With the update to v9.2.0 several Kconfig symbols were renamed or removed.
Adjust the test accordingly. Also several constants were renamed, rename
those also.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Enable this test which runs in native_posix_64 in
native_sim(_64), and set default test platform
to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Changes the Kconfig symbols for the sys_heap based memory management option
and removes the notion of `BLOCKS` with a more concise single
`LV_Z_MEM_POOL_SIZE` option. Also adds `LV_MEM_CUSTOM` to the lv_conf.h,
since in any option the memory management is considered to be custom.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Load the default screen before the deleting the newly created one.
This used to work in LVGL 8.2.0 but was not intended according to the
discussion in https://github.com/zephyrproject-rtos/zephyr/pull/53974.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We're now using the Kconfig copied from the upstream lvgl repository. It
uses the LV_ prefix for all options while we're using LVGL_ for
Zephyr-specific ones. Make the latter consistent with upstream but also
make sure they're distinct from lvgl's by using LV_Z_ as the prefix.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Start using the upstream Kconfig from LVGL and move the glue code out
of the zephyr tree and put it under lvgl/zephyr/ in modules.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
This updates the lvgl in-tree glue code to work with version v8.1.0 and
bumps the west manifest accordingly.
The following are the most significant changes:
- The logging callback has changes in lvgl and no longer provides the
caller with an integer log level code. We now need to parse the log
string's prefix to determine the level.
- Several Kconfig options (mostly for default values of various settings)
have been removed because these values are no longer configurable in
lvgl.
- The library no longer performs a deep copy of the display and input
device driver structs, so these must no longer be allocated on the
stack in the init func.
Other than that it's mostly about renaming of various structures and
functions and adjusting the calls if function's signatures have changed.
This patch allows all in-tree users to work correctly but it's likely
it doesn't support all new widgets and layouts added in lvgl v8. These
however can be added gradually once this is upstream.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Current lvgl code allows to use the kernel heap for dynamic memory
allocation. The k_heap API doesn't however provide k_realloc() which
will be needed in order to update lvgl to v8. Nico suggested there's
no good reason for lvgl to use k_heap and it should stick to either
the libc's allocator or depend on its own private sys_heap.
The alternative would be to extend the k_heap API to provide k_realloc()
but this may be tricky for several reasons and for now there would
be a single user anyway.
This removes the choice of using k_heap for lvgl and renames the user
pool to SYS_HEAP in Kconfig and makes it the default option.
The prj.conf for the lvgl sample is modifed to specify the number of
memory pool blocks instead of the total size as the default block
size is 2048 and it results in the same size of memory.
Suggested-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Align all Kconfig option names with LVGL names. The followed rule:
LV_(.*) -> CONFIG_LVGL_(.*).
Also replaced LVGL boolean configuration entries using if/else/endif
with direct IS_ENABLED macro.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
