Allow CTS line to determine UART shutdown for any sleep mode.
This allows lower average current consumption for LITE
HIBERNATE mode.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Do not query SIM card parameters if the SIM
card is not present.
This shortens the driver initialization time
significantly if a SIM card is not present.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
The response of a KTCPSND has two phases. According to documentation by
wireless the timeout is 60 seconds. The fix respects the timeout on the
second phase, too (waiting for OK or errors from modem). Previously only
the first phase used 60 seconds and the second phase used 5 seconds.
Without this fix the hl7800 will lock the tcp stack for the current
socket indefinitely if another socket operation is performed before the
response from the modem is received.
Additionally all timeouts are adjusted to be at least one second longer
as the documented timeout from wireless. This avoids races between the
hl7800 and the driver.
Signed-off-by: Rene Bredlau <git@unrelated.de>
Use CTS input to monitor HL7800 sleep state
when in SLEEP mode.
When CTS is high, shutdown the UART to
save power.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When sleep modes are used, configure sockets
to restore on boot. Letting the HL7800 manage
this means the driver does not have to do it.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Only TCP sockets should send a NULL packet
if the server closes the connection or there
is a socket error.
UDP sockets do not need to do this because
they are connectionless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The previous bf68b67 commit incorrectly passes minfo.mdm_rssi
value to the modem context data_rssi member during the driver
initialization which causes the `modem info` shell command
to return 0 as RSSI value. Fix that by changing data_rssi
modem ctx member to a pointer that is assigned to the RSSI
variable stored within the modem driver context structure.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
When creating a socket, be sure to check the address
family and set the correct address family option in
the AT command.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
The interrupt config flags for an IO should be separate
from the standard IO configs because the interrupt config
is a separate API.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure the GPRS connection APN settings match the PDP
context. This it best to ensure proper IP connectivity.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure that the IP family is synchronized between the PDP
context and the GPRS connection.
There were cases where they could get out of sync.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Assign the IPv6 address from the LTE network to the
network iface.
Configure DNS resolver with IPv6 DNS address from the
LTE network.
Fix socket AT commands to account for IPv6 addresses.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In the DNS work callback ensure the iface is up
(on the LTE network) before trying to reconfigure the
DNS resolver with the DNS address.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow application control for starting modem driver.
This allows network attach to be randomized.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
For low power operation, set the IP connection reconfig
flag when receiving a startup report.
This will ensure the GPRS connection is reconfigured
before any socket operations take place.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow the driver to run if a SIM card is not present.
This allows public HL7800 APIs like firmware updates
to be used even if no network is available.
Remove duplicate query ICCID command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
bugfix: NULL termination is required by
dns_resolve_reconfigure API so null terminate the DNS
server list.
Fix checkpatch warning.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
net_buf_skipcrlf() will remove all \r\n characters from the buffer.
If the data after CONNECT\r\n contained \r or \n it would
be removed, resulting in dropped data.
Fix this to only remove two bytes to ensure data is not dropped.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Change socket RX trailer (EOF) missing to warning and
keep socket RX data instead of discarding.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
According to the documentation the OFF state has to be used when the
devices is fully turned off, ie, power removed. Most drivers were using
a sort of fall-through for all non-active states, leading to behaviors
not following the specifications.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The reboot option of the +KSRAT command is only
supported by newer firmware.
Add a check to determine what version of the command
to use when setting the RAT.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
The default behavior of the +KSRAT= command has
changed to not reboot the HL7800.
Adjust the command so the reboot takes place properly.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
If the modem drivers are built on a 64-bit platform we get errors with
the logging code due to use of size_t. Update to use %zX to handle this
correctly between 32-bit and 64-bit platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If modem receives an IPv6 address, buffer overrun
would occur. Fix this by checking string length to
ensure what type of IP address needs to be parsed.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added (void) cast to supress coverity report. The usage of K_FOREVER
tells me we're not interested in the returned value.
Coverity-CID: 219653
Fixes#33034
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is no reason to clenaup members of net_context structure, as those
should be (and are) managed by net_context_put() implementation.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are cases where the socket would not be closed.
offload_put function will now always close the socket
properly.
Remove error log messages as they are redundant.
on_cmd_sock_error_code handles printing errors.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the
normal handling of IP packets, and instead uses a socket-like
UART interface to handle incoming and outgoing data via AT commands.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
