boards: Introduce Google Quincy Development Board

Quincy is a board created by Google for fingerprint-related
functionality development.

Signed-off-by: David Cross <davidcross@chromium.org>

boards/google/quincy/Kconfig.google_quincy

@@ -0,0 +1,5 @@
+# Copyright (c) 2024 Google LLC
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_GOOGLE_QUINCY
+	select SOC_NPCX9MFP

boards/google/quincy/board.cmake

@@ -0,0 +1,9 @@
+# Copyright (c) 2024 Google LLC
+# SPDX-License-Identifier: Apache-2.0
+
+board_runner_args(jlink "--device=Cortex-M4" "--speed=4000")
+board_runner_args(openocd --cmd-load "npcx_write_image")
+board_runner_args(openocd --cmd-verify "npcx_verify_image")
+
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/google/quincy/board.yml

@@ -0,0 +1,6 @@
+board:
+  name: google_quincy
+  full_name: Quincy
+  vendor: google
+  socs:
+    - name: npcx9mfp

boards/google/quincy/doc/index.rst

@@ -0,0 +1,47 @@
+.. zephyr:board:: google_quincy
+
+Overview
+********
+
+Google Quincy is a board created for fingerprint-related functionality
+development.
+
+The board has connectors for fingerprint sensors. A UART Console is exposed
+over μServo and USB connectors. The MCU can be flashed using μServo or SWD.
+
+Hardware
+********
+
+- NPCX99FPA0BX VFBGA144 package
+
+Peripheral Mapping
+===================
+
+- UART_1 (CONSOLE) TX/RX : GPIO65/GPIO64
+- UART_2 (PROG) TX/RX : GPIO86/GPIO75
+- SPI_0 (SHI) CS/CLK/MISO/MOSI : GPIO53/GPIO55/GPIO47/GPIO46
+- SPI_1 (SPIP) CS/CLK/MISO/MOSI : GPIOA6/GPIOA1/GPIO95/GPIOA3
+- SPI_2 (GP) CS/CLK/MISO/MOSI : GPIO30/GPIO25/GPIO24/GPIO31
+
+Programming and Debugging
+*************************
+
+Build application as usual for the ``google_quincy`` board target, and flash
+using μServo or an external J-Link connected to J4. If μServo is used, please
+follow the `Chromium EC Flashing Documentation`_ and
+`Chromium Servo Micro Documentation`_.
+
+Debugging
+=========
+
+Use SWD with a J-Link.
+
+References
+**********
+
+.. target-notes::
+
+.. _Chromium EC Flashing Documentation:
+   https://chromium.googlesource.com/chromiumos/platform/ec#Flashing-via-the-servo-debug-board
+.. _Chromium Servo Micro Documentation:
+   https://chromium.googlesource.com/chromiumos/third_party/hdctools/+/master/docs/servo_micro.md

boards/google/quincy/google_quincy.dts

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2024 Google LLC
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <nuvoton/npcx9mfp.dtsi>
+#include <nuvoton/npcx/npcx9/npcx9-pinctrl.dtsi>
+
+/ {
+	model = "Google Quincy development board";
+	compatible = "google,quincy-fpmcu";
+
+	chosen {
+		zephyr,console = &uart1;
+		zephyr,shell-uart = &uart1;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+		zephyr,flash-controller = &int_flash;
+	};
+
+	aliases {
+		/* For watchdog sample */
+		watchdog0 = &twd0;
+	};
+};
+
+/* UART1: Servo UART (console) */
+&uart1 {
+	/* Use UART1_SL2 ie. PIN64.65 */
+	pinctrl-0 = <&uart1_2_sin_gp64
+		     &uart1_2_sout_gp65>;
+	pinctrl-names = "default";
+	current-speed = <115200>;
+	status = "okay";
+};
+
+/* UART2: AP UART (Host Commands and MKBP) */
+&uart2 {
+	pinctrl-0 = <&uart2_sin_gp75
+		     &uart2_sout_gp86>;
+	pinctrl-names = "default";
+	current-speed = <115200>;
+	status = "okay";
+};
+
+/* SHI0: communication with the AP */
+&shi0 {
+	status = "okay";
+	pinctrl-0 = <&shi_gp46_47_53_55>;
+	pinctrl-names = "default";
+};
+
+/* SPIP0: communication with the fingerprint sensor */
+&spip0 {
+	pinctrl-0 = <&spip_sclk_mosi_miso_gp95_gpa1_gpa3_gpa5_sl
+		     &spip_sclk_mosi_miso_gp95_gpa1_gpa3_gpa5_no_spip_inv>;
+	cs-gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	status = "okay";
+};

boards/google/quincy/google_quincy.yaml

@@ -0,0 +1,19 @@
+identifier: google_quincy
+name: Google Quincy Development Board
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+ram: 512
+flash: 1024
+vendor: google
+supported:
+  - clock
+  - gpio
+  - i2c
+  - pm
+  - pwm
+  - spi
+  - uart
+  - watchdog

boards/google/quincy/google_quincy_defconfig

@@ -0,0 +1,23 @@
+# Copyright (c) 2024 Google Inc
+# SPDX-License-Identifier: Apache-2.0
+
+# General Kernel Options
+CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=15000000
+
+# Serial Drivers
+CONFIG_SERIAL=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+
+# Console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+
+# GPIO Controller
+CONFIG_GPIO=y
+
+# Clock Controller
+CONFIG_CLOCK_CONTROL=y
+
+# Enable MPU and HW stack protection
+CONFIG_ARM_MPU=y
+CONFIG_HW_STACK_PROTECTION=y