Make it easier to add TF-M in an app by selecting and implying the
necessary configs so the app doesn't have to specify the configs itself.
Remove unneeded configs from the prj.conf files in the tfm samples.
Also, fix case in key file name.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Refactors the i.mx rt soc series to enable device configuration data
(DCD) by default when the smart external memory controller (SEMC) is
present. This is in preparation for removing the DATA_LOCATION Kconfig
symbol and using a device tree chosen node instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Update the default paths to private keys used
for signing the Secure and the Non-Secure firmware,
when building Zephyr together with TF-M. The update
is done to match the default configuration in
the upstream TF-M project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.03.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/5
(merged as b52fdbf4b62439be9fab9bb4bae9690a42d2fb14)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add initial support for LoRaWAN based on Semtech's loramac-node
library. Current implementation only supports OTAA config and
sending data to LoRaWAN server like ThingsNetwork.
While at it, this commit also moves the "loramac-node" library
definition from drivers/lora to subsys/lorawan. This is required
because, subsys/lorawan gets processed before drivers/lora and
that creates issue while building.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
The HAS_NRFX Kconfig option is selected also for the nrf52_bsim board,
where the nrfx drivers are compiled for a simulated target, without
CMSIS. Thus, selecting HAS_CMSIS_CORE in such case is inappropriate.
This patch removes then the selection of the HAS_CMSIS_CORE option from
HAS_NRFX. When the nrfx drivers are built for a real SoC, where CMSIS
is actually used, the option will get selected by the CPU_CORTEX_M one.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When we build Zephyr for a Non-Secure image, using TFM
as the Secure counterpart, we may or may not use BL2 (e.g.
MCUboot in TFM). If we build with BL2 we need to account
for a ROM offset before the start of the non-secure image
where TFM BL2 expects the BL2 header. This offset is not
needed when TFM is built without BL2. We use the existing
Kconfig options to determine whether we need a ROM offset
or not. We use the value of 0x400 for the BL2 header,
which is the default value used in TFM, but the option is
non-hidden, allowing the user to overwrite the default
value if needed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
On SoCs featuring the USBREG peripheral, the nrfx_power driver uses
the nrfx_usbreg one internally, so enable the latter when the former
is enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0
and adds new configuration option to enable two stage LFCLK start
sequence.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
RDC module is used by i.MX8MM SoC, so let's create a Kconfig symbol
which will be used to enable the module in SDK.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
This commit adds a NRF_802154_MULTIPROTOCOL_SUPPORT Kconfig switch
that makes it possible to use nRF 802.15.4 radio driver in
a multi-protocol scenario.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Add support for the SX126x series of LoRa radios using the
LoRaMAC-Node HAL.
This driver currently makes the following assumptions:
* DIO1 is used as an interrupt line.
* There is an RF switch selecting between the TX and RX ports and
that switch is controlled by DIO2.
* There is either no TCXO or the TCXO is controlled by DIO3.
Specifically, the limitations above mean that modules that use GPIOs
to control the RF switch are currently not supported. Support for such
modules would need changes to the LoRaMAC-Node code.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add initial support for nuvoton numicro m48x SoC series, basic
init and uart functionality are covered with gpio and clock
directly relies on HAL.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
tested on mimxrt1060_evt
MEMORY_NOCACHE is needed
test on frdmk64f
special test slot need configure with
CONFIG_DMA_TEST_SLOT_START
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some Kinetis SoCs have an instance of the the TPM module
that can be used for PWM control. As such, add the necessary
configurations to enable it on the SoCs that support it, as well as
enable the clock for the module to function.
In this case, the enablement is done only for the KW41Z SoCs,
but there are other SoCs that support it, f.i. KW38Z
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Add option for indicating that a NXP Kinetis SoC contains a
Digital-to-Analog (DAC) module.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add option for indicating that a NXP Kinetis SoC contains a
Digital-to-Analog (DAC32) module.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit introduces the Kconfig configurations for the CMSIS-DSP
digital signal processing library.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the west.yml to point to the commit that adds the
CMSIS-Core(A) and defines the configurations to enable it, in
preparation for the AArch32 Cortex-A architecture support in Zephyr.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add CSMA CA capability for the `ieee802154_nrf5` radio driver along with
appropriate implementation in the `nrf5_tx` function.
Introduce 802.15.4 radio driver with CSMA/CA support enabled. Add help
text, mentioning a list of peripherals occupied by the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We can build the openamp library configured with VirtIO master
support, VirtIO slave support, or both. By default both master
and slave code is enabled. We can reduce code footprint by only
build master or slave as needed.
Expose Kconfig options for Master & Slave and set them accordingly in
the sample.
Here's the code reduction we see:
For the total image we see as 1260 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 30308 B 256 KB 11.56%
FLASH [Master only] : 29048 B 256 KB 11.08%
On the remote side we see a 828 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 11564 B 64 KB 17.65%
FLASH [Slave only] : 10736 B 64 KB 16.38%
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This PR provides changes that are required after replacing Tinycbor
with copy of source code from mynewt-core.
The Tinycbor has been replaced with mynewt-core version to reduce
maintenance effort; by replacing it the Zephy specific changes have been
reduced to small patch over mynewt codebase.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
More clear and detailed description of choices, and explicit
recommendations for users. Based on a question on the mailing list.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The glob in modules/Kconfig accidentally picked up Kconfig.tls-generic,
which is only supposed to be included from modules/Kconfig.mbedtls.
Replace the globbing with explicit 'source's to fix it. Best to avoid
globbing unless absolutely necessary, because it tends to pick up random
non-checked-in files as well.
Use 'source' instead of 'osource' since the files are known to exists.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Kconfig.tls-generic is already 'source'd within an 'if MBEDTLS' in
modules/Kconfig.mbedtls (the 'if' covers most of the file).
Flagged by https://github.com/zephyrproject-rtos/ci-tools/pull/128.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Include the CANopenNode CANopen stack as a module in Zephyr.
CANopenNode is licensed under the Apache-2.0 license.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add Kconfig option for indicating that a given SoC contains the
OpenISA RV32M1 Timer/PWM module (TPM).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The HAS_IMX_{RDC,CCM} symbols were added to ext/hal/nxp/imx/Kconfig in
commit 3afc2b6c61 ("ext/hal/nxp/imx: Import the nxp imx7 freertos bsp"),
and later copied over to modules/Kconfig.imx in commit 12438e1047 ("ext:
hal: Make NXP HALs a Zephyr module").
Never used.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A single menu within an if like
if FOO
menu "blah"
...
endmenu
endif
can be replaced with
menu "blah"
depends on FOO
...
endmenu
Fix up all existing instances.
Also remove redundant extra menus underneath 'menuconfig' symbols.
'menuconfig' already creates a menu.
Also remove the menu in arch/arm/core/aarch32/Kconfig around the
"Floating point ABI" choice. The choice depends on FLOAT, which depends
on CPU_HAS_CPU, so remove the 'depends on CPU_HAS_FPU' too.
Piggyback removing a redundant 'default n' for BME280.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds the necessary bits to build the Xtensa HAL as
a module, and removes the bits to use the HAL built with
the Zephyr SDK.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr spi interface. It leverages heavily from the existing mcux dspi
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update the hal_nordic module revision to switch to nrfx 2.0.0.
Add Kconfig options that enable to use the newly introduced nrfx
drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
For nordic_nrf, this commit relocates HAS_CMSIS_CORE selection from
SoC Kconfig to the HAL module Kconfig, as done for other SoCs.
For nxp_kinetis, remove redundant HAS_CMSIS_CORE selection in SoC
Kconfig, as it is already selected by the HAL Kconfig.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates all references to HAS_CMSIS to use HAS_CMSIS_CORE
instead. With the changes introduced to allow multiple CMSIS variants
to be specified, the latter is semantically equivalent to the former.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.02.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/3
Signed-off-by: Armando Visconti <armando.visconti@st.com>
It seems that the ST sensor hal expects <math.h> for float_t and
double_t definitions. Now that we have those for minlibc we don't need
to require newlib.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PR #18780 introduces a way to decouple pthread support from the general
CONFIG_POSIX_API global switch. This commit modifies the build of
SimpleLink components to take advantage of it, since SimpleLink
libraries only require pthread, sem, clock, and sleep support, not
entire POSIX API.
This fixes the build errors in the http_get sample introduced
by the merge of #18736. As such, this patch also removes
cc3220sf_launchxl exclude from sample.yaml of that sample.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds support for Kinestis K22
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread tweaks some specific mbedTLS configs for it's own need, that
allows to save some RAM/ROM. Allow to set these in generic config file
if OpenThread is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
From mbedTLS's description:
Enable deterministic ECDSA (RFC 6979).
Standard ECDSA is "fragile" in the sense that lack of entropy when
signing may result in a compromise of the long-term signing key. This
is avoided by the deterministic variant.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Quite a few nrfx drivers are missing corresponding Kconfig options
that would enable their use in Zephyr applications.
Add such options, to facilitate the use of nRF peripherals for which
there are no Zephyr driver shims or even suitable APIs.
Jira: NCSDK-2744
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The options are given prompts, so that they become accessible from
application configuration files and visible in menuconfig, and they
are complemented with proper dependencies, so that only the relevant
ones for the selected SoC are made available.
Jira: NCSDK-2744
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use a consistent way of enabling particular instances of peripherals
in nrfx drivers through options defined in modules/Kconfig.nordic,
to make the usage of nrfx drivers in Zephyr, especially the ones for
which there are no Zephyr driver shims (yet), easier.
Jira: NCSDK-2744
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This Kconfig option applies to the TI CC32xx SDK in general, given it is
the same as the CC3220 SDK.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
A lot of the Kconfig stuff gets copied around, so encourage a clean
compact style:
- Reduce license header spam
- Fix some broken indentation
- Turn a meaningless 'menuconfig' into a 'config'
- Remove a redundant QMSI menu
- Unscrunch comments: #Foo -> # Foo
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Maintain this HAL in its own repo:
git@github.com:zephyrproject-rtos/hal_openisa.git
and manage using west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds civetweb as a west module and a sample that uses it.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Due to in-tree dependencies on Kconfig options defined in modules we end
up having warnings and errors when those modules are not part of the
manifest.
Users should be able to remove unwanted modules from their downstream
manifest and still build any board configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
