adafruit-mirror/zephyr
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 8

uart_mcux_lpuart: LPFlexcomm inst based determine

Browse source 
Since some platforms may have some lpuart that are wrapped in lpflexcomm
and some that are not, then change the init code to determine how to
connect the interrupt on an instance basis.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This commit is contained in:
Declan Snyder 2025-01-14 11:05:37 -06:00 committed by Benjamin Cabé
parent 4f9eda6981
commit d02c48ee8d
1 changed files with 18 additions and 24 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

42
drivers/serial/uart_mcux_lpuart.c
View file

@ -19,6 +19,7 @@
#include <zephyr/drivers/dma.h>
#endif
#include <zephyr/logging/log.h>
#include <zephyr/sys/util_macro.h>
#include <fsl_lpuart.h>
#if CONFIG_NXP_LP_FLEXCOMM
@ -47,9 +48,6 @@ struct lpuart_dma_config {
struct mcux_lpuart_config {
LPUART_Type *base;
#ifdef CONFIG_NXP_LP_FLEXCOMM
const struct device *parent_dev;
#endif
const struct device *clock_dev;
const struct pinctrl_dev_config *pincfg;
clock_control_subsys_t clock_subsys;
@ -1211,20 +1209,12 @@ static int mcux_lpuart_init(const struct device *dev)
}
#ifdef CONFIG_UART_MCUX_LPUART_ISR_SUPPORT
#if CONFIG_NXP_LP_FLEXCOMM
/* When using LP Flexcomm driver, register the interrupt handler
* so we receive notification from the LP Flexcomm interrupt handler.
*/
nxp_lp_flexcomm_setirqhandler(config->parent_dev, dev,
LP_FLEXCOMM_PERIPH_LPUART, mcux_lpuart_isr);
#else
/* Interrupt is managed by this driver */
config->irq_config_func(dev);
#endif
#ifdef CONFIG_UART_EXCLUSIVE_API_CALLBACKS
data->api_type = LPUART_NONE;
#endif
#endif
#ifdef CONFIG_PM
data->pm_state_lock_on = false;
@ -1279,15 +1269,26 @@ static DEVICE_API(uart, mcux_lpuart_driver_api) = {
\
irq_enable(DT_INST_IRQ_BY_IDX(n, i, irq)); \
} while (false)
#define MCUX_LPUART_IRQS_INSTALL(n) \
IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), \
(MCUX_LPUART_IRQ_INSTALL(n, 0);)) \
IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 1), \
(MCUX_LPUART_IRQ_INSTALL(n, 1);))
/* When using LP Flexcomm driver, register the interrupt handler
* so we receive notification from the LP Flexcomm interrupt handler.
*/
#define MCUX_LPUART_LPFLEXCOMM_IRQ_CONFIG(n) \
nxp_lp_flexcomm_setirqhandler(DEVICE_DT_GET(DT_INST_PARENT(n)), \
DEVICE_DT_INST_GET(n), \
LP_FLEXCOMM_PERIPH_LPUART, \
mcux_lpuart_isr)
#define MCUX_LPUART_IRQ_INIT(n) .irq_config_func = mcux_lpuart_config_func_##n,
#define MCUX_LPUART_IRQ_DEFINE(n) \
static void mcux_lpuart_config_func_##n(const struct device *dev) \
{ \
IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), \
(MCUX_LPUART_IRQ_INSTALL(n, 0);)) \
\
IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 1), \
(MCUX_LPUART_IRQ_INSTALL(n, 1);)) \
COND_CODE_1(DT_NODE_HAS_COMPAT(DT_INST_PARENT(n), nxp_lp_flexcomm), \
(MCUX_LPUART_LPFLEXCOMM_IRQ_CONFIG(n)), \
(MCUX_LPUART_IRQS_INSTALL(n))); \
}
#else
#define MCUX_LPUART_IRQ_INIT(n)
@ -1353,17 +1354,10 @@ static DEVICE_API(uart, mcux_lpuart_driver_api) = {
: DT_INST_PROP(n, nxp_rs485_mode)\
? UART_CFG_FLOW_CTRL_RS485 \
: UART_CFG_FLOW_CTRL_NONE
#ifdef CONFIG_NXP_LP_FLEXCOMM
#define PARENT_DEV(n) \
.parent_dev = DEVICE_DT_GET(DT_INST_PARENT(n)),
#else
#define PARENT_DEV(n)
#endif /* CONFIG_NXP_LP_FLEXCOMM */
#define LPUART_MCUX_DECLARE_CFG(n) \
static const struct mcux_lpuart_config mcux_lpuart_##n##_config = { \
.base = (LPUART_Type *) DT_INST_REG_ADDR(n), \
PARENT_DEV(n) \
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \
.clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(n, name), \
.baud_rate = DT_INST_PROP(n, current_speed), \