Using NET_TCP_MAX_SEND_WINDOW_SIZE and NET_TCP_MAX_RECV_WINDOW_SIZE
for TCP case.
Reduce net_buf count to save memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The AT / STA wifi sample is generic so it does not need to be
located under espressif board directory. Following commit
will do additional changes to make the sample more generic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move samples/net/wifi application to samples/net/wifi/shell
as it has been used as a shell application before.
Following commits will add new wifi samples to this directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove wifi sample config files for esp32c2/esp8684, as device
isn't able to run it after memory layout update.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Originally, the net_mgmt task priority is very low. Based on roaming
implementation, roaming is triggered in net_mgmt task. When running UDP
test while doing roaming, the net_mgmt task won't have much chance to
run and roaming can't be triggered.
Increase it to 3, which is same value of supplicant task.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add support for building NXP WiFi. Since the driver typically requires
binary blobs, enable CONFIG_NXP_WIFI_BUILD_ONLY_MODE for this testcase.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_MBEDTLS_HAVE_TIME_DATE, which will cause that mbedtls
include Zephyr time.h and leads to 'DIV_ROUND_UP' redefined warning.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Upstream NCS's library for storing Wi-Fi credentials.
This library allows storage of Wi-Fi credentials
using different backends.
Either the Zephyr settings subsystem
or the PSA secure backend can be used.
For testing purposes, credentials can be defined statically.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Signed-off-by: Kaja Koren <kaja.koren@nordicsemi.no>
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
This overlay has all necessary configuration needed for Enterprise mode.
Two variants are given, once with fixed size network buffers and other
with variable size network buffers (still experimental).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The sample currently doesn't build for non-secure nRF platforms due to
mbed TLS misconfiguration - TFM enforces PSA crypto API, while the
default configuration for supplicant uses legacy crypto configuration.
In result, build fails due to unsatisfied dependencies. Therefore,
disable this variant from building temporarily to unblock the CI, until
the issue is resolved.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove the system heap override config from the board sample config.
Remove the memory saving restrictions.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
1) After the wifi driver successfully connects to the AP,
the dormant state should be set to OFF.
Once a deauth/disassoc frame is received or link lost occurs,
the dormant state should be set to ON.
2) Enable CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO and CONFIG_NET_CONTEXT_PRIORITY
to push high priority packets directly to network driver.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
DHCPv4 server will probe the offered IP address (send ICMP echo request)
and wait for 1s (default) before offering the address. STA sends out DHCP
discover, but gets no response. Windows automatically assigns the network
card an IP address of 169.254.xx.xx.
So set timeout for ICMP probe sent by the server to 100ms.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
In order to mitigate side channel attacks, even if the PWE is found the WPA
supplicant goes through full iterations, but in some low-resource systems
this can be intensive, so, add an option to exit early.
Note that this is highly insecure and shouldn't be used in production
Signed-off-by: Gang Li <gang.li_1@nxp.com>
Wi-Fi sample is stack heavy, so, by default increase the stack sizes to
work with any driver, esp. those use WPA supplicant like nRF Wi-Fi.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell prints scan results to the console taking time and this puts
pressure on net_mgmt Queue, so, increase both timeout and Queue depth to
handle crowded Wi-Fi channel (~200 APs).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Currently wifi sample code contains a pair of .conf and .overlay
for every single esp32-based board. Files are usually identical.
This PR remove all esp32* board files and use common socs instead.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
