Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
in CI, we may need to quit if there is any failure
to save time, so add this --quit-on-failure so that
any failure will quit the test.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Fixes ruff linting errors UP030, UP031, UP032,
which make you use format specifiers (fstrings)
instead of printf formatting or str.format().
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting errors UP021 and UP022,
where obsolete subprocess parameters were
still used.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes errors E402 - module import
not at top of file.
One error in testplan.py left in,
as it is a part of a obscure 2020 fix
that would need to be re-tested.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This change introduces the ability in twister to select which
emulation/simulation tool to use on the command line.
If none is specified, it will select the first in the list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Fix a problem of Ztest suite names not taken into account by Twister
to identify a TestCase, so in some situations a Ztest test's status
was not assigned to the proper TestCase and it remains 'None'
whereas the actual status value lost, eventually the resulting total
execution counters not correct.
The issue was observed in these situations:
* Ztest application with multiple test suites having same test names.
* Ztest suite is 'skipped' entirely on execution with all its tests.
The proposed solution extends Twister test case name for Ztest to
include Ztest suite name, so the resulting identifier looks like:
`<test_scenario_name>.<ztest_suite_name>.<ztest_name>`
The above naming scheme now requires ztest_suite_name part to be
provided for `--sub-test` command line option.
Testcase identifiers in twister.json and testplan.json will also
include ztest_suite_name component.
The Twister Ztest(Test) Harness is improved to track all state changes
known from the test application's log for Ztest suites and test cases,
so now it parses log output from a Ztest application more scurpulously.
Regular expressions to match log records are extended and optimized
to compile them only once and, in some cases, fixed (suite summary).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Twister shall now verify that the user does not
use an obsolete Python version. If user's Python
is deemed too old, it will raise a relevant error.
This check will also happen when running Twister
via west.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
As per its creators, CMake is written with a capital "M".
The initial reason for this change is that I want Twister to print
"ERROR : CMake build failure" instead of "ERROR : Cmake build failure".
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Set soc_root using Path to avoid wrong generated path in the list of
soc_roots and other roots read from module.yml file
Fixes#80531
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
--device-testing implies runnable tests, this was the case before the
rework and was missed in one spot, so instead do that directly in the
argument parser.
Fixes#80428
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, debug logging in the console and verbosity
are tightly coupled - verbosity of level 2 and higher
enables logging at the debug level.
This change introduces a separate Twister flag
responsible for controlling the debug logging,
while leaving the rest of verbosity unchanged.
This allows for controlling the verbosity on
both logging levels, according to one's needs.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Get data for various roots from modules and do not hardcode location
when retrieving list of boards in testplan.
Fixes#71761
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-arrange Twister command line options for test plan reporting
to a dedicated group with mutally-exclusive options to reflect
actual implementation and its dry-run execution mode.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend pytest-args from configuration yaml file with args
from command line instead of overwriting.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Fix confusing `TypeError: 'type' object is not subscriptable`
at _get_installed_packages() if twister runs on python version < 3.9
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This change is removing some deprecation warnings
which for some reason causing failing tests with
Python 3.12 on CI #76877.
Also, it fixes warnings from pytest like:
PytestCollectionWarning: cannot collect test class 'TestPlan'
because it has a __init__ constructor
(from: scripts/tests/twister/test_testplan.py)
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
The flag won't work with sysbuild since there is no way to
reliably tell to a parser which data came from which image.
fixes: #74092
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
New Twister option `--footprint-report` is introduced to collect and
write detailed memory footprint results for symbols as an additional
JSON file. By default, the new option is disabled.
The new option implies and extends `--create-rom-ram-report`, so there
are three choices: 'ROM', 'RAM', and 'all' to select what memory area
symbols to report in `twister_footprint.json`.
In case of the custom report name, or per-platform report, it is always
composed with the rightmost '_footprint.json' suffix.
The memory footprint report has similar structure as `twister.json`
and compelements it having reduced set of test suite properties:
- instead of `testcases` it contains `footprint` object with
`rom.json` and `ram.json` artifacts embedded there;
- other properites are limited to represent only the essential test
suite context, thus to allow further data processing consistently
and independently from the `twister.json`.
- 'filtered' test instances are not included into the footprint report.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Filtered testcases are removed by default from Twister tests.
Older functionality is preserved via a new Twister flag:
--report-filtered.
Old tests were adjusted and a new test for that flag added.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
The --flash-before flag allows devices to be flashed before the serial
connection is established. However, the implementation was incomplete and
only worked if the port address already existed at the start of the run.
This is incompatible with devices that implement the USB in software
(eg: USB-CDC).
This commit fixes the implementation to delay setting up the connection
until after the device is flashed, and to retry the connection for two
seconds after flashing to give the device time to enumerate as a USB
device.
Signed-off-by: Mike Szczys <mike@golioth.io>
Fix default command line options check dependency on `--device-testing`
when it is provided to run Twister and turn device command options
as mandatory.
Fixes after changes introduced with #72399.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Store Twister command line options in twister.json report as
`environment.options` object. It allows to keep the actual
execution context for test results analysis and history comparison.
A new command line option `--report-all-options` enables to report all
command line options applied, including these set as default values.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Added a switch that show failed/error report from the last run.
Default shows all items found. However, you can specify the number of items
(e.g. --report-summary 15).
It also works well with the --outdir switch
Signed-off-by: Kamil Paszkiet <kamilx.paszkiet@intel.com>
Improve Twister command line arguments for memory footprint:
* group and order footprint arguments meaningfully,
* clearer help descriptions,
* resolve logical inconsistences for combinations of arguments,
in particular:
`--last-metrics` now forces `--enable-size-report`,
`--show-footprint` now controls only detailed log output of
footprint deltas in comparison modes.
* align twister tests accordingly.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
ANSI color is great for viewing output in a terminal, but currently it
also gets written out to the `handler.log` file. Text editors usually
don't render these, resulting in a hard-to-read file with a lot of
gibberish interspered. This commit strips ANSI sequences from lines
before writing them to the handler log file. This change does not
affect what is printed in Twister's console output, so one would still
see the colors there.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Winodws user may use the `\` as path, but in twister we use the common `/`
as path separated, to avoid the mis-use, convert it to `/` in twister
first normpath, and then replace the os.sep
tested by:
For Linux Like:
west twister -p disco_l475_iot1 -s samples/hello_world/...
For Windows:
west twister -p disco_l475_iot1 -s samples\hello_world\...
fixing: #70310
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add option to flash board before attach serial.
Current implementation performs the following sequence:
1. Open serial port to listen to board log output
2. Flash device
In case of ESP32 where it uses the same serial port
for both operations, flashing needs to come first.
This PR adds a twister option named --flash-before
which enables the process above, allowing tests to be
performed properly.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
For using --device-testing with --device-serial or --device-serial-pty
it is necessary to provide the platform to be used for testing.
Not specifying a platform or specifying more than one is an error.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Follow-up: fe25709a9c twister: add unit_testing soc and board
Moving the soc.yml and board.yml to subsys/testsuite tree.
Introduce subsys/testsuite/arch/archs.yml with unit_testing arch.
Update the Zephyr CMake module unittest.cmake to include HWMv2 and
reorder includes to follow same order as zephyr_default.cmake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enhance the -s option of twister, used to point to a single scenario in
a testsuite.
- Now accept --scenario on the command line, --test still supported.
- If no testsuite is provided, extract testsuite from scenario
identifier and avoid parsing the whole tree if we only want to address
one scenario in a testsuite.
- If just the identifier of the scenario is provided to
--test/--scenario option, try to find this as well, do not need the
full path for that.
Something like this is now possible:
twister --scenario kernel.threads.init --list-tests
twister -T <path> --scenario kernel.threads.init --list-tests
twister -T <path>/kernel.threads.init --list-tests
All should print the same output.
Fixes#67307
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As saving tests writes to file, rather than appending to it,
we should indicate that in the --save-tests help.
--load-tests help changed so its grammar is the same as --save-tests's.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Automatically populate the snippet roots from Zephyr modules, instead of
only looking in `ZEPHYR_BASE`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Additional checks for Twister command line options `--coverage-tool`
and `--coverage-formats`.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Twister now uses GCOVR by default as the more reliable code
coverage reporting tool instead of LCOV.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
One can not even replace sucessfully pytest basic sample `pytest-args`
with command line "--pytest-args", as all it does is to append a single
string to current list of commands, making it impossible to send several
arguments.
This patch fixes that by allowing several instances of `--pytest-args`
to compose the whole list of arguments to be passed to pytest.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Useful option during development and when applying smaller change to the
code and verifying changes using tests. This works fine as long as no
dependencies or major changes are done, i.e. when editing few files and
in a subsystem. Use with caution and use on your own risk :-)
When building multiple tests, this provide significant boost, up to 300%
faster than when rebuilding everything from scratch or when re-running
cmake every single time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend Twister command line with --pytest-args. This parameter
is passed to pytest subprocess. It allows to select a specific
testcase from a test suite.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
