The #81456 fixed the driver issue related to issue #81454. This add
the RTC configurations on sam_v71_xult board to enable test coverage.
Fixes#81454
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The rtc test suite uses timegm to convert a unix
timestamp to datetime, specifically struct tm which has no
nsec field, so the nsec field is not initialized properly.
Update tests to init nsec and isdst members of struct rtc_time.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
RTCs support a variety of combinations of alarm time fields, set
by the alarm time mask. Until now, alarm tests have selected
only the minute and hour fields, as these are always supported,
but some RTCs require setting every supported field when setting
the alarm time, while other RTCs don't support setting every field.
To support all RTCs in the test suite, a configuration has been
added which makes the alarm time mask configurable. Boards can now
define the specific alarm time mask they want to test within
their boards .conf files.
Additionally, the alarm tests have been refactored to not depend
on the time.h library to determine the struct rtc_time times to
set as these are constant, so they are now provided as const
structs instead.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add helper function which calculates the required calibration to
1 Hertz from the actual frequency of an RTC. This helper is both
functional and adds to the documentation of the RTC calibration
API.
The rtc.h header now includes zephyr/kernel.h instead of
zephyr/types.h as __ASSERT_NO_MSG is now referenced in the header.
The commit additionally extends the rtc_api_helpers test suite
with a test to validate the conversion function itself.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Check for ENOTSUP on alarm callback test if ALARM functionality is
enabled but callbacks are not supported
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
Adds necessary overlay nucleo_h533re in rtc_api test case
to enables the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add a timeout to the tests/drivers/rtc_api testcase so twister
can end properly when running with twister.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
RTC drivers should validate the `struct rtc_time`'s contents against the
provided `mask`. Promote this common code to a new rtc_utils file and
modify existing drivers to use this functionality. Extend the test
coverage to include verifying this behaviour.
This is groundwork ahead of adding support for the RP2040's (as used in
the Raspberry Pi Pico) RTC and alarm.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
This test uses functions which are extensions to
the C library. Let's explicity select one of the extensions
which includes it instead of relaying on somebody having
set it for this file somewhere else.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some RTCs don't support the tm_yday and/or tm_wday fields
of the struct rtc_time structure. These RTCs must set the
values of the fields to -1 if they are not supported, and
the test must be able to handle this correctly. This commit
adds an exception to the tm_yday and tm_wday fields allowing
them to be set to -1.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds overlay and conf for the qemu_x86_64 board
to the RTC API test suite, and adds support for the RTC
subsystem to the qemu_x86_64's yaml file.
The commit also specifies integration platforms for the
RTC API test suite, since the qemu_x86_64 board runs in
real-time, causing it to time out if the test suite runs
for it.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The update callback test had a bug which prevented it from
running on 64-bit architectures. This patch makes the test
agnostic to 64-bit and 32-bit architectures.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit updates the qemu_x86 board's yaml file to
indicate its support for the RTC subsystem. Board overlay
and conf for the qemu_x86 has been added to the RTC test
suite to enable the MC146818 and its dependencies.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Without this, test is run on any target, even if no RTC driver is
supported, leading to unexpected issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32 RTC driver for the new RTC API.
Can't coexist with old COUNTER based RTC
Though supported by HW, RTC_ALARM still to be supported by driver
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
Several duplicates were found with
scripts/twister -T samples/ -T tests/ --dry-run --list-test-duplicates
This is an issue since duplicated names causes overwriting of
results. Most duplicates looked like obvious copy-pase errors.
New names where addopted looking at other tests in the same yaml
or looking at the directory/descriptio.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test suite was limited to the native_posix board,
now it is built and run for any board supported by CI.
The native_posix yaml files for both 32 and 64 bit
boards have been expanded to support rtc, allowing CI
to build and test the rtc_api test suite against the
native_posix and native_posix_64 boards.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This test suite validates the RTC API helper
functions, like currently, and exclusively, the
rtc_time_to_tm() helper function.
It also validates that the struct rtc_time is
member to member compatible with the struct tm
from the tm_sec to and including the tm_isdts
member.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
The emulated RTC device driver is used to emulate a real
RTC device. Note that it is not a replacement for the
native_rtc module, which is used to control simulated time,
get time from the host system, etc.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This test suite adds tests for the following:
- Setting and getting time
- Validating time is incrementing correctly
- Validating behavior of alarms with callback disabled
- Validating behavior of alarms with callback enabled
- Validating update callback
The test suite uses the devicetree alias rtc to find
the device to test.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
