adafruit-mirror/zephyr
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 9

samples: sensors: Remove label property from devicetree overlays

Browse source 
Label properties are not required

Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is contained in:
Kumar Gala 2022-07-15 20:28:47 -05:00 committed by Maureen Helm
parent a97765706a
commit 88021ecd47
54 changed files with 0 additions and 60 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
samples/sensor/adt7420/boards/frdm_k64f.overlay
View file

@ -10,7 +10,6 @@
adt7420@48 {
compatible = "adi,adt7420";
reg = <0x48>;
label = "ADT7420";
int-gpios = <&gpioc 16 GPIO_ACTIVE_LOW>;
};
};

1
samples/sensor/adt7420/boards/nrf52dk_nrf52832.overlay
View file

@ -10,7 +10,6 @@
adt7420@48 {
compatible = "adi,adt7420";
reg = <0x48>;
label = "ADT7420";
int-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};

1
samples/sensor/adxl362/boards/nrf52dk_nrf52832.overlay
View file

@ -32,7 +32,6 @@
adxl362@0 {
compatible = "adi,adxl362";
label = "ADXL362";
spi-max-frequency = <8000000>;
reg = <0>;
int1-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;

1
samples/sensor/adxl372/boards/frdm_k64f.overlay
View file

@ -10,7 +10,6 @@
adxl372@11 {
compatible = "adi,adxl372";
reg = <0x11>;
label = "ADXL372";
int1-gpios = <&gpioc 6 0>;
};
};

1
samples/sensor/adxl372/boards/nrf52dk_nrf52832.overlay
View file

@ -10,7 +10,6 @@
compatible = "adi,adxl372";
reg = <0>;
spi-max-frequency = <8000000>;
label = "ADXL372";
int1-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/ams_iAQcore/iaq_core.overlay
View file

@ -10,6 +10,5 @@
iaqcore: iaqcore@5a {
compatible = "ams,iaqcore";
reg = <0x5a>;
label = "IAQ_CORE";
};
};

1
samples/sensor/bme280/arduino_i2c.overlay
View file

@ -15,6 +15,5 @@
bme280@77 {
compatible = "bosch,bme280";
reg = <0x77>;
label = "BME280_I2C";
};
};

1
samples/sensor/bme280/arduino_spi.overlay
View file

@ -12,7 +12,6 @@
bme280@0 {
compatible = "bosch,bme280";
reg = <0>;
label = "BME280_SPI";
spi-max-frequency = <1000000>; /* conservatively set to 1MHz */
};
};

1
samples/sensor/bme280/boards/adafruit_feather_m0_basic_proto.overlay
View file

@ -10,6 +10,5 @@
/* 0x77 - SDO <-> VCC */
compatible = "bosch,bme280";
reg = <0x76>;
label = "ENVIRONMENTAL_SENSOR";
};
};

1
samples/sensor/bme680/boards/adafruit_feather_nrf52840.overlay
View file

@ -12,6 +12,5 @@
bme680: bme680@77 {
compatible = "bosch,bme680";
reg = <0x77>;
label = "BME680";
};
};

1
samples/sensor/bme680/boards/nrf52840dk_nrf52840.overlay
View file

@ -8,6 +8,5 @@
bme680@76 {
compatible = "bosch,bme680";
reg = <0x76>;
label = "BME680";
};
};

1
samples/sensor/bmg160/boards/frdm_k64f.overlay
View file

@ -9,6 +9,5 @@
compatible = "bosch,bmg160";
reg = <0x68>;
int-gpios = <&gpioc 6 0>;
label = "BMG160";
};
};

1
samples/sensor/bmi270/app.overlay
View file

@ -10,6 +10,5 @@
bmi270@68 {
compatible = "bosch,bmi270";
reg = <0x68>;
label = "BMI270";
};
};

1
samples/sensor/ccs811/boards/nrf51_ble400.overlay
View file

@ -31,7 +31,6 @@
ccs811: ccs811@5b {
compatible = "ams,ccs811";
reg = <0x5b>;
label = "CCS811";
irq-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;

1
samples/sensor/dht/boards/nrf52dk_nrf52832.overlay
View file

@ -8,7 +8,6 @@
dht22 {
compatible = "aosong,dht";
status = "okay";
label = "DHT22";
dio-gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
dht22;
};

1
samples/sensor/dps310/app.overlay
View file

@ -13,6 +13,5 @@
status = "okay";
compatible = "infineon,dps310";
reg = <0x77>;
label = "DPS310";
};
};

2
samples/sensor/ds18b20/arduino_serial.overlay
View file

@ -16,14 +16,12 @@
compatible = "zephyr,w1-serial";
#address-cells = <1>;
#size-cells = <0>;
label = "W1_0";
status = "okay";
ds18b20 {
compatible = "maxim,ds18b20";
family-code = <0x28>;
resolution = <12>;
label = "DS18B20";
status = "okay";
};
};

2
samples/sensor/ds18b20/boards/serial_overlay.dtsi
View file

@ -11,14 +11,12 @@
compatible = "zephyr,w1-serial";
#address-cells = <1>;
#size-cells = <0>;
label = "W1_0";
status = "okay";
ds18b20 {
compatible = "maxim,ds18b20";
family-code = <0x28>;
resolution = <12>;
label = "DS18B20";
status = "okay";
};
};

1
samples/sensor/ens210/ens210.overlay
View file

@ -10,6 +10,5 @@
ens210: ens210@43 {
compatible = "ams,ens210";
reg = <0x43>;
label = "ENS210";
};
};

1
samples/sensor/fdc2x1x/boards/nrf9160dk_nrf9160.overlay
View file

@ -9,7 +9,6 @@
fdc2x1x@2A {
compatible = "ti,fdc2x1x";
reg = <0x2A>;
label = "FDC2X1X";
sd-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
intb-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;

1
samples/sensor/grove_light/boards/nrf52dk_nrf52832.overlay
View file

@ -6,7 +6,6 @@
/ {
ntc {
label = "GLS";
compatible = "seeed,grove-light";
io-channels = <&arduino_adc 0>;
};

1
samples/sensor/grove_temperature/boards/nrf52dk_nrf52832.overlay
View file

@ -6,7 +6,6 @@
/ {
ntc {
label = "GTS";
compatible = "seeed,grove-temperature";
io-channels = <&arduino_adc 0>;
};

1
samples/sensor/icm42605/boards/nrf52dk_nrf52832.overlay
View file

@ -34,7 +34,6 @@
compatible = "invensense,icm42605";
spi-max-frequency = <24000000>;
reg = <0>;
label = "ICM42605";
int-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
};

2
samples/sensor/ina219/boards/blackpill_f411ce.overlay
View file

@ -8,13 +8,11 @@
status = "okay";
compatible = "st,stm32-i2c-v1";
clock-frequency = <I2C_BITRATE_FAST>;
label = "I2C_0";
ina219@40 {
status = "okay";
compatible = "ti,ina219";
reg = <0x40>;
label = "INA219";
brng = <0>;
pg = <0>;
sadc = <13>;

1
samples/sensor/isl29035/boards/nrf52dk_nrf52832.overlay
View file

@ -8,7 +8,6 @@
isl29035@44 {
compatible = "isil,isl29035";
reg = <0x44>;
label = "ISL29035";
int-gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
};
};

1
samples/sensor/max17262/app.overlay
View file

@ -9,7 +9,6 @@
max17262@36 {
compatible = "maxim,max17262";
label = "MAX17262";
reg = <0x36>;
design-voltage = <3600>;
desired-voltage = <3600>;

1
samples/sensor/max44009/boards/frdm_k64f.overlay
View file

@ -9,6 +9,5 @@
compatible = "maxim,max44009";
reg = <0x4a>;
int-gpios = <&gpioc 6 0>;
label = "MAX44009";
};
};

1
samples/sensor/max6675/boards/nucleo_f030r8.overlay
View file

@ -9,6 +9,5 @@
compatible = "maxim,max6675";
reg = <0>;
spi-max-frequency = <4300000>;
label = "MAX6675";
};
};

1
samples/sensor/mcp9808/boards/frdm_k64f.overlay
View file

@ -9,6 +9,5 @@
compatible = "microchip,mcp9808";
reg = <0x18>;
int-gpios = <&gpioc 16 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "MCP9808";
};
};

1
samples/sensor/mcp9808/boards/nucleo_l031k6.overlay
View file

@ -10,6 +10,5 @@
reg = <0x18>;
int-gpios = <&gpiob 4 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
resolution = <3>;
label = "MCP9808";
};
};

1
samples/sensor/mcp9808/boards/nucleo_l053r8.overlay
View file

@ -9,7 +9,6 @@
compatible = "microchip,mcp9808";
reg = <0x18>;
int-gpios = <&gpioa 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "MCP9808";
resolution = <3>;
};
};

1
samples/sensor/mcp9808/boards/particle_xenon.overlay
View file

@ -9,6 +9,5 @@
compatible = "microchip,mcp9808";
reg = <0x18>;
int-gpios = <&gpio1 1 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "MCP9808";
};
};

1
samples/sensor/mhz19b/boards/nucleo_g0b1re.overlay
View file

@ -10,6 +10,5 @@
compatible = "winsen,mhz19b";
maximum-range = <10000>;
abc-on;
label = "MHZ19B_2";
};
};

1
samples/sensor/mpr/boards/arduino_due.overlay
View file

@ -8,6 +8,5 @@
mpr@18 {
compatible = "honeywell,mpr";
reg = <0x18>;
label = "MPR";
};
};

1
samples/sensor/mpu6050/boards/nrf52dk_nrf52832.overlay
View file

@ -9,7 +9,6 @@
compatible = "invensense,mpu6050";
reg = <0x68>;
status = "okay";
label = "MPU6050";
int-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/ms5837/boards/nrf52840dk_nrf52840.overlay
View file

@ -10,6 +10,5 @@
ms5837@76 {
compatible = "meas,ms5837";
reg = <0x76>;
label = "MS5837";
};
};

2
samples/sensor/sgp40_sht4x/boards/blackpill_f411ce.overlay
View file

@ -11,14 +11,12 @@
status = "okay";
compatible = "sensirion,sht4x";
reg = <0x44>;
label = "SHT4X";
repeatability = <2>;
};
sgp40@59 {
status = "okay";
compatible = "sensirion,sgp40";
reg = <0x59>;
label = "SGP40";
enable-selftest;
};
};

1
samples/sensor/sht3xd/boards/efr32mg_sltb004a.overlay
View file

@ -8,7 +8,6 @@
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
alert-gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/sht3xd/boards/frdm_k64f.overlay
View file

@ -8,7 +8,6 @@
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
alert-gpios = <&gpioe 26 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/sht3xd/boards/nrf51_ble400.overlay
View file

@ -8,7 +8,6 @@
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
alert-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/sht3xd/boards/nrf52840dk_nrf52840.overlay
View file

@ -8,7 +8,6 @@
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
alert-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/sht3xd/boards/nucleo_l476rg.overlay
View file

@ -9,7 +9,6 @@
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
alert-gpios = <&gpioa 9 GPIO_ACTIVE_HIGH>;
};
};

1
samples/sensor/stm32_temp_sensor/boards/nucleo_f401re.overlay
View file

@ -8,7 +8,6 @@
/ {
stm-temp {
label = "DIE_TEMP";
compatible = "st,stm32-temp";
io-channels = <&adc1 16>;
status = "okay";

1
samples/sensor/stm32_temp_sensor/boards/stm32f103_mini.overlay
View file

@ -8,7 +8,6 @@
/ {
stm-temp {
label = "DIE_TEMP";
compatible = "st,stm32-temp";
io-channels = <&adc1 16>;
avgslope = <43>;

1
samples/sensor/stm32_vbat_sensor/README.rst
View file

@ -20,7 +20,6 @@ board DT file or with a board overlay in the samples/sensor/stm32_temp_sensor/bo
stm32_vbat: stm32vbat {
compatible = "st,stm32-vbat";
label = "VBAT";
io-channels = <&adc1 14>;
ratio = <3>;
status = "okay";

1
samples/sensor/stm32_vbat_sensor/boards/nucleo_g071rb.overlay
View file

@ -12,6 +12,5 @@
ratio = <3>;
io-channels = <&adc1 14>;
status = "okay";
label = "VBAT";
};
};

1
samples/sensor/stm32_vbat_sensor/boards/nucleo_wb55rg.overlay
View file

@ -12,7 +12,6 @@
ratio = <3>;
io-channels = <&adc1 18>;
status = "okay";
label = "VBAT";
};
};

1
samples/sensor/sx9500/boards/frdm_k64f.overlay
View file

@ -9,6 +9,5 @@
compatible = "semtech,sx9500";
reg = <0x28>;
int-gpios = <&gpioc 6 GPIO_ACTIVE_LOW>;
label = "SX9500";
};
};

2
samples/sensor/th02/boards/frdm_k64f.overlay
View file

@ -8,12 +8,10 @@
th02@40 {
compatible = "hoperf,th02";
reg = <0x40>;
label = "TH02";
};
glcd: glcd@3e {
compatible = "seeed,grove-lcd-rgb";
label = "GLCD";
reg = <0x3e>;
};
};

1
samples/sensor/ti_hdc/boards/nucleo_l496zg.overlay
View file

@ -9,7 +9,6 @@
ti_hdc: ti_hdc@40 {
compatible = "ti,hdc","ti,hdc1080";
reg = <0x40>;
label = "HDC1080";
};
};

1
samples/sensor/tmp112/boards/frdm_k64f.overlay
View file

@ -8,6 +8,5 @@
tmp112@4a {
compatible = "ti,tmp112";
reg = <0x4a>;
label = "TMP112";
};
};

2
samples/sensor/tmp116/boards/nucleo_f401re.overlay
View file

@ -9,14 +9,12 @@
ti_tmp116: ti_tmp116@4b {
compatible = "ti,tmp116";
reg = <0x4B>;
label = "TMP116";
#address-cells = <1>;
#size-cells = <0>;
eeprom: ti_tmp116_eeprom@0 {
compatible = "ti,tmp116-eeprom";
reg = <0x0>;
label = "TMP116_EEPROM";
read-only;
};
};

1
samples/sensor/vcnl4040/boards/adafruit_feather_stm32f405.overlay
View file

@ -8,7 +8,6 @@
vcnl4040@60 {
compatible = "vishay,vcnl4040";
reg = <0x60>;
label = "VCNL4040";
int-gpios = <&feather_header 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
led-current = <200>;
led-duty-cycle = <320>;

1
samples/sensor/wsen_itds/boards/disco_l475_iot1.overlay
View file

@ -8,7 +8,6 @@
itds@18 {
compatible = "we,wsen-itds";
reg = <0x18>;
label = "WSEN-ITDS";
int-gpios = <&gpiob 2 GPIO_ACTIVE_HIGH>;
odr = "800";
op-mode = "high-perf";