg, but will behave as if `signed=True` when the integer is
negative (this is the current behaviour). Add tests for this also.
Requires changes for small ints, MPZ large ints, and "long long" large
ints.
Adds a new set of unit tests for ints between 32 and 64 bits to increase
coverage of "long long" large ints, which are otherwise untested.
Tested on unix port (64 bit small ints, MPZ long ints) and Zephyr STM32WB
board (32 bit small ints, long long large ints).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The code generating the entry to the finally handler of an async-with
statement was simply wrong for the case of the native emitter. Among other
things the layout of the stack was incorrect.
This is fixed by this commit. The setup of the async-with finally handler
is now put in a dedicated emit function, for both the bytecode and native
emitters to implement in their own way (the bytecode emitter is unchanged,
just factored to a function).
With this fix all of the async-with tests now work when using the native
emitter.
Signed-off-by: Damien George <damien@micropython.org>
A value thrown/injected into a native generator needs to be stored in a
dedicated variable outside `nlr_buf_t`, following the `inject_exc` variable
in `py/vm.c`.
Signed-off-by: Damien George <damien@micropython.org>
This emitter prints out pseudo-machine instructions, instead of the usual
output of the native emitter. It can be enabled on any port via
`MICROPY_EMIT_NATIVE_DEBUG` (make sure other native emitters are disabled)
but the easiest way to use it is with mpy-cross:
$ mpy-cross -march=debug file.py
Signed-off-by: Damien George <damien@micropython.org>
Selected load/store code sequences have been optimised for RV32IMC when the
chance to use fewer and smaller opcodes was possible.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
MPY files can now hold generated RV32IMC native code. This can be
accomplished by passing the `-march=rv32imc` flag to mpy-cross.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This adds a native code generation backend for RISC-V RV32I CPUs, currently
limited to the I, M, and C instruction sets.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This fixes a minor issue in the changes made by
7dff38fdc1: the type flags for deque were
meant to be conditionalized based on MICROPY_PY_COLLECTIONS_DEQUE_ITER, but
the computed conditionalized value wasn't used.
Signed-off-by: Dan Halbert <halbert@halwitz.org>
Allows passing in a callback to `TaskQueue()` that is called when something
is pushed on to the queue.
Signed-off-by: Damien George <damien@micropython.org>
Support for raw str/bytes already exists, and extending that to raw
f-strings is easy. It also reduces code size because it eliminates an
error message.
Signed-off-by: Damien George <damien@micropython.org>
This is quite a simple and small change to support concatenation of
adjacent f-strings, and improve compatibility with CPython.
Signed-off-by: Damien George <damien@micropython.org>
Also define `mp_type_bytearray`. These all help to write native modules.
Signed-off-by: Brian Pugh <bnp117@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
Enable BLE where we can. Switch 4MB, non-USB board default partitioning
over to a single 2MB firmware bank. Old boards override this setting to
keep the same behavior.
This also adds alpha support for the ESP32-C2 (aka ESP8684).
Fixes#5926 and fixes#7170
gcc -fsanitize=undefined reports diagnostics like these:
```
../../src/bitstream.c:93:36: runtime error: left shift of 177 by 24 places cannot be represented in type 'int'
../../src/imdct.c:86:53: runtime error: left shift of negative value -937
```
-fwrapv provides implementation-defined behavior that matches the expectations of two's complement arithmetic.
Although the original motivation given for the workaround[1] is correct,
nlr.o and nlrthumb.o are linked with a small enough distance that the
problem does not occur, and the workaround isn't necessary. The distance
between the b instruction and its target (nlr_push_tail) is just 64
bytes[2], well within the ±2046 byte range addressable by an
unconditional branch instruction in Thumb mode.
The workaround induces a relocation in the text section (textrel), which
isn't supported everywhere, notably not on musl-libc[3], where it causes
a crash on start-up. With the workaround removed, micropython works on an
ARMv5T Linux system built with musl-libc.
This commit changes nlrthumb.c to use a direct jump by default, but
leaves the long jump workaround as an option for those cases where it's
actually needed.
[1]: commit dd376a239d
Author: Damien George <damien.p.george@gmail.com>
Date: Fri Sep 1 15:25:29 2017 +1000
py/nlrthumb: Get working again on standard Thumb arch (ie not Thumb2).
"b" on Thumb might not be long enough for the jump to nlr_push_tail so
it must be done indirectly.
[2]: Excerpt from objdump -d micropython:
000095c4 <nlr_push_tail>:
95c4: b510 push {r4, lr}
95c6: 0004 movs r4, r0
95c8: f02d fd42 bl 37050 <mp_thread_get_state>
95cc: 6943 ldr r3, [r0, #20]
95ce: 6023 str r3, [r4, #0]
95d0: 6144 str r4, [r0, #20]
95d2: 2000 movs r0, #0
95d4: bd10 pop {r4, pc}
000095d6 <nlr_pop>:
95d6: b510 push {r4, lr}
95d8: f02d fd3a bl 37050 <mp_thread_get_state>
95dc: 6943 ldr r3, [r0, #20]
95de: 681b ldr r3, [r3, #0]
95e0: 6143 str r3, [r0, #20]
95e2: bd10 pop {r4, pc}
000095e4 <nlr_push>:
95e4: 60c4 str r4, [r0, #12]
95e6: 6105 str r5, [r0, #16]
95e8: 6146 str r6, [r0, #20]
95ea: 6187 str r7, [r0, #24]
95ec: 4641 mov r1, r8
95ee: 61c1 str r1, [r0, #28]
95f0: 4649 mov r1, r9
95f2: 6201 str r1, [r0, #32]
95f4: 4651 mov r1, sl
95f6: 6241 str r1, [r0, #36] @ 0x24
95f8: 4659 mov r1, fp
95fa: 6281 str r1, [r0, #40] @ 0x28
95fc: 4669 mov r1, sp
95fe: 62c1 str r1, [r0, #44] @ 0x2c
9600: 4671 mov r1, lr
9602: 6081 str r1, [r0, #8]
9604: e7de b.n 95c4 <nlr_push_tail>
[3]: https://www.openwall.com/lists/musl/2020/09/25/4
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
This runs in the Renode simulator and enables easier tracing and
debugging of the CircuitPython core. This port can also serve as
a starting point for new ports because it implements the minimal
necessary for the CP core to run.
Two cases, one assigning to a slice.
Closes https://github.com/micropython/micropython/issues/13283
Second is extending a slice from itself, similar logic.
In both cases the problem occurs when m_renew causes realloc to move the
buffer, leaving a dangling pointer behind.
There are more complex and hard to fix cases when either argument is a
memoryview into the buffer, currently resizing to a new address breaks
memoryviews into that object.
Reproducing this bug and confirming the fix was done by running the unix
port under valgrind with GC-aware extensions.
Note in default configurations with GIL this bug exists but has no impact
(the free buffer won't be reused while the function is still executing, and
is no longer referenced after it returns).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit swaps the order of the `flags` and `name` struct initialisers
for `mp_obj_type_t`, to fix an incompatibility with C++. The original
order of the initialiser didn't match the definition of the type, and
although that's still legal C, it's not legal C++.
Signed-off-by: Vonasmic <kasarkal123@gmail.com>
It is enabled on:
* SAMD51 boards with 1MB flash (SKU ending in 20A)
* Feather RP2040 DVI. Others have PIO usb host.
* All ESP32 boards.
* All nRF boards
Fixes#8676
This is required because the .mpy native ABI was changed by the
introduction of `mp_proto_fun_t`, see commits:
- 416465d81e
- 5e3006f117
- e2ff00e811
And three `mp_binary` functions were added to `mp_fun_table` in
commit d2276f0d41.
Signed-off-by: Damien George <damien@micropython.org>
These are needed to read/write array.array objects, which is useful in
native code to provide fast extensions that work with big arrays of data.
Signed-off-by: Damien George <damien@micropython.org>
Newer versions of gcc (14 and up) have more sophisticated dead-code
detection, and the asm clobbers list needs to contain "memory" to inform
the compiler that the asm code actually does something.
Tested that adding this "memory" line does not change the generated code on
ARM Thumb2, x86-64 and Xtensa targets (using gcc 13.2).
Fixes issue #14115.
Signed-off-by: Damien George <damien@micropython.org>
Enabled by MICROPY_COMPILE_ALLOW_TOP_LEVEL_AWAIT. When enabled, this means
that scope such as module-level functions and REPL statements can yield.
The outer C code must then handle this yielded generator.
Signed-off-by: Damien George <damien@micropython.org>
This fixes a bug where a random Python object may become
un-garbage-collectable until an enclosing Python file (compiled on device)
finishes executing.
Details:
The mp_parse_tree_t structure is stored on the stack in top-level functions
such as parse_compile_execute() in pyexec.c (and others).
Although it quickly falls out of scope in these functions, it is usually
still in the current stack frame when the compiled code executes. (Compiler
dependent, but usually it's one stack push per function.)
This means if any Python object happens to allocate at the same address as
the (freed) root parse tree chunk, it's un-garbage-collectable as there's a
(dangling) pointer up the stack referencing this same address.
As reported by @GitHubsSilverBullet here:
https://github.com/orgs/micropython/discussions/14116#discussioncomment-8837214
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit implements the 'e' half-float format: 10-bit mantissa, 5-bit
exponent. It uses native _Float16 if supported by the compiler, otherwise
uses custom bitshifting encoding/decoding routines.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Damien George <damien@micropython.org>
ASM_NOT_REG is optional, it can be synthesised by xor(reg, -1).
ASM_NEG_REG can also be synthesised with a subtraction, but most
architectures have a dedicated instruction for it.
Signed-off-by: Damien George <damien@micropython.org>
Add `pop()`, `appendleft()`, and `extend()` methods, support iteration
and indexing, and initializing from an existing sequence.
Iteration and indexing (subscription) have independent configuration flags
to enable them. They are enabled by default at the same level that
collections.deque is enabled (the extra features level).
Also add tests for checking new behavior.
Signed-off-by: Damien George <damien@micropython.org>
This new machine-module driver provides a "USBDevice" singleton object and
a shim TinyUSB "runtime" driver that delegates the descriptors and all of
the TinyUSB callbacks to Python functions. This allows writing arbitrary
USB devices in pure Python. It's also possible to have a base built-in
USB device implemented in C (eg CDC, or CDC+MSC) and a Python USB device
added on top of that.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.
Signed-off-by: Damien George <damien@micropython.org>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This call used to be needed when there was an `emit_bc_pre()` function that
needed to be called at the start of each emitted bytecode. But in
8e7745eb31 that function was removed and now
the call to `mp_emit_bc_adjust_stack_size()` does nothing when adjusting by
0 entries, so it can be removed.
Signed-off-by: Damien George <damien@micropython.org>
For boards with MICROPY_CONFIG_ROM_LEVEL_AT_LEAST_CORE_FEATURES and up.
This gets samd21 boards working (which need the vfs module in _boot.py),
B_L072Z_LRWAN1, and nrf boards with smaller MCUs that use CORE or BASIC
feature levels.
Signed-off-by: robert-hh <robert@hammelrath.com>
This is now easy to support, since the first machine-word of a native
function tells how to find the prelude, from which the function name can be
extracted in the same way as for bytecode.
Signed-off-by: Damien George <damien@micropython.org>
Now native functions and native generators have similar behaviour: the
first machine-word of their code is an index to get to the prelude. This
simplifies the handling of these types of functions, and also reduces the
size of the emitted native machine code by no longer requiring special code
at the start of the function to load a pointer to the prelude.
Signed-off-by: Damien George <damien@micropython.org>
Viper functions are quite different to native functions and benefit from
being a separate type. For example, viper functions don't have a bytecode-
style prelude, and don't support generators or default arguments.
Signed-off-by: Damien George <damien@micropython.org>
They are no longer used. The new `mp_obj_malloc_with_finaliser()` macros
should be used instead, which force the setting of the `base.type` field.
And there's always `m_malloc_with_finaliser()` if needed.
Signed-off-by: Damien George <damien@micropython.org>
Following 709e8328d9.
Using this helps to reduce code size. And it ensure that the type is
always set as soon as the object is allocated, which is important for the
GC to function correctly.
Signed-off-by: Damien George <damien@micropython.org>
MICROPY_GIT_HASH was removed in 69e34b6b6b
but it is useful for, and used by, third-party code to tell which hash of
MicroPython is used.
Signed-off-by: Damien George <damien@micropython.org>
Allows bytecode itself to be used instead of an mp_raw_code_t in the simple
and common cases of a bytecode function without any children.
This can be used to further reduce frozen code size, and has the potential
to optimise other areas like importing.
Signed-off-by: Damien George <damien@micropython.org>
To simplify their access and reduce code size.
The `scope_flags` member is only ever used to determine if a function is a
generator or not, so make it reflect that fact as a bool type.
Signed-off-by: Damien George <damien@micropython.org>
The `asm_n_pos_args` and `asm_type_sig` members of `mp_raw_code_t` are only
used for raw codes of type MP_CODE_NATIVE_ASM, which are rare, for example
in frozen code. So using a truncated `mp_raw_code_t` in these cases helps
to reduce frozen code size on targets that have MICROPY_EMIT_INLINE_ASM
enabled.
With this, change in firmware size of RPI_PICO builds is -648.
Signed-off-by: Damien George <damien@micropython.org>
The mp_raw_code_t struct has been reordered and some members resized. The
`n_pos_args` member is renamed to `asm_n_pos_args`, and `type_sig` renamed
to `asm_type_sig` to indicate that these are used only for the inline-asm
emitters. These two members are also grouped together in the struct.
The justifications for resizing the members are:
- `fun_data_len` can be 32-bits without issue
- `n_children` is already limited to 16-bits by
`mp_emit_common_t::ct_cur_child`
- `scope_flags` is already limited to 16-bits by `scope_t::scope_flags`
- `prelude_offset` is already limited to 16-bits by the argument to
`mp_emit_glue_assign_native()`
- it's reasonable to limit the maximim number of inline-asm arguments to 12
(24 bits for `asm_type_sig` divided by 2)
This change helps to reduce frozen code size (and in some cases RAM usage)
in the following cases:
- 64-bit targets
- builds with MICROPY_PY_SYS_SETTRACE enabled
- builds with MICROPY_EMIT_MACHINE_CODE enabled but MICROPY_EMIT_INLINE_ASM
disabled
With this change, unix 64-bit builds are -4080 bytes in size. Bare-metal
ports like rp2 are unchanged (because mp_raw_code_t is still 32 bytes on
those 32-bit targets).
Signed-off-by: Damien George <damien@micropython.org>
