boards: silabs: xg24_dk2601b: Add SPI NOR flash
Add definition of MX25R SPI flash to device tree. Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This commit is contained in:
Aksel Skauge Mellbye
Benjamin Cabé
parent
ea191bddaf
commit
e35cb93afa
3 changed files with 97 additions and 44 deletions
|
|
@ -17,7 +17,7 @@ Hardware
|
|||
- Transmit power: up to +20 dBm
|
||||
- Operation frequency: 2.4 GHz
|
||||
- Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz).
|
||||
- On board sensors:
|
||||
- On board devices:
|
||||
|
||||
- Silicon Labs Si7021 relative humidity & temperature sensor
|
||||
- Silicon Labs Si7210 hall effect sensor
|
||||
|
|
@ -25,6 +25,7 @@ Hardware
|
|||
- TDK InvenSense ICM-20689 6-axis inertial measurement sensor
|
||||
- Vishay VEML6035 ambient light sensor
|
||||
- Bosch BMP384 pressure sensor with internal temperature sensor
|
||||
- MX25R3235F 32 Mbit SPI data flash
|
||||
|
||||
For more information about the EFR32MG24 SoC and BRD2601B board, refer to these
|
||||
documents:
|
||||
|
|
@ -39,33 +40,35 @@ Supported Features
|
|||
|
||||
The board configuration supports the following hardware features:
|
||||
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
| Interface | Controller | Driver/Component |
|
||||
+===========+============+=====================================+
|
||||
+===========+============+====================================+
|
||||
| MPU | on-chip | memory protection unit |
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
| NVIC | on-chip | nested vector interrupt controller |
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
| SYSTICK | on-chip | systick |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| COUNTER | on-chip | stimer |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| FLASH | on-chip | flash memory |
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
| SYSRTC | on-chip | counter, timer |
|
||||
+-----------+------------+------------------------------------+
|
||||
| MSC | on-chip | flash memory |
|
||||
+-----------+------------+------------------------------------+
|
||||
| GPIO | on-chip | gpio |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| UART | on-chip | serial |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| DMA | on-chip | ldma |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| TRNG | on-chip | semailbox |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| WATCHDOG | on-chip | watchdog |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| I2C(M/S) | on-chip | i2c |
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
| EUSART | on-chip | serial, spi |
|
||||
+-----------+------------+------------------------------------+
|
||||
| USART | on-chip | serial, spi |
|
||||
+-----------+------------+------------------------------------+
|
||||
| LDMA | on-chip | dma |
|
||||
+-----------+------------+------------------------------------+
|
||||
| SE | on-chip | entropy |
|
||||
+-----------+------------+------------------------------------+
|
||||
| WDOG | on-chip | watchdog |
|
||||
+-----------+------------+------------------------------------+
|
||||
| I2C | on-chip | i2c |
|
||||
+-----------+------------+------------------------------------+
|
||||
| RADIO | on-chip | bluetooth |
|
||||
+-----------+------------+-------------------------------------+
|
||||
+-----------+------------+------------------------------------+
|
||||
|
||||
Other hardware features are currently not supported by the port.
|
||||
|
||||
|
|
@ -73,23 +76,37 @@ Connections and IOs
|
|||
===================
|
||||
|
||||
In the following table, the column **Name** contains Pin names. For example, PA2
|
||||
means Pin number 2 on PORTA, as used in the board's datasheets and manuals.
|
||||
means Pin number 2 on Port A, as used in the board's datasheets and manuals.
|
||||
|
||||
+-------+-------------+-------------------------------------+
|
||||
+------+--------------+---------------------+
|
||||
| Name | Function | Usage |
|
||||
+=======+=============+=====================================+
|
||||
+======+==============+=====================+
|
||||
| PA4 | GPIO | LED0 |
|
||||
+-------+-------------+-------------------------------------+
|
||||
+------+--------------+---------------------+
|
||||
| PB0 | GPIO | LED1 |
|
||||
+-------+-------------+-------------------------------------+
|
||||
+------+--------------+---------------------+
|
||||
| PD2 | GPIO | LED2 |
|
||||
+------+--------------+---------------------+
|
||||
| PB2 | GPIO | Push Button 0 |
|
||||
+-------+-------------+-------------------------------------+
|
||||
+------+--------------+---------------------+
|
||||
| PB3 | GPIO | Push Button 1 |
|
||||
+-------+-------------+-------------------------------------+
|
||||
| PA5 | USART0_TX | UART Console VCOM_TX US0_TX |
|
||||
+-------+-------------+-------------------------------------+
|
||||
| PA6 | USART0_RX | UART Console VCOM_RX US0_RX |
|
||||
+-------+-------------+-------------------------------------+
|
||||
+------+--------------+---------------------+
|
||||
| PA5 | USART0_TX | UART Console |
|
||||
+------+--------------+---------------------+
|
||||
| PA6 | USART0_RX | UART Console |
|
||||
+------+--------------+---------------------+
|
||||
| PC3 | EUSART1_TX | SPI bus: flash, IMU |
|
||||
+------+--------------+---------------------+
|
||||
| PC2 | EUSART1_RX | SPI bus: flash, IMU |
|
||||
+------+--------------+---------------------+
|
||||
| PC1 | EUSART1_SCLK | SPI bus: flash, IMU |
|
||||
+------+--------------+---------------------+
|
||||
| PC0 | EUSART1_CS | SPI bus: flash |
|
||||
+------+--------------+---------------------+
|
||||
| PC4 | I2C0_SCL | I2C bus |
|
||||
+------+--------------+---------------------+
|
||||
| PC5 | I2C0_SDA | I2C bus |
|
||||
+------+--------------+---------------------+
|
||||
|
||||
The default configuration can be found in
|
||||
:zephyr_file:`boards/silabs/dev_kits/xg24_dk2601b/xg24_dk2601b_defconfig`
|
||||
|
|
|
|||
|
|
@ -20,6 +20,19 @@
|
|||
};
|
||||
};
|
||||
|
||||
eusart1_default: eusart1_default {
|
||||
group0 {
|
||||
pins = <EUSART1_TX_PC3>, <EUSART1_SCLK_PC1>;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
};
|
||||
group1 {
|
||||
pins = <EUSART1_RX_PC2>;
|
||||
input-enable;
|
||||
silabs,input-filter;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_default: i2c0_default {
|
||||
group0 {
|
||||
pins = <I2C0_SCL_PC4>, <I2C0_SDA_PC5>;
|
||||
|
|
|
|||
|
|
@ -124,6 +124,29 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&eusart1 {
|
||||
compatible = "silabs,eusart-spi";
|
||||
pinctrl-0 = <&eusart1_default>;
|
||||
pinctrl-names = "default";
|
||||
cs-gpios = <&gpioc 0 GPIO_ACTIVE_LOW>;
|
||||
clock-frequency = <4000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
mx25r32: mx25r3235f@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
size = <0x2000000>;
|
||||
jedec-id = [c2 28 16];
|
||||
has-dpd;
|
||||
dpd-wakeup-sequence = <30000 20 35000>;
|
||||
mxicy,mx25r-power-mode = "low-power";
|
||||
zephyr,pm-device-runtime-auto;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_default>;
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
Loading…
Reference in a new issue