This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Enabling `CONFIG_INPUT_FT5336_INTERRUPT` if the ft5336 node in DT
has `int-gpios` property.
As a result of this change, some boards can eliminate lines that
explicitly configure `CONFIG_INPUT_FT5336_INTERRUPT`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Creation of the new zephyr\soc\nxp\common\nxp_nbu.c driver which manage
the interruption of the NBU. This modification is mandatory to support a
coex application which includes Bluetooth and 802.15.4 on the same
narrow band path.
Signed-off-by: Xavier Razavet <xavier.razavet@nxp.com>
- Adds 'supported: flash' to all NXP board .yaml
with enabled flash controller support.
- Sorts supported features alphabetically.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The NXP LCDIC peripheral contains two internal timers, with configurable
periods. These times are used to determine delays within the peripheral,
such as the reset and tearing enable signal delays. Allow these periods
to be set within the devicetree for the peripheral.
Raise the period where required for display drivers that need a value
other than the reset setting
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Current code does no longer support
the non monolithic feature.
Hence, removing unnecessary code.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This adds zephyr,touch property to boards with touch controllers, analogous
to `zephyr,display`.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Fixes MCUBoot Serial Recovery compilation error
"Serial recovery/USB DFU button must be declared
in device tree as 'mcuboot_button0'"
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add documentation about supported displays on this board, as the list is
getting rather long and each display has its own bespoke connection
requirements.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable the rd_rw612_bga board with the LCD_PAR_S035 shield. This shield
cannot be connected directly to the board, but the connection can be
made with a set of jumper wires.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds "chosen,uart-mcumgr" for nxp boards that support
the secondary bootloader partitioning.
Fixes the subsys\mgmt\mcumgr\smp_svr sample.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Remove the logic from the board level about overriding the
flash load size and instead just select to use the DT code
partition if app is not expected to be able to occupy the
whole flash space because of the firmware image being
loaded separately.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Enable ethernet on the NXP board RD_RW612_BGA.
This requires a variant because it requires a board rework,
which will disable some other features. The variant allows
us to use an overlay to represent this.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Move compatible property and model to dtsi file
of rd_rw612_bga board since it will be the same
for all variants.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When building with monolithic feature enabled, the firmwares binaries
will be linked during the build with the application. This means we can
remove the application size limit due to the firmware storage in flash
not useful anymore.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
- Add pinctrl for flexcomm0 in usart mode
needed for BLE tester application
- Reserve the firmware storage partition
- Mark HCI as a wakeup source
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Add support for the goworld 16880 display module. As this display module
only features an FFC cable, it is added as a board overlay for the RW612
BGA. This module uses an ST7796S display controller as well as an FT7401
touch controller (which is managed by the FT5336 input driver)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for IS66WVQ8M quadspi PSRAM on the RW612 BGA board, and
update board pin control to enable muxing PSRAM pins on the FlexSPI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for USBOTG on RW612 BGA board. This support was tested with
the USB console sample, as well as the USB DFU sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable support for LCDIC on rd_rw612_bga. This support also enables
acceleration features such as DMA for LVGL, to improve performance
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable CTimer0 and MRT0 channel 0 by default on the board,
and add more of the device instances in the counter api test overlay.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Enable support for the mx25u51245g flash chip present on the
RD RW612 BGA. Support has been verified with the following samples:
- samples/drivers/flash_shell
- tests/drivers/flash/common
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
