Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add the nucleo_wba55cg board, which implements continuous transfer
with GPDMA and a linked list.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Application won't wakeup without external trigger in
the analog comparator wakeup configuration.
Therefore removing post-wakeup lines from sample regex as they are not
expected to occur in default testing scenario (without external triggers).
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This sample is designed specifically for the STM32 family.
With this filter, tests on other vendors' platforms will
be skipped.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Includes a RTC attribute as counter value to demonstrate
data being kept in memory after deep sleep reset.
This is only valid when MCUboot is enabled.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add initial support for the RP2350's PIO peripherals, extend the
existing example under samples/boards/raspberrypi/rpi_pico/uart_pio to
demonstrate this on the Raspberry Pi Pico 2, and update the board's
documentation.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
Using bare-metal approach for retention configuration
is no longer compatible with sys_poweroff() implementation.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This sample enables and configures the MCO1/2 output
for stm32 target boards.
MCO_PRE_DIV_n is defined by the stm32XX_clock.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Gap filling in hex files are now disabled per default, and therefore
there is no reason to explicitly disable gap filling.
It has never been possible to disable gap filling in binary files.
Disabling gap filling would just result in the binary file to be gap
filled with the tool's default value, objcopy=0x00.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nrfx_gppi module is an abstraction over nrfx_ppi and nrfx_dppi
drivers. It now has a Kconfig option that is separate from nrfx_dppi and
by default it enables all PPI/DPPI instances, if available.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Gives an example where the timeout value is 15seconds,
the prescaler of 8 can let the LPTIM count from 0 to 16 seconds
with LSE
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The AT / STA wifi sample is generic so it does not need to be
located under espressif board directory. Following commit
will do additional changes to make the sample more generic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This sample executes some mathematical functions
that can be used for audio processing like
filtering (Fast Fourier Transform (FFT)) or
echo cancellation (Least Mean Square (LMS) filter algorithm).
This is an example that demonstrates how to include a proprietary
static library into the Zephyr build system.
The library is in an out of tree location.
To use this sample, with an out of tree library, one needs to define
an environment variable LIB_LOCATION.
If that is not defined, a default Zephyr API is used instead.
By default it uses CMSIS-DSP backend for math operations.
In README one can find more information.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Google boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BBC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There's no need to add conditions to CONFIG_PWM_NRF_SW, because it is
already conditioned to DT status. Right now, if any system uses both
normal PWM and "SW PWM", it needs to manually enable the driver
Kconfig.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
