boards: phytec: add support for phyBOARD-Nash (imx93)

Add basic support for the phyBOARD-Nash, a SBC based on the phyCORE-i.MX93.
Both CPU types (Cortex-A55, Cortex-M33) are supported.

Signed-off-by: Jonas Remmert <j.remmert@phytec.de>

boards/phytec/phyboard_nash/Kconfig.phyboard_nash

@@ -0,0 +1,7 @@
+# Copyright 2024 PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_PHYBOARD_NASH
+	select SOC_MIMX9352_A55 if BOARD_PHYBOARD_NASH_MIMX9352_A55
+	select SOC_MIMX9352_M33 if BOARD_PHYBOARD_NASH_MIMX9352_M33
+	select SOC_PART_NUMBER_MIMX9352CVVXM

boards/phytec/phyboard_nash/board.cmake

@@ -0,0 +1,8 @@
+# Copyright (c) 2024, PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+board_set_debugger_ifnset(jlink)
+board_set_flasher_ifnset(jlink)
+
+board_runner_args(jlink "--device=MIMX9352_M33")
+include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/phytec/phyboard_nash/board.yml

@@ -0,0 +1,6 @@
+board:
+  name: phyboard_nash
+  full_name: phyBOARD-Nash i.MX93
+  vendor: phytec
+  socs:
+  - name: mimx9352

boards/phytec/phyboard_nash/doc/index.rst

@@ -0,0 +1,178 @@
+.. _phyboard_nash:
+
+phyBOARD-Nash i.MX93
+####################
+
+Overview
+********
+
+The phyBOARD-Nash is based on the phyCORE-i.MX93 SoM is based on the NXP i.MX93
+SoC. It features common industrial interfaces and can be used as a reference for
+development or in the final product. It is an entry-level development board,
+which helps developers to get familiar with the module before investing a large
+amount of resources in more specific designs.
+
+i.MX93 MPU is composed of one cluster of 2x Cortex-A55 cores and a single
+Cortex-M33 core. Zephyr OS is ported to run on one of the Cortex-A55 core as
+well as the Cortex-M33 core.
+
+- Memory:
+
+   - RAM: 512 MB - 2GB LPDDR4
+   - EEPROM: 4 kB - 32 kB
+   - eMMC: 8 GB - 256 GB
+
+- Interfaces:
+
+   - Ethernet: 2x 10/100BASE-T (1x TSN Support)
+   - USB: 2x 2.0 Host / OTG
+   - Serial: 1x RS232 / RS485 Full Duplex / Half Duplex
+   - CAN: 1x CAN FD
+   - Digital I/O: via Expansion Connector
+   - MMX/SD/SDIO: microSD slot
+   - Display: LVDS(1x4 or 1x8), MIPI DSI(1x4), HDMI
+   - Audio: SAI
+   - Camera: 1x MIPI CSI-2 (phyCAM-M), 1x Parallel
+   - Expansion Bus: I2C, SPI, SDIO, UART, USB
+
+- Debug:
+
+   - JTAG 10-pin connector
+   - USB-C for UART debug, 2x serial ports for A55 and M33
+
+
+.. image:: img/phyboard_nash.webp
+   :width: 720px
+   :align: center
+   :height: 405px
+   :alt: phyBOARD-Nash
+
+More information about the board can be found at the `PHYTEC website`_.
+
+Supported Features
+==================
+
+The ``phyboard_nash/mimx9352/a55`` board target supports the following hardware
+features:
+
++-----------+------------+-------------------------------------+
+| Interface | Controller | Driver/Component                    |
++===========+============+=====================================+
+| GIC-v4    | on-chip    | interrupt controller                |
++-----------+------------+-------------------------------------+
+| ARM TIMER | on-chip    | system clock                        |
++-----------+------------+-------------------------------------+
+| CLOCK     | on-chip    | clock_control                       |
++-----------+------------+-------------------------------------+
+| PINMUX    | on-chip    | pinmux                              |
++-----------+------------+-------------------------------------+
+| UART      | on-chip    | serial port                         |
++-----------+------------+-------------------------------------+
+| TPM       | on-chip    | TPM Counter                         |
++-----------+------------+-------------------------------------+
+
+The ``phyboard_nash/mimx9352/m33`` board target supports the following hardware
+features:
+
++-----------+------------+-------------------------------------+
+| Interface | Controller | Driver/Component                    |
++===========+============+=====================================+
+| NVIC      | on-chip    | interrupt controller                |
++-----------+------------+-------------------------------------+
+| SYSTICK   | on-chip    | systick                             |
++-----------+------------+-------------------------------------+
+| CLOCK     | on-chip    | clock_control                       |
++-----------+------------+-------------------------------------+
+| PINMUX    | on-chip    | pinmux                              |
++-----------+------------+-------------------------------------+
+| UART      | on-chip    | serial port                         |
++-----------+------------+-------------------------------------+
+
+Devices
+========
+System Clock
+------------
+
+This board configuration uses a system clock frequency of 24 MHz. Cortex-A55
+Core runs up to 1.7 GHz. Cortex-M33 Core runs up to 200MHz in which SYSTICK runs
+on same frequency.
+
+Serial Port
+-----------
+
+This board configuration uses a single serial communication channel with the
+CPU's UART2 for A55 core and M33 core. The u-boot bootloader or Linux use the
+second serial port for debug output.
+
+Programming and Debugging (A55)
+*******************************
+
+Copy the compiled ``zephyr.bin`` to the ``BOOT`` partition of the SD card and
+plug the SD card into the board. Power it up and stop the u-boot execution at
+prompt.
+
+Use U-Boot to load and execute zephyr.bin on Cortex-A55 Core0:
+
+.. code-block:: console
+
+    fatload mmc 1:1 0xd0000000 zephyr.bin; dcache flush; icache flush; dcache off; icache off; go 0xd0000000
+
+
+Use this configuration to run basic Zephyr applications and kernel tests,
+for example:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: phyboard_nash/mimx9352/a55
+   :goals: build
+
+Use this configuration to run basic Zephyr applications, for example:
+
+.. code-block:: console
+
+    *** Booting Zephyr OS build v3.7.0-848-gb4d99b124c6d ***
+    Hello World! phyboard_nash/mimx9352/a55
+
+Programming and Debugging (M33)
+*******************************
+
+Copy the compiled ``zephyr.bin`` to the ``BOOT`` partition of the SD card and
+plug the SD card into the board. Power it up and stop the u-boot execution at
+prompt.
+
+Use U-Boot to load and kick zephyr.bin to Cortex-M33 Core:
+
+.. code-block:: console
+
+    load mmc 1:1 0x80000000 zephyr.bin;cp.b 0x80000000 0x201e0000 0x30000;bootaux 0x1ffe0000 0
+
+Use this configuration to run basic Zephyr applications, for example:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: phyboard_nash/mimx9352/m33
+   :goals: build
+
+This will build an image with the synchronization sample app, boot it and
+display the following console output:
+
+.. code-block:: console
+
+    *** Booting Zephyr OS build v3.7.0-848-gb4d99b124c6d ***
+    Hello World! phyboard_nash/mimx9352/m33
+
+Starting the M7-Core from U-Boot and Linux
+==========================================
+
+Loading binaries and starting the M33-Core is supported from Linux via
+remoteproc. Please check the `phyCORE-i.MX93 BSP Manual`_ for more information.
+
+References
+==========
+
+For more information refer to the `PHYTEC website`_.
+
+.. _PHYTEC website:
+   https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
+.. _phyCORE-i.MX93 BSP Manual:
+   https://phytec.github.io/doc-bsp-yocto/bsp/imx9/imx93/imx93.html

boards/phytec/phyboard_nash/phyboard_nash-pinctrl.dtsi

@@ -0,0 +1,19 @@
+/*
+ * Copyright 2024 PHYTEC Messtechnik GmbH
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <nxp/nxp_imx/mimx9352cvuxk-pinctrl.dtsi>
+
+&pinctrl {
+	uart2_default: uart2_default {
+		group0 {
+			pinmux = <&iomuxc1_uart2_rxd_lpuart_rx_lpuart2_rx>,
+				<&iomuxc1_uart2_txd_lpuart_tx_lpuart2_tx>;
+			bias-pull-up;
+			slew-rate = "slightly_fast";
+			drive-strength = "x5";
+		};
+	};
+};

boards/phytec/phyboard_nash/phyboard_nash_a55.dts

@@ -0,0 +1,40 @@
+/*
+ * Copyright 2022,2024 NXP
+ * Copyright 2024 PHYTEC Messtechnik GmbH
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <nxp/nxp_mimx93_a55.dtsi>
+#include "phyboard_nash-pinctrl.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash i.MX93";
+	compatible = "phytec,phyboard_nash";
+
+	chosen {
+		zephyr,console = &lpuart2;
+		zephyr,shell-uart = &lpuart2;
+		zephyr,sram = &sram0;
+	};
+
+	cpus {
+		cpu@0 {
+			status = "disabled";
+		};
+	};
+
+	sram0: memory@d0000000 {
+		reg = <0xd0000000 DT_SIZE_M(1)>;
+	};
+};
+
+&lpuart2 {
+	status = "okay";
+	current-speed = <115200>;
+	/* clocks = <&ccm IMX_CCM_UART4_CLK 0x6c 24>; */
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+};

boards/phytec/phyboard_nash/phyboard_nash_a55.yaml

@@ -0,0 +1,18 @@
+# Copyright 2024 PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+identifier: phyboard_nash/mimx9352/a55
+name: PHYTEC phyBOARD-Nash i.MX93 A55
+type: mcu
+arch: arm64
+toolchain:
+  - zephyr
+  - cross-compile
+ram: 1024
+supported:
+  - uart
+testing:
+  ignore_tags:
+    - net
+    - bluetooth
+vendor: phytec

boards/phytec/phyboard_nash/phyboard_nash_a55_defconfig

@@ -0,0 +1,24 @@
+# Copyright 2024 PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_CLOCK_CONTROL=y
+CONFIG_SERIAL=y
+CONFIG_UART_CONSOLE=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_CONSOLE=y
+
+# ARM Options
+CONFIG_AARCH64_IMAGE_HEADER=y
+CONFIG_ARMV8_A_NS=y
+
+# MMU Options
+CONFIG_MAX_XLAT_TABLES=64
+
+# Cache Options
+CONFIG_CACHE_MANAGEMENT=y
+CONFIG_DCACHE_LINE_SIZE_DETECT=y
+CONFIG_ICACHE_LINE_SIZE_DETECT=y
+
+# Zephyr Kernel Configuration
+CONFIG_XIP=n
+CONFIG_KERNEL_DIRECT_MAP=y

boards/phytec/phyboard_nash/phyboard_nash_m33.dts

@@ -0,0 +1,31 @@
+/*
+ * Copyright 2024 PHYTEC Messtechnik GmbH
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <nxp/nxp_imx93_m33.dtsi>
+#include "phyboard_nash-pinctrl.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash i.MX93";
+	compatible = "phytec,phyboard_nash";
+
+	chosen {
+		/* TCM */
+		zephyr,flash = &itcm;
+		zephyr,sram = &dtcm;
+
+		zephyr,console = &lpuart2;
+		zephyr,shell-uart = &lpuart2;
+	};
+};
+
+&lpuart2 {
+	status = "okay";
+	current-speed = <115200>;
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+};

boards/phytec/phyboard_nash/phyboard_nash_m33.yaml

@@ -0,0 +1,15 @@
+# Copyright 2024 PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+identifier: phyboard_nash/mimx9352/m33
+name: PHYTEC phyBOARD Nash (i.MX93) M33
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - cross-compile
+ram: 128
+flash: 128
+supported:
+  - uart
+vendor: phytec

boards/phytec/phyboard_nash/phyboard_nash_m33_defconfig

@@ -0,0 +1,9 @@
+# Copyright 2024 PHYTEC Messtechnik GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_CLOCK_CONTROL=y
+CONFIG_SERIAL=y
+CONFIG_UART_CONSOLE=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_CONSOLE=y
+CONFIG_XIP=y