Remove address-of operator ('&') when assigning `gpio_xxx_init`
function pointer in `DEVICE_DT_INST_DEFINE` macro.
This change aims to maintain consistency among the drivers in
`drivers/gpio`, ensuring that all function pointer assignments
follow the same pattern.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Fix compiler errors and warnings that are issued when compiling this
driver for use without the optional interrupt facilities.
When interrupts are not enabled for any instance of this device,
there's currently a compiler error in gpio_xlnx_axi_pin_interrupt_configure
due to the function's header being located within the ifdef-block for
interrupt-driven operation.
Fully encapsulate the interrupt-related functions
gpio_xlnx_axi_pin_interrupt_configure, gpio_xlnx_axi_manage_callback
and gpio_xlnx_axi_get_pending_int with ifdefs checking for interrupt
mode inorder to remove compiler warnings caused by those functions
being always present so far, while not being used in the API function
pointer table when all instances of this GPIO controller are operating
in polling mode. This circumstance causes a "declared, but not used"
compiler warning for each of those functions.
Signed-off-by: Immo Birnbaum <mail@birnbaum.immo>
Only provide implementations for optional operations if needed. This
patch deletes quite a few dummy `pin_interrupt_configure` ops (now
optional), and adjusts ifdeffery on some drivers so that optional ops
are only provided if they implement real functionality.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Clean up whitespace etc. using clang-format after previous changes. No
functional changes intended.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Added support for interrupt-driven GPIO for this driver if an interrupt
line is defined. Note that interrupt support is optional in the GPIO
core so it may or may not be present.
The core provides a single state change notification whenever any line
changes state on a given bank, so we need to check the states of the
lines ourselves to determine what has actually changed.
Also, the driver treats the first and second GPIO banks as mostly
separate devices, but a single interrupt is shared by both banks, so the
ISR ends up being registered by the first bank which also triggers
handling on the second bank if required.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
The properties being read for the all-inputs and all-outputs flags in
the driver for the second GPIO channel did not match the ones listed in
the DT schema or the existing device tree files. Fix this.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
PRE_KERNEL_1 is to be used for devices that have no dependencies
and do not use kernel features, such as those that rely solely on
hardware present in the processor/SOC. This commit updates these
gpios to initialize during the PRE_KERNEL_1 rather than the
POST_KERNEL. Some SoC drivers are moved to PRE_KERNEL_2 due
to dependencies.
A lot of 'other' drivers can depend on GPIOs though phandles
(such as reset lines, data or command gpios, etc...). Most of these
drivers that would need this would come up on the POST_KERNEL,
and it's likely the driver may not be up yet as it should be defined.
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
Refactors all of the on-chip GPIO drivers to use a shared driver class
initialization priority configuration, CONFIG_GPIO_INIT_PRIORITY, to
allow configuring GPIO drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
Most drivers previously used CONFIG_KERNEL_INIT_PRIORITY_DEFAULT or
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, therefore the default for this new
option is the lower of the two, which means earlier initialization.
Driver-specific options for off-chip I2C- or SPI-based GPIO drivers are
left intact because they often need to be initialized at a different
priority than on-chip GPIO drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Convert gpio drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
