Aaron Massey (aaronemassey - Google) doesn't have the cycles to remain a
maintainer on the charger subsystem. Robert Zieba (GRobertZieba - Google)
has been participating as a collaborator for the charger subsystem.
Remove aaronemassey as a maintainer of the charger subsystem and add
GRobertZieba as a collaborator.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Introduce MIPI DBI driver class. MIPI DBI devices encompass several
interface types. All interfaces have a data/command, reset, chip select,
and tearing effect signal
Beyond this, MIPI DBI operates in 3 modes:
Mode A- 16/8 data pins, one clock pin, one read/write pin. Similar to
Motorola type 6800 bus
Mode B- 16/8 data pins, one read/write pin. Similar to Intel 8080 bus
Mode C- 1 data output pin, 1 data input pin, one clock pin.
Implementable using SPI peripheral, or MIPI-DBI specific controller.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Few west areas are paired with the sensor labels right now, this causes
the issue assignee workflow to assign sensor issues to the maintainers
of these areas as well.
Drop those areas from the maintainer file, they should get some
different label if needed.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Typo in a files-exclude entry is causing get_maintainer.py script to
error out under certain conditions
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Create RA & RZ Renesas areas to maintain from previous
"Renesas platforms" area.
Moved rzt2m dtsi from R-Car to RZ area.
Add @soburi as Renesas RA maintainer.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
- Due to the incresing support for ZephyrRTOS in BeagleBoard boards, it
would be good to have this entry.
- Was discussed in Discord when asking for help for PR review
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Create NXP Drivers group separate from the platforms.
The idea being that currently there are two problems:
- All the Drivers drivers are falling under the responsibility
of the MCUX platforms' maintainers, some of whom do not have the
cycles or interest to maintain these things.
- The maintainers of the other platform groups do not get counted
as reviewers of the Drivers drivers that their platforms use.
So, separate all the driver files from the MCUX platforms, and add the
relevant people who have an interest in maintaining the Drivers, including:
- At least one maintainer of each platform group, and
- The NXP contributors who are highly active in maintaining
and reviewing the NXP drivers in upstream Zephyr.
Another two problems this PR fixes:
- The platforms of the other NXP groups are still falling under the MCUX
group. Exclude the platforms of the other NXP groups from MCUX group.
MCUX group will still be the default group for unsorted NXP platforms.
- Add a few file paths to some of these groups to cover a few missed
files, and add description properties of the NXP groups.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Split out the HCI drivers from the main Bluetooth sections.
The contributors to those are usually silicon vendors.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is the "legacy" Bluetooth protocol.
lylezhu2012 (NXP) recently volunteered to maintain it.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add myself (decsny) as ethernet/mdio collaborator.
I have taken an interest in ethernet and am currently
maintaining and writing some ethernet/mdio drivers for NXP,
and would like to use the collaborator role to monitor the
zephyr activity of the ethernet/mdio subsystems.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
In order to avoid build failures as described in issue #67242,
make all ST drivers using HAL_ST module dependent to HAL_STMEMSC
and HAS_STLIB libs, which need to be configured in all samples
referring to them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Gigadevice was inconsistent with the convention established by other SoC
families, that is, use <vnd_prefix>_<family>. For example, ST STM32 uses
st_stm32. Note that GD32VF103, under soc/riscv, has already been
adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Current setting missed some necessary files which should be
covered by Ambiq platforms. Add them in this commit.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Move things out from riscv-privileged, and create the new RISC-V GD32
family. New family folder follows the <vnd>_<family> naming convention.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Move various utilities out of lib into own folder for better assignement
and management in the maintainer file. lib/os has become another dumping
ground for everything and it the Kconfig and contents in that folder
became difficult to manage, configure and test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Gone through orphaned files and added those to relevant areas and
created new areas. Initially, some of the areas have the minimal
required data, i.e. without maintainers or collaborators which can be
filled in later.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just in an effort to reduce notifications in areas that I'm not
super actively involved in. I was getting a lot of false
positive notifications for sensors.
Feel free to ping me for individual reviews on
simplelink parts or TI HAL or radio drivers.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Moved folder to tests/boards/native_sim from native_posix
(including updating the MAINTAINERS file)
And enable all these tests for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add Nuvoton guys, TomChang19 and alvsun, in collaborators of Nuvoton
NPCX Platforms and remove MulinChao and ChiHuaL since they are already
the maintainers.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Adding myself as a collaborator on ARM arch so that I can help maintain
the aarch32 cortex-a/r codes.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
All in-tree touchscreen drivers have been migrated over to input, the
compatibility node has been removed from those boards as well, this
sample can be dropped now.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This separates demand paging related headers into its own file
instead of being stuffed inside the main kernel memory
management header file.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the k_* memory management functions from sys/ into
kernel/ includes, as there are kernel public APIs. The z_*
functions are further separated into the kernel internal
header directory.
Also made a quick change to doxygen to group sys_mem_* into
the OS Memory Management group so they will appear in doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds the RISC-V Platform-Level Interrupt Controller driver to
the RISC-V area of maintenance.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add a missing c-file (buf_simple.c) and use a dedicated label for
Networking Buffers. Also add explicit excludes of the same files to the
Networking section. Without the dedicated label it seems that the wrong
maintainer gets set as assignee for pull requests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tomasz is actively involved in Zephyr's ACPI support, so add him as a
collaborator to the subsystem.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the documentation for high-level CAN protocols (for now only covering
ISO-TP) from the peripherals section to the connectivity section.
This matches the layout in code, where the CAN controllers are under the
drivers/can directory and the protocols are under the subsys/canbus/
directory.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds a new entry for multi-function device (mfd) drivers to ensure that
incoming PRs to this area get labeled appropriately and have reviews
requested.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
This commit adds the `dts/riscv` directory to the `RISCV arch` area of
maintenance. Right now, RISC-V devicetrees are covered only by
platform-specific areas (Espressif, ITE). When other RISC-V platform
devicetrees are affected in a PR, it is left unassigned.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Only adds basic build support using Zephyr. Crypto support is disabled
till the MbedTLS integration is complete.
Signed-off-by: Sridhar Nuvusetty <sridhar.nuvusetty@nordicsemi.no>
Signed-off-by: Sachin Kulkarni <sachin.kulkarni@nordicsemi.no>
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Adding myself as maintainer and Anas as collaborator on code samples,
for which an area already exists in Github
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Become the maintainer for the jwt/json code. The json code has been in
tree for a while, and I am the author of the jwt code.
Signed-off-by: David Brown <david.brown@linaro.org>
Release notes and migration guides go hand in hand right now, put the
file under the "Release Notes" area and exclude it from the normal
"Documentation" one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes: #63738
Create dedicated entries for ARC MWDT, arm compiler 6, and one Api
toolchains.
This helps contributors to identify whom to contact in case of issues
related to those toolchains.
The Zephyr SDK, cross-compile, and other GCC based compilers are covered
as part of the general cmake/toolchain,compiler,linker,bintools entry in
the MAINTAINERS file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This small library is shared by both west and twister, where it's used
to parse the `domains.yaml` files generated by sysbuild. It also defines
the schema that sysbuild itself must adhere to when generating the file.
`domains.py` used to be located in `scripts/west_commands/`, which means
that it once belonged under "West". Having one file appear in multiple
areas is discouraged, so let's just move it back to "West".
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Adds to the maintainers file the llext subsystem making myself the
maintainer and Guennadi Lyakh a collaborator.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
As we will now we having more nrf5*_bsim boards defined in this
same folder, the old folder names became missleading.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The names have underscores within them. Somehow it was still being found
within the build but not with building documents. This renames them to
the correct name.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
He has contributed time synchronization services and some bug fixes in
the past and is going to work con Class B support in the future.
Signed-off-by: Martin Jäger <martin@libre.solar>
Previous maintainer Mani-Sadhasivam is presumably busy with other work
and has not been very active in Zephyr recently.
JordanYates has reviewed all recent PRs and driven the discussions
around LoRa/LoRaWAN, so he should become the new maintainer.
Signed-off-by: Martin Jäger <martin@libre.solar>
The driver is bound to the module, there's no separate platform, so
let's just add the driver path to the module area so that changes for it
gets tagged and assigned.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit adds the DFM (DevAlert target side code) module and
moves the TraceRecorder module into the percepio module, which
results in the TraceRecorder module definition being removed
from the west manufest and module definition within zephyr.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
Add shield definition for the TI TCAN4550EVM, an evaluation module for the
TI TCAN4x5x CAN controller series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add tests/bluetooth/audio/ to Bluetooth Audio and Bluetooth
to properly label changes and add Thalley as maintainer of
them.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When IEEE 802.15.4 maintainership was updated in ec98555f42 the L2 part
was missed. Proposes to assign both L1 and L2 to the same persons.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds a new gPTP maintenance area and proposes to add @fgrandel as a
collaborator thereof as proposed by @jukkar.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The manifest-<module> GitHub labels are automatically added by the
manifest workflow whenever a PR modifies the revision of a project in
the manifest file. This allows users to filter by PRs that modify
revisions of particular projects, which is a useful feature.
The MAINTAINERS.yml file had assigned manifest-<module> labels to the
areas corresponding to west projects, which means that Pull Requests
that modify glue code or otherwise code in the main repository that is
assigned to that entry (mostly code in modules/) currently get labeled
with the manifest-<module> label. Fix this by not using those labels in
the MAINTAINERS file anymore.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With the new segment of tests having its own directory, it needed to
be added to the Twister segment of MAINTAINERS.yml.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Adds new ADI Platforms section covering device drivers and bindings for
Analog Devices, Maxim Integrated, and Linear Technology.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Move CMSIS module Kconfig options to a folder, in preparation for CMSIS
core header creation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adding myself as collaborator in various networking related areas
that I was working with earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adding myself as code-owner since I am at this point the primary author
of, and actively maintaining conn_mgr.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add myself (decsny) as collabotor to SD subsystem to help
to maintain the eMMC support which I added to Zephyr last year.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Bluetooth HCI drivers, Bluetooth services and the Bluetooth shell can be
considered part of the Host. Move the paths to the Host entry so that
the "Bluetooth Host" label is applied to PRs that change files in those
paths.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Merge both Renesas R-Car platforms
Add Mykola to collaborators
Remove Pierre from collaborators
Update CODEOWNERS file for all renesas r-car related files
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
To better delimit renesas ranges dts, we need to use ranges folder.
It will also help maintainers to better delimit their files to
be notified about.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Force all AM6-based boards to start with 'am6' which allows to
place all boards for the same SoC next to each other. The 'ti_'
prefix would end in spreading boards all over the board directory.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add Peter van der Perk and Benjamin Perseghetti to NXP
collaborators for NXP Platforms and NXP HAL.
Also the new vmu_rt* board path to NXP Platforms group so PRs are
properly assigned.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
As the cadence uart, has no off-the-shelve microprocessor out there.
Add a build only test case for the cadence uart using the qemu cortex
m3 as the board.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
I'm using a new account now.
Do the corresponding CODEOWNERS change just for consistency as well.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Fix various incorrect maintainer file entry for directories. These
are currently matching files, but would break few scripts if we were to
upgrade the CI image to Python 3.11 due to a change in behavior of
Path.glob().
Fixes various:
MAINTAINERS.yml: glob pattern '...' in 'files' in area '...' does not
match any files
on machines running Python 3.11 or newer.
Link: https://docs.python.org/3/library/pathlib.html#pathlib.Path.glob
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The correct paths are soc/xtensa/espressif_esp32
and soc/riscv/espressif_esp32, not soc/xtensa/esp32
and soc/riscv/esp32.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
The Keystone 3 (K3) family encompasses a wider variety of SoC's.
This aligns the soc/arm64 naming with the soc/arm directory.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Renesas R-Car ARM64 platforms entry has been added to maintainers list.
lorc (Volodymyr Babchuk <volodymyr_babchuk@epam.com>) will be a maintainer
of the Renesas R-Car boards based on ARMv8.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Acked-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Add myself as a maintainer for TI HAL layer (hal_ti),
this update was missed while changing the maintainer details
for the rest of TI platforms.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
TF-M will be maintained by d3zd3z moving forward. This PR also includes
some cleanup to the collaborator list of subsystems and modules related
to TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Update the native posix area to cover also the native simulator,
and fix the drivers include path pattern, as some do not have the
whole native_posix in their name.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Introduce a new area of maintenance for the IEEE 802.15.4 native stack
as distinguished from both, IEEE 802.15.4 drivers and OpenThread and
more specialized than generic network subsystem maintainership.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Drop the collabors entries that were already in maintainers (no need for
the dup), change the board expression so that it matches both ITE boards
currently in the repo.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an input build_all test with a bunch of input driver, move the
ft5336 one out of sensors as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This looks a bit lost in its own USB-C chapter,
move it to USB under the Power Delivery heading.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Mostly moved and reorganised content to the Connectivity chapter,
separated API references. Fill in some gaps in the USB device
documentation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a new _test_ that is used to build all regulator drivers. SoC
regulators, such as Raspberry Pi Pico core supply are excluded as they
are typically built as part of the platform.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With significant contribution to MCUmgr that brought increased
upload speeds and various other improvements in RAM and CPU usage,
general improvements in MCUmgr architecture and documentation,
Jamie has shown his vision for the subsystem and therefore
lets welcome him as a new MCUmgr subsystem maintainer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit adds the "area: Coding Guidelines" label to the "Coding
Guidelines" area.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit adds more coding guidelines and code style-related files to
the "Coding Guidelines" area; most importantly, it adds the coding
guidelines document itself (`doc/contribute/coding_guidelines/`) to the
area.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Since I've been working on device.h for a while, I propose to become the
maintainer of the device driver model in Zephyr.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move the build-only test for the MCP2515 CAN controller driver to the
tests/drivers/build_all/can/ folder.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
I am no longer able to act as GPIO subsystem maintainer. I would like
to degrade my role to collaborator.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The babblesim tests for bluetooth have been moved to a new folder.
To ensure that the proper people still get involved this PR adds
the bsim/tests/bluetooth/ll folder to the bluetooth controller section
and similar for the mesh babblesim folder
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Today these scripts are orphan. Let's better set them
as owned by the nrf52_bsim maintainer.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Bsim won't be limited anymore to BT tests.
In preparation for adding more tests in network areas
swap the tests/bluetooth/bsim with tests/bsim/bluetooth
There is no other changes in this commit beyond that.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
At the moment all Intel drivers get label Intel ADSP. Correct to match
only "intel,adsp*".
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit adds a maintainer and a collaborator to the "platform:
SiLabs" area. It also changes its status to "maintained".
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
After the introduction of the renesas smartbond family the scope of dts
files needs to be limited to the rcar subfolder.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add myself as maintainer of hash utilities which currently
encompasses hash functions and hash maps (hash tables).
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Since I contributed Zephyr's SD rework, and SDHC drivers are currently
marked as orphaned, make myself the maintainer.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- Remove Gerson Fernando Budke (@nandojve) from maintainers
of Cypress sources.
- Add Nazar Palamar (@npal-cy) as collaborators for
Infineon/Cypress sources.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Rework the Host Command support. It includes:
-change API to backend
-change a way of defining rx and tx buffers
-fix synchronization between the handler and backend layer
-simplify the HC handler
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
These platforms are significantly different.
Add vaishnavachath as a TI Sitara Platforms maintainer.
Add gramsay0 as a TI Sitara Platforms collaborator.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
This commit separates each test by layer level.
Obviously the tests will run the whole stack, but they should be separated
by which component/layer they intend on testing.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add Marc as STM32 Platform collaborator.
Additionally add him and gautierg-st as collaborators to STM32 HAL module.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Create a new section that groups files related to the coding guidelines.
This includes documentation and code formatting configuration files.
Signed-off-by: Keith Short <keithshort@google.com>
This commit changes the release notes area maintainers to the release
managers for the Zephyr 3.4 release.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
A few POSIX arch docs were orphaned.
Add them to the native posix & posix arch entry
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a maintainer for the Raspberry Pi Pico platform, including
the RP2040 SoC, boards using it, and drivers.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Add myself as a maintainer for existing TI platforms,
currently I am an employee with Texas Instruments Inc. in
the Embedded Processors software department and has worked
on the supported simplelink platforms in Zephyr for the last
2 years.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
This commit places @stephanosio, the current CI maintainer, at the top
of the maintainer list for the "Continuous Integration" area such that
all CI-related PRs get assigned to @stephanosio.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This directory has existing LwM2M tests and tests/net/lib
has other protocols as well, so keep all in one place.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
While GitHub encourages using single account for both personal and work
purposes (even recommends merging multiple accounts into one), there are
some serious downsides when doing so.
The biggest disadvantage of using one account is the inability to select
which email address the "Rebase and merge" action will use. GitHub, at
least as of today, always uses primary email address for "Rebase and
merge" action.
Another issue is selecting email for notification based on organization.
Custom email routing can only be configured if you are organization
member (or at least outside collaborator). While this works reasonably
fine for zephyrproject-rtos organization, I cannot route e.g. mcu-tools
organization emails to my work email.
To avoid the issues I have decided to use dedicated GitHub account for
my Nordic Semiconductor related work activities: tmon-nordic
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit moves the files under `subsys/cpp` directory to the
`lib/cpp` directory because the C++ ABI runtime library and the
standard C++ library components are not a "subsystem" (aka. API) in
conventional sense and is better described as a "library."
Classifying the C++ ABI runtime library and the standard C++ library as
"libraries" instead of "subsystems" also better aligns with how the
existing C standard library implementation (`lib/libc`) is handled.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
subsys/mgmt/osdp _has_ a dedicated maintainer who will rush to address
any issues identified :)
Also, add @adakus and @r2r0 as collaborators since they are using this
subsystem in production and have agreed to review, test, and report issues
for this subsystem in future.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
This removes the tinycbor module and replaces references in it
e.g. in sample text to use the zcbor replacement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Due to an unexpected change in employment status and going back to
full-time linux kernel development and maintenance, I'm no longer able
to spend much time on Zephyr. :(
Change my maintainership status to "odd fixes" for lvgl. I would also
be willing to pass the torch on to anyone interested.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a missing ":" for "Drivers: Regulators", currently causing PR
assigner failure:
```
yaml.scanner.ScannerError: while scanning a simple key
in "MAINTAINERS.yml", line 976, column 1
could not find expected ':'
in "MAINTAINERS.yml", line 977, column 3
```
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add entry for regulator drivers. Add myself as a maintainer as I've been
reworking the whole subsystem lately, and Daniel DeGrasse as a
collaborator as he's been active in reviews and implementations.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There's now two google_* boards in the repository and it looks like we
are going to keep a common prefix for these.
Add an explicit maintainer entry for these with Keith and I as
maintainers so that PRs against these will get reviewers and assignees.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Introduce an API mirroring the CMSIS-DSP's basicmath. If CMSIS_DSP is
enabled, then it will by default be used as a backend. Developers may
opt into a custom backend by setting CONFIG_DSP_BACKEND_CMSIS=n. If
done, the application must provide `zdsp_backend/dsp.h` and optionally
implement the functions in its own .c files.
Signed-off-by: Yuval Peress <peress@google.com>
Replace Enjia with Johan for x86 platform maintenance, and add Tomasz as
collaborator for x86 platforms & arch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Simple test for API rules, allocation, queue, and dequeu
of the endpoint requests. USB device controller should not be
connected to the host as this state is not covered by this test.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add an entry in the maintainers file for the experimental fuel gauge
API. Initially mark teburd (Intel) and aaronemassey (Google) as
maintainers.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
This adds the files related to MQTT-SN, with an additional exlude
to separate MQTT and MQTT-SN.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
@attie-argentum has been collaborating with SAM0 SoC for a few
time. He seems to have good knowledge and it is motivated to
assume more responsabilities on the project. This add
@attie-argentum as a collaborator for Microchip SAM platforms.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This patch updates my status on areas where unfortunately I no longer
have time or interest to contribute:
- Removed my collaborator status from STM32, display, sensors, kscan,
PWM and hal_ti
- Downgraded my status from maintainer to collaborator for the GD32
platform
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Andrzej is no longer involved directly in Zephyr, but remains connected
to the MCUboot project. Replace his maintainership with either other
people from Nordic or leave the subsystem "orphaned" (i.e. labeled as
odd fixes).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add an entry for the release notes files so that release notes PRs get
tagged as "Release Notes", that should make them easier to manage close
to release time.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
I am not using Silicon Labs platform for a while now and will not be for
the foreseeable future.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Sample is now maintained in the SOF repository, no need for duplication.
The SoF project maintains the board configurations and SOF related
configs better than we do.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Split dts infrastructure and bindings
* Add Kumar back as a maintainer for both, and Marti just for
the infrastructure side.
Signed-off-by: Kumar Gala <galak@kernel.org>
Asbjorn will not be very involved with Zephyr
development, so moving him from maintainer to
collaborator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
By including `doc/` under the "Documentation" area we put documentation
content and infrastucture in the same basket, however, people
maintaining infrastructure is often not interested in reviewing
documentation content. This patch creates a new "Documentation
Infrastructure" area and limits its scope to infrastructure-only files
(CMake, Sphinx, extensions, etc.). I've assigned myself as a maintainer
as I've been working on such areas for a long time now. @utzig removed
from the list of collaborators as it is no longer active in this area.
Core documentation, e.g. getting started, contribute, etc. is kept under
the "Documentation" area.
Subsystem specific documentation folders/files should be added in the
respective areas (many already do).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This introduces the I3C API for I3C controllers. Currently,
this supports one controller per bus under Zephyr.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
WealianLiao is unable to support Zephyr for npcx chip for the
foreseeable future. Remove him from the MAINTAINERS file.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The majority of functions in scripts/kconfig/kconfigfunctions.py are
related to devicetree so I think its resonable to list it under
the devicetree maintained files.
Signed-off-by: Kumar Gala <galak@kernel.org>
I am still interested in contributing to the documentation, but I am
tired of the spam I'm getting from zephyrbot whenever any pull request
touches anything in doc/.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The old project, liblc3codec, is not used anymore. Rename the Zephyr
module name, folders, and Kconfig options based on the new name, liblc3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename the SocketCAN header from socket_can.h to socketcan.h to better
match the naming of the functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the SocketCAN tests from tests/drivers/can/utilities to
tests/net/socket/can to match the location of the code under test.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add an entry for uoscore-uedhoc module to the MAINTAINERS.yml file and
assign myslef and StefanHri as maintainers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Al is part of the core team working on testing & emulation at Google.
He should be added to reviews for changes pertaining to these.
Signed-off-by: Yuval Peress <peress@google.com>
Moves sof to the module area, based on that also remove maintainer, as
this was associated with SOF.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is not a sample of an audio subsystem in zephyr, it is a sample
that completely depends on sof and its audio support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds @stephanosio as a collaborator for the MAINTAINERS
file area so that he is automatically notified of any changes to the
maintainer and collaborator list and can update the GitHub permissions
accordingly.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The team listed here will be adding a lot of emulation changes and
improvements in the coming months. Since emulation is not yet
officially maintain, we'd like to take ownership.
Signed-off-by: Yuval Peress <peress@google.com>
This test has been bitrotting for a while - years, in fact. As it didn't
have a `testcase.yaml`, it wasn't being run on twister. The code expects
to be run on single thread environment, but xtensa arch currently
doesn't support that.
This patch simply removes this test - if it's deemed important, it can
be reworked and readded in the future.
Fixes#47508.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
