Device adapter strips all whitespace from output lines causing test
failures when matching default shell prompt "uart:~$ " with trailing
space. Update _handle_device_output to only strip line endings (\r\n)
while preserving whitespace required for prompt detection.
A testcase sample.pytest.shell.no_vt100 was added to verify prompt
matching works with CONFIG_SHELL_VT100_COLORS disabled.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This patch changes the functions unsed in the subsys demo that are part of
the api map to anticipate their deprecation.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add a new option to control the behavior of sw0. This option also allows
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes an issue introduced with commit
c6ad4a7927 which wrong restarts
advertising after a device connects when it should only restart
advertising if a device fails to connect
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
With changes introduced in commit 6a3602a306
("net: buf: Clear `user_data` on allocation")
our memset() calls are redundant.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If/when "zephry,entropy" is enabled CONFIG_ENTROPY_GENRATOR is
automatically enabled, therefore enabling the corresponding
platform entropy driver. On some platform this is a problem
because the entropy driver is not used directly as random
source, but only to seed the ctr-drbg algorithm provided
by Mbed TLS. Unfortunately CONFIG_MBEDTLS_CIPHER_MODE_CTR_ENABLED
cannot be directly enabled because CONFIG_MBEDTLS_CFG_FILE used
in mcuboot is different from the "config-tls-generic.h" which
is required to use Kconfig symbols defined in
"zephyr/modules/mbedtls/Kconfig.tls-generic".
Moreover entropy and random number generators are not required
in mcuboot because signature verification is a
deterministic operation.
In conclusion this commit disables "zephyr,entropy" in
mcuboot DTS overlay file.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Implement a sample app to perform basic GPIO tracing.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
If GPIO tracing is enabled, then the system will track
various GPIO pin events.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
Rename "nxp,kinetis-wdog32" compatible to "nxp,wdog32" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Removed implying of NVS by the NET_L2_OPENTHREAD, and from now a
platform can choose between ZMS and NVS as a settings backend.
NET_L2_OPENTHREAD still requires NVS or ZMS backend so the config
depends on one of those.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add a function similar to sample_usbd_init_device(), but one that does
not initialize the device. It allows the application to set additional
features, such as additional descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Obviously, everyone knows that there are 8 bits per byte, so
there isn't a lot of magic happening, per se, but it's also
helpful to clearly denote where the magic number 8 is referring
to the number of bits in a byte.
Occasionally, 8 will refer to a field size or offset in a
structure, MMR, or word. Occasionally, the number 8 will refer
to the number of bytes in a 64-bit value (which should probably
be replaced with `sizeof(uint64_t)`).
For converting bits to bytes, or vice-versa, let's use
`BITS_PER_BYTE` for clarity (or other appropriate `BITS_PER_*`
macros).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
