These tests are quite sensitive to the exact random sequence.
After a change of the native_sim entropy generation 2 of them
started failing. Let's set a random seed which avoids the failure.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
All immediates in RISC-V are encoded as two's complement. This commit
adds a test for relocating jumps that utilize the full range of the
immediate, in both positive and negative direction.
To this end, the test uses the compressed b-type (CB) instruction to
branch to its maximum negative (-256) and maximum positive (+254)
targets.
In case of test failure, expect relocating the corresponding llext to
fail.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
Mostly a revert of commit b1def7145f ("arch: deprecate `_current`").
This commit was part of PR #80716 whose initial purpose was about providing
an architecture specific optimization for _current. The actual deprecation
was sneaked in later on without proper discussion.
The Zephyr core always used _current before and that was fine. It is quite
prevalent as well and the alternative is proving rather verbose.
Furthermore, as a concept, the "current thread" is not something that is
necessarily architecture specific. Therefore the primary abstraction
should not carry the arch_ prefix.
Hence this revert.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix platform radio state machine to be compliant with one shown in
OpenThread's `include/openthread/platform/radio.h`
Align twister tests to verify proper behavior of the
state machine.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
It would time out when run on-device due to the NVS setting backend being
incredibly slow once enough entries exist.
Also, rename the tests which use different store implementations to make
that explicit.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/83210.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The commit changes requirements for stream_flash_init, where size
can no longer be 0 and has to be explicitly set, to avoid situation
where size autodetection, invoked by size == 0, would miss changes in
layout and silently allow overflow of Stream Flash into other partitions.
There has also been new Kconfig option CONFIG_STREAM_FLASH_INSPECT,
set to y by default to keep legacy behaviour, that can be used to turn
off stream_flash_ctx vs device inspection, allowing user to shed
inspection code once it is not useful anymore.
Fixes: #71042
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Improve platform filtering of common platforms, replace extra_args
with extra_configs, where applicable and add little comment on why
certain options are used.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The simple path and naming wasn't really right, there are no other tests
and the test suite has become quite automated and extensable to cover
most things we'd like to test with llext. Building, loading, and linking
of course.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add overlay property node and configs to support tests/subsys/fs/ext2,
tests/fs/fat_fs_api and tests/subsys/sd on RA8 boards
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
The commit adds Kconfig option CONFIG_STREAM_FLASH_POST_WRITE_CALLBACK
that allows to turn off support for callback invoked after data
is written to storage device.
If the feature is not used disabling it allows to save some storage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
when performing a write ZMS checks if the data exists in the storage to
avoid double writing the same data and save some memory cycle life time.
However this downgrades the write performance.
Enable this feature only when CONFIG_ZMS_NO_DOUBLE_WRITE is enabled.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Add MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG to the list of
test Kconfigs. Typical use case of this:
- the platform has "zephyr,entropy" defined in the devicetree which means
that CSPRNG_AVAILABLE is set;
- for some reason the board actually does not have any entropy driver
enabled (ex: ENTROPY_BT_HCI is disabled in nrf5340bsim when BT is _not_
enabled in the build);
- since TEST_RANDOM_GENERATOR is enabled then also TEST_CSPRNG_GENERATOR
would be;
- unfortunately the call to psa_generate_random() would fail in
get_random_data() (in modules/mbedtls/zephyr_entropy.c) because
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG is not set and it would
not reach "subsys/random/random_test_csprng.c".
This commit fixes this problem.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The DSP library does not provide functions to convert fixed
representations (Q7,Q15,Q31) to float or double and viceversa. This commit
implements those functions using a shift argument to indicate the number
of decimal places.
Signed-off-by: Matías Román Camilletti <matias.camilletti@owl-services.com>
Test LLEXT "detached section" functionality. This adds a test to load
an extension with a function placed in an ad-hoc section and run a
function in it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a test scenario for the ITS store module implementation that uses
ZMS for storage.
Reorganize the others at the same time.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
It becomes the new default when the secure_storage_its_partition
devicetree chosen property is defined as it is a preferred alternative.
See the help message of the
`CONFIG_SECURE_STORAGE_ITS_STORE_IMPLEMENTATION_ZMS` Kconfig option
for more information.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Some ARC processor configurations have separate memory for code (ICCM)
and for data (DCCM). Such configurations are unsuitable for LLEXT,
except for some quite special cases. For now, disable LLEXT and its
tests for these devices completely.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Now that `CONFIG_RTIO_SUBMIT_SEM` is the default option, testing the
alternate code path requires explicitly disabling it.
Signed-off-by: Jordan Yates <jordan@embeint.com>
There is no reason the syscall tests should not be perfomed on
relocatable builds. This made some test runs pass even though
issues were present in those configurations.
Remove the build gate.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add support for handling optimized short log messages (aka turbo logs).
There are 2 types of turbo log messages:
- No arguments. D16MTS is used for that on channel > 32768
- One numeric argument. DM16 followed by D32MTS is used.
Additionally, in order to be able to get source name for log messages
coming from owned by cpuapp co-processors (PPR and FLPR) there must
be a way of passing location of constant source data from PPR/FLPR to
cpuapp which handles ETR data. This method is added in the commit as
well. PPR/FLPR sends D32M during the boot with address of constant
source data section. Demultiplexer stores those addresses and it is
able to retrieve source name for log messages from PPR/FLPR.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
now that CONFIG_POSIX_C_LANG_SUPPORT_R will
add a custom implementation for gmtime_r() if that
is not provided by the toolchain, we can simply depend on
that, instead of using out own.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When "zephyr,entropy" is enabled the corresponding entropy driver is
pulled in the build and initialized during boot. This
- changes the initialization sequence expected by "check_init_priorities";
- add one extra device to the expected list in "shell_device_filter".
Therefore this commit removes the "zephyr,entropy" propery to return the
test to the original state.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Update events to use uptime ticks, which is a monotonic clock which
in the same res as kernel ticks. This makes comparisons simple and
removes the complexity of dealing with wrapping counter values.
The wrapping is particularly problematic for events since this makes
it quite complex to track if an event has occured in the past, or
will occur in the future. This info is needed to know if an event
has actually been handled or not.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The commit removes flash_area_open usage from tests, where it is not tested
and only used to obtain area.
The commit adds tests for flash_area_device_is_ready.
The commit adds test for flash_area_sectors, which is equivalent
of flash_area_get_sectors but takes flash area object instead of flash
area index.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The PSA Crypto implementation provided by Mbed TLS generally requires
some amount of heap to function, so enable the arena unconditionally
to make the test compatible with MINIMAL_LIBC configurations where the
arena is disabled by default.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
If nrf52840dk/nrf52840 is an integration platform, it should also be an
allowed platform, otherwise the test run breaks down.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
The commit removes storage.stream_flash.mpu_allow_flash_write as it was
pointless, and moves nrf52840, as integration platform, to
storage.stream_flash.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes flash_area_open usage from tests, where it is not tested
and only used to obtain area.
The commit adds tests for flash_area_device_is_ready.
The commit adds test for flash_area_sectors, which is equivalent
of flash_area_get_sectors but takes flash area object instead of flash
area index.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Don't duplicate the test's output running it on `native_sim` after
`LOG_BACKEND_NATIVE_POSIX` was enabled by default (bd9836be8c)
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Some code that automatically gets embedded on some platforms relies
on having `CONFIG_TIMEOUT_64BIT` enabled.
Do not force disabling that Kconfig option in the test configuration,
as that will make the test fail to compile on those platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
