TI Platform drivers are named according to coresponding
names in Linux kernel, thus add the legacy drivers (DaVinci,
OMAP) also under TI K3 platforms.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Transitioning maintainership of Arm from @ithinuel to @wearyzen.
Many thanks to @ithinuel for your contributions and
dedication to this area.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Move the contents of Kconfig.iso to the common Kconfig
file.
The main reason for this is that the Kconfig.iso filename
has caused issues for some, due to the .iso filename extension.
The contents have been moved to right after the Kconfig options
for BT_CONN which are quite similar.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The LLEXT Extension Development Kit, mostly implemented in
'cmake/llext-edk.cmake', is already part of the 'llext' area of the
MAINTAINERS file, but its test is currently unowned.
Add the missing directory to the 'llext' area.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
I will be working on non-bluetooth topics, so removing myself as a
maintainer for the bluetooth groups
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Revert to my old username on west and drop my long-inactive LED strip
involvement.
(I'm intentionally not adding myself back to the devicetree
collaborators list -- I'm not able to help out there at this time.)
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
Devicetree maintainers probably do not need to be pulled in for
dts/bindings/ folders that are found in various tests and samples
directories, the purpose of these lines was only for the top level
dts/bindings/ folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add @asm5878, @HoZel and @benothmn-st as collaborators on
"STM32 Wireless Platforms" and "West project: hal_stm32" where they
will take care of ble related libraries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add a new "STM32 Wireless platforms" area split from existing
"STM32 platforms".
STM32 Wireless covers STM32 BLE areas:
- STM32WB* based ST boards
- STM32WB* drivers/bluetooth/hci drivers
- STM32WB* soc/st/stm32
Additionally, the following domains are added to STM32 Wireless platforms:
- BlueNRG drivers/bluetooth/hci drivers
- shield x_nucleo_bnrg2a1, x_nucleo_idb05a1 and x_nucleo_wb05kn1
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add a separate entry for HTTP related code so that we can have
separate maintainers/collaborators than general networking area.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This change adds @wearyzen as a collaborator to:
- ARM arch
- ARM Platforms
- West project: mbedtls
- West project: trusted-firmware-m
- West project: tf-m-tests
- West project: trusted-firmware-a
- West project: psa-arch-tests
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Remove danieldegrasse from NXP maintainers areas.
Substitute myself for the hal_nxp west project area.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add an area specifically for the MCUX shim USB drivers,
as this code is primarily maintained by a subset of the NXP Driver
maintainers. Move MarkWangChinese to this area.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add an area specifically for the NXP WIFI driver code,
since this code is maintained by a different set of people
than the generic NXP Driver maintainers.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Contributed some of the following to HCI (UART) samples:
Vinayak Kariappa Chettimada (20):
Bluetooth: hci_uart: reduce configured stack sizes
samples: Bluetooth: Add configuration file for all controller features
samples: Bluetooth: hci_rpmsg: Fix RAM overflow building for DF feature
Bluetooth: Controller: Preliminary Central multiple CIS support
samples: Bluetooth: hci_rpmsg/uart: Fix BT_CTLR_ISO_TX_BUFFER_SIZE
Bluetooth: Controller: Fix connected ISO dynamic tx power
Bluetooth: Controller: BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU
samples: Bluetooth: hci_uart: Add preliminary support for nrf54l15pdk
samples: Bluetooth: hci_uart: Use lower IRQ priority SoC peripherals
samples: Bluetooth: hci_uart: Add preliminary DF support for nrf54l15pdk
samples: Bluetooth: hci_uart/hci_ipc: CI coverage for nRF53+nRF21 FEM
samples: Bluetooth: hci_uart: CI coverage for nRF5340dk cpuapp
samples: Bluetooth: hci_uart: CI coverage for nRF52+nRF21 FEM
samples: Bluetooth: hci_uart: CI coverage for nRF52840
samples: Bluetooth: hci_uart: CI coverage for nRF52dk
samples: Bluetooth: hci_uart: CI coverage for nRF52833 DF
samples: Bluetooth: hci_uart(_3wire)/hci_ipc: Enable PAST feature
samples: Bluetooth: hci_uart hci_ipc configuration update
samples: Bluetooth: hci_uart hci_ipc configuration update
Revert "Bluetooth: controller: remove refs to LLCP_LEGACY after rebase"
Contributed some of the following to Host:
Vinayak Kariappa Chettimada (2409):
Bluetooth: SMP: Fix unaligned access usage fault.
soc: Use nrf.h instead of nrf52.h and nrf52_bitfields.h
Bluetooth: Fix race condition between ecc_send and ecc_task
...
Contributed some of the following to Host ISO:
Vinayak Kariappa Chettimada (2):
Bluetooth: host: iso: Fix typo in hci_le_big_terminate
Bluetooth: HCI: Rename to bt_hci_iso_sdu_hdr and bt_hci_iso_sdu_ts_hdr
and attends the weekly Bluetooth Zephyr meetings.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Follow the wider directory convention of dts/<arch>/<vendor>/<family>.
This is foundation work ahead of introducing support for the RP2350.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Now that OSAL code is moved form hal_nordic to nrf_wifi, update the
entries to reflect the same.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add myself to the ARC collaborators list, as I'm currently employed
by Synopsys to work on improving ARC support in Zephyr.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
- Remove @julius-barendt as collaborator and code owner for areas
related to SPARC and LEON.
- Add myself to the same areas.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Following the naming convention add an underscore and update path in the
maintainers file too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Replacing "area: Networking" with "area: PTP" to prevent from
including myself in issues and PRs that are related to every
piece of Networking code. Insted I'll be included only in PTP
related issued/PRs.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
The NXP PORT pinmuxing peripheral is reused across the MCX, S32, and
Kinetis lines. Rename the compatible from the family-specific
nxp,kinetis-pinctrl to a more generic nxp,port-pinctrl to reflect the
actual name for the IP block used within reference manuals.
Update the NXP HAL revision to include a change to use the new Kconfig
name for the PORT pinctrl driver
Update the MAINTAINERS.yml path, as there are no longer any NXP drivers
matching the string "drivers/*/*kinetis*
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The API directory really isn't the best place for shell
documentation, which isn't API.
Created a new directory for Bluetooth shell documentation
and moved the ISO and LE Audio docs in there.
The existing bluetooth-shell.rst file was also split into
several new files, so that it follows the same structure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Without this change, `get_maintainer.py path ...` did not return a SiM3U
specific maintainer information when querying for
include/zephyr/dt-bindings/pinctrl/si32-pinctrl.h.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
