Enabling `CONFIG_INPUT_FT5336_INTERRUPT` if the ft5336 node in DT
has `int-gpios` property.
As a result of this change, some boards can eliminate lines that
explicitly configure `CONFIG_INPUT_FT5336_INTERRUPT`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Add `se` variant to support the low-cost CoreS3 SE.
- Add configuration files
Add `m5stack_cores3_procpu_se(.dts|.yaml|defconfig)` files.
Reorganize dts files to split common parts.
- Update .yaml file
Add gpio, can, counter, entropy, pwm, and pinmux to the supported
feature group. Remove the `ignore_tags:` section.
- Update documents
Add and modify information about CoreS3 SE.
Add more description about sysbuild.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
BUS_5V regulator is placed in the i2c peripheral, where it does
not belong. Move 5V bus regulator to board common definitions.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Use a string for the mipi-mode property over an integer value, as this
significantly improves the readability of the MIPI DBI device binding.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
* Replace copies of fixed-partitions nodes in related boards by
referencing the apropriate partition table from the available list.
* For better reference the `partitions_*.dtsi` file has boot offset,
purpose and the flash size encoded in the file name. Default flash size
is considered to be 4MB.
* Added the flash size node for the boards which are not based on the
module.
* Removed flash size registry from the esp32.*common.dtsi
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This board has a few issues handled by this PR:
- Fix DTS entries to meet necessary flash partitions
- Fix wrong kconfig entries realted to SoC model
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Initial support for M5Statck CoreS3 development board.
Signed-off-by: Zhang Xingtao <zhxt@live.cn>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Co-authored-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This updates the documentation of all the M5Stack boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This adds zephyr,touch property to boards with touch controllers, analogous
to `zephyr,display`.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
HEAP_MEM_POOL_ADD_SIZE_BOARD is not a zephyr-defined entry and
should be placed into Kconfig instead of Kconfig.defconfig.
This PR moves that entry for all ESP32-based boards accordingly.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR updates all Espressif board names to meet its
original value. It also update reference links, re-organize
entries and removes unused content.
This also fixes bootloader information regarding a few boards.
IDF Bootloader was removed and these boards kept that info.
This updated it accordingly with the Simpleboot Bootloader.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The commit ad63ca284e replaced
default value of 65535 to UINT16_MAX. That change might cause
confusion as it suggests that the HEAP size is limited to UINT16_MAX.
For this particular scenario, 65535 bytes is a resonable amount of
HEAP to allow both Wi-Fi and BT working in coexistance, which could be
increased as per application.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Convert ST7789V display driver to use MIPI DBI API. This commit also
updates in tree boards to use the new devicetree syntax needed to enable
this display with the MIPI DBI API.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The drivers should be independent after the move to the new HCI driver
API. Having them as a choice also has unexpected consequences with some
drivers being unexpectedly enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The RTC subsystem in espressif's SOCs, among other tasks
is responsible for clock selection for CPU and for low
power domain clocks such as RTC_SLOW and RTC_FAST.
This commit allows for proper clock source and rate
selection for CPU, using the espressif,riscv and
espressif,xtensa-lx6/7 bindings.
It also enables clock selection for RTC_FAST and RTC_SLOW,
that impacts some peripherals, such as rtc_timer.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Remove all CAN controller "bus-speed" and "bus-speed-data"
properties. These all use the default bitrates set via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Source code of board/m5stack/m5stickc_plus and
board/m5stack/m5stack_atoms3_lite were adapted for an inital
support of the M5Stack ATOM Lite board.
Signed-off-by: Nikola Trifunovic <nikola@trifunovic.at>
Move the Kconfig symbols SOC_ESP32_PROCPU, SOC_ESP32_APPCPU,
SOC_ESP32S3_PROCPU, and SOC_ESP32S3_APPCPU.
The CPU cluster is defined in espessifc/soc.yml and should therefore
be available in the HWMv2 Kconfig.soc tree.
This will allow sysbuild to test for the CPU cluster when targeting
remote board for a build.
Update espressif boards accordingly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
