Even if the enum contains the same values, the values might
change if the wpa_supplicant sources change or Zephyr values
change. In order to avoid weird errors later and prevent the
following warning, add a conversion functions for the enums.
modules/hostap/src/supp_api.c:1172:23: warning: implicit conversion
from enumeration type 'enum mfp_options' to different enumeration
type 'enum wifi_mfp_options' [-Wenum-conversion]
status->mfp = ssid->ieee80211w; /* Same mapping */
modules/hostap/src/supp_api.c:1190:30: warning: implicit conversion
from enumeration type 'enum wpas_mode' to different enumeration
type 'enum wifi_iface_mode' [-Wenum-conversion]
status->iface_mode = ssid->mode;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "enum wpa_msg_type" was not found by default so add needed
include files to get the definitions.
modules/hostap/src/supp_main.h:61:57: warning: ‘enum wpa_msg_type’
declared inside parameter list will not be visible outside of
this definition or declaration
61 | void wpa_supplicant_msg_send(void *ctx, int level,
enum wpa_msg_type type,
const char *txt,
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both the supplicant_set_btwt() and supplicant_ap_bandwidth() are
not found in Zephyr sources so remove them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled, there
are lot of missing functions reported during linking.
Add missing C files to the compilation to fix this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Without this there is an error
modules/lib/hostap/src/crypto/fips_prf_internal.c:47: \
undefined reference to `SHA1Transform'
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The P2P support needs EAPOL support in order to avoid a compilation
error about missing eap field in wpa_ssid struct.
modules/lib/hostap/wpa_supplicant/wpa_supplicant.c:5102:65:
error: ‘struct wpa_ssid’ has no member named ‘eap’
5102 | eap_is_wps_pin_enrollee(&wpa_s->current_ssid->eap)) {
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The functions in ip-addr.c are needed in more places than just
for hostapd so add it unconditionally to the build.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Rename the Silabs HCI driver to hci_silabs_efr32.c to better indicate what
hardware it supports. Also rename the associated devicetree binding and
Kconfig options to be consistent with the new driver name.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Swap from the deprecated device_init_* functions to clock manager
for clock tree configuration. Populate config headers using
device tree representation of clock tree and oscillator config.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The DC-DC converter was unconditionally initialized with default
settings on Series 2. Add device tree binding and nodes, and guard
call to init function. Map DT options to config header from HAL.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Move the CMakeLists.txt and Kconfig files from the hal_silabs tree under
modules/hal_silabs in the main tree. This also includes all Zephyr shim
code from the hal_silabs tree.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The Thrift library makes use of POSIX C functions such as ctime_r(), which
are not part of the ISO C standard.
This commit adds a Thrift module-wide `_POSIX_C_SOURCE` feature test macro
definition in order to ensure that the required POSIX C functions are
available when compiling the Thrift library.
Note that this was not caught earlier because Newlib and older versions of
Picolibc did not properly fence off some POSIX functions behind the feature
test macros.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This new version introduces a new sub-command `uicr-compile`, which will
generate `uicr.hex` based on a new binary format required by an upcoming
release of Secure Domain Firmware (SDFW) closer to production.
Since this is a breaking change, and SDFW is not finalized yet, we need
to support two nrf-regtool versions for a short time, and use different
CLI invocations based on which version is installed. Hence, the minimum
required version is unchanged.
Additionally, retire CONFIG_NRF_REGTOOL_EXTRA_GENERATE_ARGS. There will
be no use for it moving forward.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
For transmit_message if the transmission is timed and underlying
driver supports `IEEE802154_HW_SELECTIVE_TXCHANNEL` then use
the selective txchannel feature for transmission.
This does not change the current `channel` at the moment of call,
the driver will transmit the message on the channel selected through
`net_pkt_set_ieee802154_txchannel` then (after receiving an ACK
if requested) it will return to the original channel.
When Kconfig option IEEE802154_SELECTIVE_TXCHANNEL is turned on,
the timed transmissions scheduled some time ahead on different
channel will not abort ongoing reception until the exact moment
of transmission comes.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
This commit increases the range of value for the
OPENTHREAD_CLI_MAX_LINE_LENGTH option to the maximum allowed.
The previous range may have been insufficient for Openthread vendor CLI
commands.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The production version of the nRF54L15 SoC is now available, so remove
the initial Engineering A (EngA) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This config will be used to indicate if a platform
has the support for monolithic BT feature.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Driver now uses multi-instance PDM nrfx API and
defines PDM device based on available instances.
It also introduces calculating PDM frequency using
prescaler, present on nRF54L15 FP1.
Updated nrfx API version changed to 3.7 to use the
new PDM API.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
New PDM, some present on nRF54L15 FP1, instances have
been added. Modified condfiguration file for nRF5340,
which now requires PDM0 instance.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Added dedicated nrfx configuration files for
nRF54L15 FP1, which differ from ENGA variant with
inclusion of PDM.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
In "connect" all networks are removed and new network is always added,
but in disconnect the network isn't deleted, so, the memory is
unnecessarily held till next connect. This is not exactly a leak, but if
someone profiles using "kernel heap" then this can be construed as a
leak.
Fix this by removing network during the disconnection (for now "all") so
that the memory can be used by someone else.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Since we now have PSA Crypto APIs/Mbed TLS alternatives for crypto
operations in all Zephyr's codebase we can start the deprecation
of the TinyCrypt libary (as planned from #43712).
This commit is only the inital step: updates documentation and
add the DEPRECATED Kconfig option to the TINYCRYPT one.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Fix DPP build error when HOSTAPD enabled and DPP disabled.
Guard hapd_dpp_dispatch in both CONFIG_WIFI_NM_WPA_SUPPLICANT_DPP
and CONFIG_WIFI_NM_HOSTAPD_AP.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Implement callback for incoming CAN messages for any of the
configured filters for CANopenNode.
This can be used to wake the loop calling CO_process when a
new message was received which needs processing.
Signed-off-by: Christian Gabriel <ch_gabriel@web.de>
When try to start SAP on channel 12 with region code US, the channel
check will fail and calls supplicant_send_wifi_mgmt_ap_status() with
iface->owner is NULL, which causes DUT hang. Set iface->owner when
enable the SAP can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Don't attempt to take a mutex if operating from inside an ISR. The only
expected use-case where this should occur is when attempting to reboot
via `tfm_platform_system_reset` from an exception handler.
Fixes#79687.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Enterprise security doesn't have either SAE or PSK, so, using a blanker
else throws a false warning. Fix the checks to proper handler enterprise
mode.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
EAP-FAST has extra requirements (TLS 1.3, session tickets etc) and is
seldom used, so, remove it from Enterprise list and add a separate
Kconfig option.
This solves the build error when Enterprise mode is enabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This commit introduces a new option, OPENTHREAD_CLI_VENDOR_EXTENSION,
in the Zephyr OpenThread module to map the upstream option
OT_CLI_VENDOR_EXTENSION.
OPENTHREAD_CLI_VENDOR_EXTENSION option specifies the path to a CMake
file that defines and links the CLI vendor extension. By setting this
option, it enables the addition of vendor-specific commands to
the OpenThread CLI interface.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Enabling all EAP types for enterprise mode increases
memory usage in both ROM and RAM. Provide config options for each
type to let solutions choose the methods based on their
requirements.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Adds supporting code that allows the RAM load mode of MCUboot to
be used and for applications to build successfully with it.
Sysbuild can be used to build images for this mode
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The mcux_acmp will get support by the comparator subsystem. To avoid
namespace clashes, namespace the driver, kconfigs and use the
MCUX_ACMP config solely to select the MCUX SDK driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The format of wpa_passphrase and sae_password is wrong when start the
SAP, which leads the invaild MIC check error when other STA try to
connect in security mode. Change the wrong format can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Now that hostap is used k_heap, it needs to reserve the kernel heap not
libc heap.
Fixes#79477.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This was we can modify it in a single place that works both for native
and OS specific code.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Service for powering peripherals that use GPIO pins
in the global power domains:
- Active Fast
- Active Slow
- Main Slow
Signed-off-by: Rafal Dyla <rafal.dyla@nordicsemi.no>
Add crypto module test kconfig option
CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_TEST,
which is default n and hidden.
It is only available by developer for crypto module test.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
The previous NET_EVENT_SUPPLICANT_CMD_INT_EVENT is from
"enum net_event_supplicant_cmd" but the supplicant_send_wifi_mgmt_event()
has the event parameter as an "enum net_event_wifi_cmd" and those event
number spaces are different.
This meant that the wrong event value NET_EVENT_SUPPLICANT_CMD_INT_EVENT
maps to NET_EVENT_WIFI_CMD_TWT (from "enum net_event_wifi_cmd") which
fortunately did not cause issue in this case because the
supplicant_send_wifi_mgmt_event() has no handling for this TWT event value.
It is important we fix this as this can cause great confusion in the
future.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Uses imgtool directly to sign images instead of calling west sign,
this also removes the MCUBOOT_CMAKE_WEST_SIGN_PARAMS Kconfig option
as this has no effect
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a Kconfig which can be selected when building for firmware
updater mode to select if this is the application or the firmware
updater image that is being built
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Save information regarding SVD file in use in vendor-specific section
of the build info file.
Information is stored under Nordic section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When building with `MBEDTLS_PSA_CRYPTO_C` enabled, compile in the
PAKE (Password-authenticated key exchange) implementation.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The new GRTC reading manner of the SYSCOUNTER uses hardware mechanism which
allows to keep it alive when any of CPUs is not sleeping. Otherwise
the SYSCOUNTER goes into sleep mode. Thus there is no
longer need to maintain the `CONFIG_NRF_GRTC_SLEEP_ALLOWED` symbol, however
if the user wants to have the SYSCOUNTER enabled all the time the
`CONFIG_NRF_GRTC_ALWAYS_ON` can be used instead.
The nrfx_grtc driver no longer provides the `wakeup-read-sleep` reading
manner.
Also setting the GRTC clock source is performed by the nrfx_grtc driver so
it has been removed from the `sys_clock_driver_init()` function.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Using a separate workqueue causes issues without any special locking to
synchronize with networking threads e.g., interface being removed while
the workqueue is trying to synchronize with WPA supplicant.
It's easier to use the net_mgmt thread which is in better sync with
networking.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case of error conditions post successfully sending the message, the
event is already freed but we attempt to free it again.
Rejig the labels to easily reflect thier purpose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When an event is sent the receiver gets is asynchronously and hence is
responsible for free the event, the sender should only free in case of
error conditions i.e., unable to send.
Else, this causes a tough to debug double-free.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case WPA supplicant disabled DPP, we need to compile out the
corresponding DPP code in Wi-Fi shell too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
With the secure storage subsystem now providing an implementation of
the PSA ITS API, let Mbed TLS use it when it's enabled.
This allows the use of persistent keys in the PSA Crypto API.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add `OPENTHREAD_STORE_FRAME_COUNTER_AHEAD` Kconfig option
and set it to 100000, as after calculations it appears to
be a more suitable value.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Enable Cortex R8 support, similar to Cortex-R5.
Signed-off-by: Krzysztof Sychla <ksychla@antmicro.com>
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
The LVGL input callback does not use an instance specific name, so we
can only ever have one instance of this type. This issue was evident by
a build error, e.g., when using "zephyr,lvgl-keypad-input" nodes twice:
error: redefinition of '_input_callback__lvgl_keypad_process_event'
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
The security check case statements were in frequency band
setting checks. This is totally wrong and will cause compiler
warnings. Moving the checks to correct function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In order to be able to ifdef based on `CONFIG_RUST`, the config must be
defined in the main repo (because the rust module is optional). Add
this as a placeholder. If the module is not availabe, the symbol will
be present, and always disabled. The module will provide a full
definition for the Kconfig.
Signed-off-by: David Brown <david.brown@linaro.org>
By default, TFM enables hardware rollback protection, which requires a
security counter to be embedded in the image trailer. The default
behaviour of constructing this counter from the image version breaks the
TFM `boot_nv_security_counter_update` implementation once the version
number is greater than `0.0.1024`. As such, explicitly specify the
desired security counter value. As per the MCUboot docs, this does not
need to be incremented on every firmware update.
Signed-off-by: Jordan Yates <jordan@embeint.com>
For add_interface(), only add STA interface when hostapd enabled,
and the Soft-AP interface will be added in zephyr_hostapd_init().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
DVFS medlow oppoint should use trim entry index 2,
this needs to be updated in hal/hal_nordic.
Currently this is not possible because of time
constraints that is why this temporary patch
is applied. This is the only point where
new_f_trim_entry is used.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
This defines raspberrypi,pico-xosc along with a configurable startup
delay multiplier. On some boards, the XOSC takes longer to stabilize.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
When we have coexistence of hostapd and wpa_supplicant,
wpa_msg has different implementation.
So to let them work together, we need to have common implementation
for wpa_msg and dispatch msgs for hostapd and wpa_supplicant.
So add register zephyr_hostap_ctrl_iface_msg_cb,
and judge if ctx is hostapd by the first integer where ctx points to.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Hostapd has TODO in hostapd_dpp_handle_config_obj,
to save DPP connector using wpa_msg.
AP DPP needs to use dpp_connector, dpp_netaccesskey and dpp_csign
in DPP Peer Discovery handshake in hostapd_dpp_rx_peer_disc_req.
So add AP DPP wpa_msg event handler to store these info.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add hostapd mgmt ops, some use same api as wpa_supplicant,
and DPP use different ops.
supplicant_dpp_dispatch use wpa_cli and hapd_dpp_dispatch use hostapd_cli.
And use common DPP param parse.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
There are HCI drivers which reference the module-specific Kconfig symbols
which are auto-generated when the modules are present. Provide default
definitions for these symbols in case the modules are missing, so that
compliance checking doesn't stumble over seemingly non-existent Kconfig
options.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This commit introduces the option to place the mbed TLS heap in a custom
memory section. The heap might be quite large depending on concurrent
TLS connections, thus it might be needed to place this manually
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
According to Mbed TLS changelog this feature was set default ON
since 3.1.0 release, so the build symbol is no more available.
This commit removes it from Zephyr.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The RADIO and RADIO_TIMER HAL modules will be required to
implement BLE support for STM32WB0 series.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Mbed TLS automatically sets PSA_WANT_KEY_TYPE_[RSA/ECC]_KEY_PAIR_BASIC
whenever "_IMPORT || _EXPORT || _GENERATE || _DERIVE" operations
are set. Therefore we just set the proper actions where required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add null termination of ssid and psk. If user pass ssid,
psk without null terminator it will add by default.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
For some systems, the display peripheral or GPU requires that buffers be
aligned on a boundary for optimal performance. We already align display
buffers using CONFIG_LV_ATTRIBUTE_MEM_ALIGN_SIZE, but some applications
will rely on the definition of LV_ATTRIBUTE_MEM_ALIGN. Provide this
definition so those buffers will be aligned as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add condition for KConfig Renesas FSP hal module
Move the DUAL_BANK_MODE from SOC to flash driver KCONFIG
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Taking a cue from `nrfx/templates`, introduce this file so that it can
be overridden out-of-tree to add external nRF product definitions.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add new binding and a node to nrf54h20. Update Kconfig and nrfx_config
to include nrfx_tbm driver when node with that compatible is enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The default Max A-MPDU length is 8191 shown in the VHT Cap Info from
SAP's beacon/Assoc response, and this length is read from
hapd->iface->conf->vht_capab. It will lead to the AMPDU only contains
5 packets and the throughput is only 60Mbps for 1x1 HE case in 5GHz.
Change the default vht_capab to VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX
(1048575), and the throughput can be increased to 83Mbps.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Require the presence of the nrf-regtool package as well as its exact
version, failing the build whenever the required version is not found in
the system.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds support for settings/getting RTC time and using alarm/update feature.
The alarm option needs all fields to be set due to a hardware limitation.
RTC shares the same interrupt with the watchdog. Thus shared
interrupts must be enabled when WDT and RTC both need to trigger the ISR.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
When build with the psa_crypto_driver, it will try to include common.h
of mbedtls, but actually include the common.h from hostap, and causes
build error of undefined symbol. Use zephyr_interface_library_named
to define hostap, and other modules needs to link the library of hostap
when wants to use the header file in /utils path, such as the common.h.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
WIFI_NM_WPA_SUPPLICANT_CRYPTO_MBEDTLS_PSA should not be by default
selected when WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT is selcted. Enable
PSA APIs if desired separately.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Set WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT as the default crypto
configuration. The crypto ALT implementation contains the necessary
crypto operations and also allows the user to choose PSA or non PSA
crypto operation.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This option switches support for multiple volumes on the physical drive. By
default (0), each logical drive number is bound to the same physical drive
number and only a first FAT volume found on the physical drive will be
mounted.
When this function is enabled (1), each logical drive number can be bound
to arbitrary physical drive and partition listed in the VolToPart[].
The VolToPart[] is expected to be provided by Zephyr application.
For example, 2 FAT partition on SD disk ("SD" index 3) in terms of Zephyr:
{3, 1} - mount point "/0:"
{3, 2} - mount point "/1:"
The mount points have to be numbered in this case.
Code example of mounting a second FATFS partition places on SD-card:
static FATFS fat_fs;
static struct fs_mount_t mp = {
.type = FS_FATFS,
.fs_data = &fat_fs,
.mnt_point = "/1:
};
/*
* 2 FAT partition on SD disk
* PARTITION.pd - Physical drive number. "SD" has index 3 in terms of
* Zephyr (see FF_VOLUME_STRS)
* PARTITION.pt - Partition (0:Auto detect, 1-4:Forced partition). So 1 for
* the first FATFS partition and 2 - for second.
*/
PARTITION VolToPart[FF_VOLUMES] = {
[0] = {3, 1}, /* "0:" ==> 1st partition on the pd#0 */
[1] = {3, 2}, /* "1:" ==> 2nd partition on the pd#0 */
[2] = {0, -1}, /* "2:" ==> 3rd partition on the pd#0 */
[3] = {0, -1},
[4] = {0, -1},
[5] = {0, -1},
[6] = {0, -1},
[7] = {0, -1},
};
fs_mount(&mp);
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
The Kconfig option enables support for 64-bit LBA, which also allows
to enable GUID Partition Table (GPT) support.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Issue:
Kconfig WIFI_AIROC should not depend on infineon SOC family selection
for the connection. See issue#77012 for details.
Fix:
- update modules/hal_infineon/Kconfig to be able enable
USE_INFINEON_ABSTRACTION_RTOS for non Infineon SOC family.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Link mode shows unknown when legacy (A or bg only) device connects to
APUT. Set the link mode to WIFI_2 when the host freq over 4000 and set
link mode to WIFI_3 when the host freq over 2000.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
This is the bare minimum and includes the SoC, pinctrl, flash and
devicetree.
I had to include the flash driver that early because I couldn't make
Zephyr compile without flash driver nodes in the device tree.
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
This commit just moves some code around. For sake of cleanliness
a new file is added to hold the entropy parsing functions
for Mbed TLS.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is meant to be used only for tests on platforms where CSPRNG
sources are not available. It should not be used in production.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Improve the description of both MBEDTLS_PSA_CRYPTO_LEGACY_RNG and
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG kconfig symbols.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENABLED suffix does not really makes much sense for a kconfig
so it should be removed. Also other MBEDTLS symbols were recently
updated accordingly.
Moreover having it named exactly the same way as in Mbed TLS
symplifies the understanding of what this kconfig is doing.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Enable the `MBEDTLS_PEM_WRITE_C` mbedtls configuration option when
`CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT` is selected.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
Initial commit for entropy support on RA8
- drivers: entropy: implementation for TRNG driver of RA8x1
- dts: arm: add device node for trng of RA8x1
- boards: arm: enable support zephyr_entropy for ek_ra8m1 and
update board documentation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
The nRF9280 is a SiP (System-in-Package) consisting of the nRF9230 SoC
and additional components such as PMIC and others. Additionally,
the nRF9230 contains several CPUs, similarly to the nRF54h20 SoC.
Update nrfx glue, and add necessary Kconfig and initialization code
to allow building for nRF9280 targets: CPU, Radio and PPR cores.
The nRF9280 is used for all user build targets and Kconfigs,
whereas the nRF9230 is used as the build target for the MDK.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
MCUX ehci controller driver support cache maintenance if
USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE is enabled.
Enable USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE if
CONFIG_UDC_BUF_FORCE_NOCACHE is false and CONFIG_NOCACHE_MEMORY
is true.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
For Enterprise crypto MbedTLS needs more heap either separate pool or
libc heap, based on experiments 55000 was arrived for a successful
WPA2-EAP-TLS association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
First commit to support serial driver running on r_sci_uart for Renesas
RA devices.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
In order to mitigate side channel attacks, even if the PWE is found the WPA
supplicant goes through full iterations, but in some low-resource systems
this can be intensive, so, add an option to exit early.
Note that this is highly insecure and shouldn't be used in production
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This should be configurable by applications in case a full CLI interface
to the WPA supplicant is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Now retained_mem driver can utilize nrfx_ram_ctrl helper
for nRF devices. It provides abstraction over various RAM retention
peripherals like POWER, VMC or MEMCONF.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Allows RTT inizialization function to either init Cntrol Block always
or initialize only after checking it it's not already initialized by
another program, typically by a bootloader.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Allows optionally placing Segger RTT data either in a specific
linker section that is located at RAM start, or in a specific linker
section defined by a memory region in DTS, as third and fourth
alternative to the DTCM section or the default data section.
This is useful to share the fixed address for different programs,
typically bootloader and application, and have seamless logging.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
User can assign callback function to local domain dvfs handler
and get notification when scaling process is finished for
particular domain.
Reworked usage of DVFS_SERV_HDL_FREQ_CHANGE_IN_PROGRESS_BIT_POS
which was not initialized properly.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Wi-Fi shell now uses _sta/_ap APIs to getch specific inteface types, so,
by default register as a Station.
This needs more work to handle multiple modes and mode switching.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is required since NRF_FUN_POS (pinctrl) has changed its position
from 17 to 18 (a value hardcoded in the nrf-regtool as well).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove the duplicate `USE_STM32_HAL_RAMCFG` Kconfig symbol definition
from Kconfig.stm32, which was introduced by accident in PR #66181,
commit 6ed002ddae.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
1. Support USB-C drivers TCPC, PPC, and VBUS with UTCPD H/W IP
2. UTCPD is interconnected with Timer-triggered EADC for updating
VBUS/VCONN voltage periodically
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Remove the ‘HAS_MCUX_ACMP’ Kconfig, and also remove it from
driver and soc Kconfig files. It is not needed since we already
depend on 'ACMP' enabled in the dt file, the 'HAS_MCUX_ACMP'
kconfig is a relic of the past before devicetree was stable.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Packets are routed between OT and Zephyr net stacks.
For IPv4 these packets are managed by NAT64 by default.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Changes the ramp-up time from 1000us to 550us
on nRF54H20.
The time must fit inside general preconditions ramp up.
The hfclk time can be adjsuted this way because
the current solution is not precise until
the clock_control is available.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
WIFI_REASON_DISCONN_UNSPECIFIED is 1, when disconnect reason is 0,
wpas_to_wifi_mgmt_disconn_status return the
WIFI_REASON_DISCONN_UNSPECIFIED and print error log "Disconnection
request failed (1)"
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
It looks like nrf-regtool depends on the
https://pypi.org/project/devicetree/ Python package, which contains an
old copy (https://github.com/zephyrproject-rtos/python-devicetree) of
the in-tree devicetree package.
Because no major changes have happened in the devicetree scripts, this
likely went unnoticed. However, realized today that such old package is
not able to parse bindings with multiple buses (e.g. in I3C, where we
have `bus: [i3c, i2c]`).
While a proper solution is discussed, inject `PYTHONPATH` with the
in-tree library.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Rename `MBEDTLS_PSA_CRYPTO_RND_SOURCE`->`MBEDTLS_PSA_CRYPTO_RNG_SOURCE`
as all other options use `RNG` for random number generator instead of
`RND` for random number.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When multicast packet is forwarded to the OpenThread stack it has to
have its "multicast loop" flag enabled to be processed by the stack
itself instead of only propagating it further.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
As of v2.1.0 TF-M has updated to CMSIS v6 and switched from hosting
the sources to depending on the upstream repository, cloning it at
build time.
To prevent a download from happening during the build, CMSIS v6 sources
are pushed to Zephyr's fork of TF-M and the `CMSIS_PATH` CMake variable
is set to point to them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Make it depend on MBEDTLS_PSA_P256M_DRIVER_ENABLED instead of
selecting it.
This fixes the build of
tests/crypto/secp256r1/crypto.secp256r1.p256-m_raw on filtered-out
platforms since PR #75441 (83cd9f5a01).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Fix builds with `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`. The merged binary
should be signed with the same argumements as a secure build, not a
non-secure build, except with a different layout file generated by the
TF-M build system.
Fixes#68345.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Currently, the NFCT pins cannot be used as GPIOs on the nRF54L15 MCU
because the Nordic HAL for this MCU uses the new upcoming `NRF_CONFIG_`
style configuration settings for this MCU.
To support all nRF5x MCUs, the old configuration is still required
because Nordic didn't update their MDK entirely to the new style.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
In function nrfs_backend_send_work tx_data buffer was
used in function ipc_service_send instead of
data_to_send. This is fixed and also tx_data and rx_data
are moved to coresponding functions preventing such
issues in future.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Added definition MCUX_SDK_SAI_ALLOW_NULL_FIFO_WATERMARK
to fix timeout fault on the I2S_Speed test
using MIMXRT1170_evk/mimxrt1176/cm7.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
WPA supplicant as a network manager monitors interface events and
registers to the Wi-Fi NM module, so, adding a check for NM type before
registering the interface is wrong.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of silently `#undef`ing PSA_CRYPTO_C when TF-M is in use,
enforce that rule at the Kconfig level.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Adding a semicolon after the do-while loop in the LV_DEV_INIT()
macro also supports multiple instantiation.
Signed-off-by: Stephan Linz <linz@li-pro.net>
We only need the interface to be administratively up, the operationl
status is managed by the WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Due to recent changes to hostap, the stack usage is increased, so,
increase the stack size to fix SoF.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes build issues when Wi-Fi security is enabled for default
implementation, the alternative implementation is managed separately,
and doesn't need these.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Incremental builds for TF-M are not picked up by Zephyr linking stage.
Code changes to tf-m repository results in a rebuild of TF-M and thus
an updated tfm_s.hex (and other files).
tfm_s.hex is merged together with the zephyr hex to form a final merged
hex file for flashing. This is done as a post-build command, however
such as step cannot take extra dependencies. The Zephyr target can have
extra dependencies, however that will only ensure the dependency is
brought up-to-date when Zephyr re-link, not re-linking Zephyr when the
dependency changes.
Therefore an object dependency is placed on the interface.c file for
Zephyr TF-M interface implementation, which ensures the tfm_api library
is brought up-to-date whenever TF-M rebuilds, and this update again
ensures the Zephyr itself is re-linked whenever TF-M rebuilds.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add initial support for the Cortex-M85 Core which is an implementation
of the Armv8.1-M mainline architecture.
The support is based on the Cortex-M55 support that already exists in
Zephyr.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
In device init phase, it will call _mbedtls_init before malloc_prepare
as mbedtls has higher priority defined in SYS_INIT..
_mbedtls_init() will call psa_crypto_init() and malloc buffer,
but z_malloc_heap is not initialized, which will cause device hang.
Should call malloc_prepare() before _mbedtls_init to fix this issue,
so decrease the priority of mbedtls to default 40.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
This patch adds a kconfig option `LV_Z_MEMORY_POOL_CUSTOM_SECTION`
which allows to place the buffer the memory pool is backed by into a
section with the label ".lvgl_heap".
Resolves issue: #66494.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Removes the wrapper code of the kscan based pointer input device. It was
implemented during the transitioning phase until all intree drivers were
converted to the input subsystem.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Use select_network instead of enable_network, then can trigger sta
connection mutiple times. Also update the configuration in
add_interface().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Split wifi interface into station mode and soft-AP mode, as there may be
station and soft-AP two interfaces that work concurrently.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The following heap-related Kconfigs shared by the picolibc &
minimal libc have been deprecated for more than 2 releases,
remove them and update the Kconfigs accordingly:
- `CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE`
- `CONFIG_MINIMAL_LIBC_REALLOCARRAY`
Cleanup the handling to support the deprecated malloc arena
size configuration values.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Both Clang [1] and (recently) GCC [2] support this flag to enable
additional codesize optimizations beyond -Os, possibly at the expense of
performance.
This tradeoff is worthwhile for some (and, Clang's -Oz seems to be
closer to GCC's -Os currently), so add a new abstraction for this flag
so users can select it as appropriate.
[1] https://clang.llvm.org/docs/CommandGuide/clang.html#cmdoption-O0
[2] https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-Oz
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
TF-M is a PSA API provider alternative to Mbed TLS one. As
a consequence when CONFIG_BUILD_WITH_TFM is set
CONFIG_PSA_CRYPTO_CLIENT should be set as well.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
udc_mcux_ehci is based on the MCUX USB controller driver
(usb_device_ehci.c); udc_mcux_ip3511 is based on the
MCUX USB controller driver (usb_device_lpcip3511.c);
add related Kconfig and CMake; include the usb_phy.h path in
modules/hal_nxp/usb/CMakeLists.txt because udc_mcux.c use it;
add related macros to usb_device_config.h;
update CMakeLists for udc_mcux_ehci and udc_mcux_ip3511.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Use zephyr_blobs_verify to check the blob file is valid
or not.
The function zephyr_blobs_verify will check if the file
exists. And it checks if the file is valid.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add Kconfig.nxp to support NXP Bluetooth Chipset.
Current only NXP IW612 Chipset (BT_NXP_NW612) has
been supported.
Add modules/hal_nxp/bt_controller/CMakeLists.txt to
determine whether any firmware is selected, and
check whether the firmware exists.
If the firmware exists, copy the firmware to the
temporary folder ${ZEPHYR_BINARY_DIR}/include/
generated/bt_nxp_ctlr_fw.h. OR, raise a fatal error.
In file hci_nxp_setup.c, includes the temporary file
bt_nxp_ctlr_fw.h.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add proper PSA_WANT kconfigs for TLS sockets and RSA key exchanges
when CONFIG_PSA_CRYPTO_CLIENT is set.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
For sake of memory footprint it might be required to shrink
down the memory footprint as much as possible. Unfortunately Mbed TLS
PSA interface brings in some extra code for key management which makes
it larger than the TinyCrypt counterpart when it comes to p256-m
interfacing. For this reason it might be useful to directly access
the p256-m driver directly.
This commit adds this support and it also updates the corresponding
test in order to make use of this condition.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Ensure psa_crypto_init() is called during initialization when
Mbed TLS acts as a PSA crypto client. This will setup the PSA
crypto server for further calls.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add support for the CortexM optimized implementation of secp256r1
code. It supports:
- import & export
- key agreement
- sign & verify
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adds an appropriate condition to the Kconfig as
the temperature driver is not supported for nRF54H20 devices yet.
Without this change, a build with NRF 802.15.4 libraries produces
Kconfig error.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Clock_control is currently not supported on nRF54H20.
This commit adds new way of handling the hfclk targeted for nRF54H20.
This solution shall be replaced once the clock_control is supported
for nRF54H20.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Make call to de-initialize disk in fatfs_unmount(). This will permit the
disk to be reinitialized when it is mounted with fatfs_mount().
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Channels owned by a child core shall also be included in the mask of
used channels (channels that cannot be allocated by the GPIOTE channel
allocator).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove CONFIG_NO_PBKDF2 and CONFIG_NO_CONFIG_BLOBS definition
and let them be decided in kconfig.
CONFIG_NO_PBKDF2 is default y when crypto backend is
WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE.
CONFIG_NO_CONFIG_BLOBS is default y when both DPP and enterprise disable.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add Platform Secure Architecture support support to use
HW acceleration, which needs to be called under PSA driver wrapper
in mbedtls 3.x.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add kconfig CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT to get more mbedtls
functionality for enterprise and DPP.
Split cmake sources related to hostap SME and crypto backend.
Default backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO use internal crypto
and some mbedtls apis.
Backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT use most mbedtls apis
and PSA apis, except some apis no longer supported in mbedtls 3.x,
or called in the middle of hostap and mbedtls.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
When the encoder button was pressed, it would send a LV_KEY_LEFT/RIGHT
instead of a LV_KEY_ENTER event.
This clears the enc_diff field, and set the key field to LV_KEY_ENTER
for button events.
Fixes#73529
Signed-off-by: Lorenz Clijnen <lorenz_reclame@outlook.be>
As of Mbed TLS 3.6 (which is the currently used version in Zephyr)
Blowfish, ARC4 and MD4 are no more supported so existing kconfigs
have no effect at all. Moreover they are not even used anywhere
in Zephyr.
This commit just removes them all and it also updates the migration
guide document.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
