Removed implying of NVS by the NET_L2_OPENTHREAD, and from now a
platform can choose between ZMS and NVS as a settings backend.
NET_L2_OPENTHREAD still requires NVS or ZMS backend so the config
depends on one of those.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The setting is deprecated so change the code to either use the
native zsock_* API or enable POSIX_API to use the BSD socket API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Acknowledgment is mandatory if legitimately requested by the package's
"ACK requested" flag. The L2 layer will have to ensure that compliant
ACK packages will always be sent out automatically as required by the
standard.
For IEEE 802.15.4 compliance, the NET_L2_IEEE802154_ACK_REPLY option is
therefore being deprecated.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
There is no reason why the default size should be 2,
because an event is only a combination of
{uint32_t + void*} + info
Using 2 as default causes a high risk of loosing events,
setting the default to a more sensible value of 5 still
restricts memory usage but keeps it more safe.
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
RD-Client is essential part of LwM2M specification and it can't
be disabled from LwM2M engine. This commit deprecates Kconfig
variable CONFIG_LWM2M_RD_CLIENT_SUPPORT and removes
all usages if it.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Added support for handle case when all data is not possible to
add in 1 message for Send and Observed Notification.
Notification continuous pending timeseries data is triggred
by iMIN attribute.
Send Operation generate continuous message in multiple lwm2m
message.
Normal Read by server only report back latest stored data.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The crypto driver is used internally, so there's no real need to expose
its name as a Kconfig option. Just drop it in favor of a plain string
with the same previous value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC1200_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
In this case, the driver already had bindings, however, it was still
using NET_DEVICE_INIT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move driver to use {NET_}DEVICE_DT_INST_DEFINE. This lets us
remove the IEEE802154_CC2520_DRV_NAME Kconfig symobl.
We also update the ieee802154 build_all test to actually enable
the CC2520 driver.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove NET_TCP_BACKLOG_SIZE from KConfig and from test,
because it's not present anymore in current version of TCP stack.
Signed-off-by: Andrey Dodonov <Andrey.Dodonov@endress.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Even though bash is commonly available as /bin/bash there are
exceptions (e.g NixOS). This commit allow the use of the scripts in my
environment and is generic.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The device already has a DT compatible (and uses DT properties).
Instantiate the device using the DT-based macros and remove hardcoded
name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for the gateway object [EXPERIMENTAL] used by the
MG100, BT510, and BT610 LwM2M demo.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
LwM2M was not covered by networking build all test, leaving an opening
for possible regression in modules that are not enabled by default in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
