Use uint64_t instead of uint32_t for the FLASH_STM32_EX_OP_SECTOR_WP
extended operation.
Some chips have two banks, more than 16 sectors each e.g. stm32h7a3xx
chips, so more than 32 bits are required.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add two new flash extended operations for reading and writing STM32
option bytes from the application code.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
For the flash driver, the base address is the MCU internal flash
address (usually 0x8000000). This PR gets the that address
from the device tree node "st,stm32-nv-flash"
instead of relying on the CONFIG_FLASH_BASE_ADDRESS
which might differ when building for another flash memory.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The implementation uses the same approach as STM32F1x.
Program/erase speed can be set by setting 'write-block-size' flash
property to 1, 2, 4 or 8.
Signed-off-by: Patryk Duda <patrykd@google.com>
This patch adds flash readout protection support for STM32F4 devices
family. These devices can enable protection on entire flash content.
Readout protection functionality was exposed as vendor extended
operation. To change readout protection state, caller should provide a
structure which describes desired RDP state.
Enabling readout protection permanently or disabling readout protection
(changing from level 1 to level 0) is guarded by
CONFIG_FLASH_STM32_READOUT_PROTECTION_PERMANENT_ALLOW and
CONFIG_FLASH_STM32_READOUT_PROTECTION_DISABLE_ALLOW respectively.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
This patch adds sector write protection support for STM32F4 devices
family. These devices can protect flash content with sector precision.
Write protection functionality was exposed as vendor extended operation.
To change write protection state, caller should provide mask of enabled
and disabled sectors.
Function responsible for locking/unlocking option bytes was implemented
for all STM32 devices supported by this driver.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Similar to #32218 and #34032
Flush ART caches before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Clearing the PSIZE bits in the FLASH CR should not invert the mask
defined in stm32f4xx_hal_flash.h (#define CR_PSIZE_MASK 0xFFFFFCFFU)
Signed-off-by: Justin Brederveld <jmbrederveld@gmail.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove soc/arm/st_stm32/stm32YY/flash_registers.h files.
Change register accesses in stm32 flash drivers to use FLASH_TypeDef
from modules/hal/stm32/stm32cube/stm32YYxx/soc/stm32xxxxxx.h.
Fixes#16235
Signed-off-by: Sarvesh Patkar <psarvesh314@gmail.com>
Some stm32f4 1MB SoCs support optional Dual Bank configuration.
This is not yet supported by stm32f4 driver, so report an
error when configuration is detected
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On 2MB parts, on sector 12 and above SNB is offset by 4.
Fixes#20016
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
`rc` gets assigned values from function returning `int` and not
`u32_t`.
Fixes#4051.
Coverity-ID: 177219
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add flash page layout support for STM32F4 SoCs.
This almost eliminates the need for flash_map.h, except for
STM32F4X_SECTOR_MASK, so delete the file and move the define into the
F4 implementation, to keep things simple.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This is a prep work commit for adding flash page layout support.
The internal flash APIs for STM32 on L4 and F4 are a bit
inconsistent. Some routines take a pointer to the private data, others
don't. Those that do take it as a last argument instead of a
first. Additionally, some APIs are declared in flash_stm32.h that
aren't ever used by the family-specific files.
Clean this up by making everything take a struct device*, and marking
routines static in the common driver code when possible.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
L4 write access requires 64 bits alignment
while L4 read access does not require any alignment.
To support specific check according to read/write,erase
a parameter is added to stm32_valid_range.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The STM32L4x SoCs embeds a slightly different embedded flash controller
from the STM32F4x SoCs.
This particular controller has the following properties :
- Up to 2 512KiB banks divided in 2KiB pages
- Flash can be accessed in any sizes
- Flash must be written in 64bit aligned 64bit double-words
The drivers/flash/flash_stm32f4x.c is refactored into a new common
drivers/flash/flash_stm32.c and drivers/flash/flash_stm32l4x.c is
created with the STM32L4x specific functions.
To ease the refactoring and keep common functions, the STM32L4x flash
headers are slightly modified to match the hardware reference naming
and solve compilation issues.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
A typo was present ion the erase and write function were bit were
uncorrectly unset but all other bit except the mask were unset.
The code still worked because the two typos fixed themselves.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
