Flags added allow keeping a pin as input/output by not disabling
the output buffer when configuring it as an input and by not
disabling input enable when configuring it as output. This can
be useful to implement signal diagnosis or for testing purposes.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Remove all entries that as not being used.
This also update hal to re-enable warning flags
as such as -Wno-unused-variable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add checks to return value of esp_intr_alloc to avoid drivers init
returning 0 when interrupt allocation fails.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Changes to bring support for esp32c6 SoC.
- clock control
- gpio
- pinctrl
- serial
- timer
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The interrupt status of the GPIO was not cleared when a new
interrupt configuration was set. This prevents the driver from
passsing all the gpio tests.
Fixes#54833
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Input pins in ESP32 (34 to 39) have no pull-up / pull-down internally.
Current behavior is that gpio driver fails when "disabling it", which
should not happen. It need to fail only when enabling this feature.
Fixes#50615
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
PR #49550 missed adding proper RTCIO pin mapping
in a few rtcio functions calls, which causes board
to crash. This fixes it.
Closes#50238
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Current implementation misses disabling input/output mux
once GPIO has already been configured. It means that after 1st
configuration, if GPIO is reconfigured, it won't disable previous
definitions, causing unexpected behavior.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit drops the `IRAM_ATTR` macro from the function declarations
because:
1. `IRAM_ATTR` macro makes use of the `__COUNTER__` preprocessor macro,
which increments for every macro invocation and causes the section
specified in the forward declaration to not match that of the
function definition.
2. Section attributes need not be specified for forward declarations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
As a complement of 7689abee34,
which fixed an issue where gpio number could errouneously be
set to a number greater than 32 in DTS, there is also another
situation where driver instance can be configured with a pin number
greater than 32.
This PR adds another check in GPIO driver to confirm
whether the PIN number is within valid bounds.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32 has 2 GPIOs: gpio0 and gpio1.
Zephyr DTS model requires pin definition in dts file
from 0 to 31, meaning that when some pin within gpio1 range
is required, gpio driver needs to increament this value
by 32, required by LL API.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Current gpio and uart initialization level is set to
PRE_KERNEL_2, which won't let uart_console subsystem
to init its hook properly as it has same level.
Prioritize uart and gpio so that the console hooks
are properly initialized.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
After #41918, build started to warn discard qualifer
in config struct. This adds const into those structs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
this allows using a pin numbering scheme as per Espressif's
documentation and HAL usage, where pin counting does not wrap
up when reaching a given number.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Refactors all of the on-chip GPIO drivers to use a shared driver class
initialization priority configuration, CONFIG_GPIO_INIT_PRIORITY, to
allow configuring GPIO drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
Most drivers previously used CONFIG_KERNEL_INIT_PRIORITY_DEFAULT or
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, therefore the default for this new
option is the lower of the two, which means earlier initialization.
Driver-specific options for off-chip I2C- or SPI-based GPIO drivers are
left intact because they often need to be initialized at a different
priority than on-chip GPIO drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Introduce combined GPIO drive strength flags for GPIO controllers only
supporting either default or alternative drive strength regardless if
the pin is driven to a high or a low level.
Fixes: #30329
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to have Espressif SoCs working with
the same uart drivers, all low level functions
are now replaced to hal_espressif HAL calls.
This also changes pinmux, gpio and uart
init order to meet its dependencies.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This PR updates GPIO driver to use DTS information
regarding gpio availability.
This also fixes interrupt handling and
also removes kconfig definition for GPIO port.
A few configuration checks were also added to
improve code usage.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Need to declare the device before the pointer can be obtained, and to
validate the device before trying to use it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Convert drivers to use pinmux devicetree node to create pinmux device
object.
On intel S1000 we add 'label' as a required property and set it to
'PINMUX' to match CONFIG_PINMUX_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert gpio drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Fixup cases of GPIO_PORT_PIN_MASK_FROM_NGPIOS(DT_INST_PROP(n, ngpios))
to use GPIO_PORT_PIN_MASK_FROM_DT_INST(n) instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in esp32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use gpio_pin_t uniformly when passing pin indexes to the driver. Use
gpio_flags_t uniformly when passing flags to the driver. Change name
of pin configuration function in API function table to be consistent
with other API functions.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The only remaining port operations have dedicated API function table
entries. Remove the defines for access op (mode), and remove support
for access op from all implementations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
