These ignores were added with an older version of pylint and are
either removed or ignored by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix Ztest test function name extraction from ELF symbols
for C++ compiled binaries where symbol names need additional
'demangling' to match with corresponding test names.
The `c++filt` utility (part of binutils) is called for
demangling when it is needed.
Twister test suite extension and adjustment.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix a problem of Ztest suite names not taken into account by Twister
to identify a TestCase, so in some situations a Ztest test's status
was not assigned to the proper TestCase and it remains 'None'
whereas the actual status value lost, eventually the resulting total
execution counters not correct.
The issue was observed in these situations:
* Ztest application with multiple test suites having same test names.
* Ztest suite is 'skipped' entirely on execution with all its tests.
The proposed solution extends Twister test case name for Ztest to
include Ztest suite name, so the resulting identifier looks like:
`<test_scenario_name>.<ztest_suite_name>.<ztest_name>`
The above naming scheme now requires ztest_suite_name part to be
provided for `--sub-test` command line option.
Testcase identifiers in twister.json and testplan.json will also
include ztest_suite_name component.
The Twister Ztest(Test) Harness is improved to track all state changes
known from the test application's log for Ztest suites and test cases,
so now it parses log output from a Ztest application more scurpulously.
Regular expressions to match log records are extended and optimized
to compile them only once and, in some cases, fixed (suite summary).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extended hardware map to share a single board between variants.
To run tests for different variants on the same board
without re-configuring the hardware map file for each variant,
one can use a `platform` atribute as a list of names.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Previously, rtt start would always fail because the target
(i.e. firmware) had not been started.
```
Info : rtt: Searching for control block 'SEGGER RTT'
Info : rtt: No control block found
```
When the command is 'rtt', run the binary via gdb before calling
'rtt start'. Firmware calls `SEGGER_RTT_Init()` shortly after
init which allows OpenOCD to find the RTT control block.
Similarly, only start the 'rtt server' after calling
'rtt start' to avoid any potential race conditions
internally within OpenOCD.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, there was a warning that the to_num() method can
(and probably should) be unbound from OpenOcdBinaryRunner.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Similar to how print_gdbserver_message() prints GDB server info
when "west debug" is run, print RTT server info when "west rtt"
is run.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add support for the rtt target so that users can run
`west build -p auto -b <board> -t rtt <app>`
similarly to the way that users can now do so with the debug
target, since the rtt target is supposed to be used in a similar
way.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This is generating lots of duplication and unnecessary builds when
multiple arches are being changed. Let's stick to basic coverage which
should be enough for PRs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a compliance test using ruff, for both linting and formatting of
newly added python files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add simple scripts to convert ruff check and ruff format output to
toml exclude sections.
These sections can be used to ignore baseline violations for an existing
codebase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Reporting or annotating issues can be done on a range rather than a
single line.
Add support for end line and end column.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Moves several node-specific operations inside the Node class to improve
its encapsulation, remove a monkey patch and access to internal methods
and fields.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Netcat (nc) does not handle SIGINT. It silently ignores it.
We cannot use run_client(), given that the pydoc for
run_client() specifically contains "Run a client that
handles SIGINT".
Instead, use check_call(), which correctly handles Ctrl+C.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
LinkServer manages port numbers for gdb and semihost as separate linear
sequences when invoked to debug multi-core applications, e.g the
gdb-server instance for cpu0 will have the default GDB port 3333 and the
next gdb-server instance will be assigned the port 3334. The latter will
conflict with the default port for semihost which is 3334.
This patch changes the default port for semihost to 8888.
Port numbers can be changed when invoking the linkserver runner.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
To support checking for sorted blocks of multi-line text add
an optional regex pattern for the KeepSorted compliance check.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some auto formatters will wrap long lines of code and insert newlines
that are part of function decls outside of arguments. This change strips
out all newlines so syscall typename regex function as expected.
Signed-off-by: Mark Inderhees <markind@meta.com>
This patch adds support for the size_t %z format specifier to the
dictionary parser.
It's the correct format to use for size_t types in modern C,
but it's not supported in python directly.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Fix wrong reporting about where testcases were executed.
We have:
INFO - 1130 of 1130 executed test cases passed (100.00%) on 0 out of
total 860 platforms (0.00%).
which is obviously wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
suite stats were not correct, a mixup between skipped and filtered
suites was leading to inconsistent numbers. This is now fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not report status issues as errors, very confusing and developer end
up looking at the wrong thing, instead, treat those as warnings and
count them and report them at the end.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is confusing to report filtered testcases as testcases that were
selected but not exexuted. If they are filtered, then there should not
be considered as selected.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
custom simulator needs an executable defined, or else we will have tests
marked runnable with nothing to run them which would result in an
error/warning.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On nRF54H and nRF92, booting certain cores requires programming a UICR,
which is normally generated using nrf-regtool. This should be considered
an optional dependency, because we do not wish to force non-Nordic users
to install it just to work with Zephyr, or just for build-only tests.
When nrf-regtool is not installed, a CMake warning will be displayed,
but people ignore warnings all the time. As the last line of defense,
check for missing UICR in the nrfutil flash runner, to prevent our users
from unintentionally programming unbootable firmware. Show a fatal error
specifically if CONFIG_NRF_REGTOOL_GENERATE_UICR=y, yet no UICR exists.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
[1] was introduced to get more valuable answers from
the PropertySpec.path API, which is supposed to tell
in which file the property's specification was "last modfied".
Further work on related issues [2] showed that the
approach chosen in [1] is dead end: we need to first rethink
how bindings (and especially child-bindings) are initialized.
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit b3b5ad8156.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
Use-case "B includes I includes X":
- X is a base binding file, specifying common properties
- I is an intermediary binding file, which includes X
without modification nor filter
- B includes I, filtering the properties it chooses
to inherit with an allowlist or a blocklist
Check that the properties inherited from X via I
are actually filtered as B intends to,
up to the grandchild-binding level.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
This unit test was added to cover the change introduced by [1].
Further work on related issues [2] showed that the chosen approach
is dead end.
We're reverting all changes made in [1].
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit 70eaa61cb0.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
This unit test was added specifically to cover a regression
reported by the CI while working on [1].
Further work on related issues [2] showed that:
- [1] and [2] are dead end: we need to first rethink
how bindings (and especially child-bindings) are initialized
- the inclusion mechanism supported by Zephyr deserves more systematic
testing in edtlib if we want to work with confidence
The approach we choose is to:
- revert all changes made in [1]
- from there, systematically add unit tests as we address
the issues we identified (or the additional features we need)
one after the other
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit 33bb3b60d9.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
A recent commit changed all references to the global 'west.log' instance
(now deprecated) to the new WestCommand logging API, but another PR
merged in the same period added an extra instance that is now causing CI
to fail. Convert this last reference to the new API.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The 'west build' command does not know about conditional flags (in the
format 'type:value:CONFIG_FOO=bar') in the 'extra_configs' argument of
Twister testcase.yaml files, and currently converts them to malformed
arguments that are silently ignored by cmake.
This change adds a check to 'west build' to clearly warn the user if the
'extra_configs' list contains conditional flags and provide a hint on
how to add them to the CMake command line.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fix Twister TestCase statuses left not assigned ('NONE') in these 'NOTRUN'
situations:
* a test suite has `integration platform` which is not available to run.
* `--cmake-only` execution.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Twister shall now verify that the user does not
use an obsolete Python version. If user's Python
is deemed too old, it will raise a relevant error.
This check will also happen when running Twister
via west.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Remove deprecated _ENUM_TOKEN and _ENUM_UPPER_TOKEN. These are
deprecated for over three years by now.
Signed-off-by: Joel Hirsbrunner <jhirsbrunner@baumer.com>
When using the --build-only into --test-only
Twister setup, NOTRUN statuses were not properly rerun.
Now they are properly run again if runnable.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
ExecutionCounter has been expanded and now hold i.a.
more information on the statuses of TestCases.
This information is now incorporated in relevant summaries
- runner.py and reports.py.
Layout of those was changed to present that
and previous information in a clear and concise way.
TestInstance execution counter now is more intuitive.
Instances filtered out before running are no longer included there.
Retries now properly reset the counter.
TestCases with None and other incorrect final statuses
are logged as errors, but do not
exit Twister with a nonzero exit code.
This is because None statuses, although incorrect,
are currently common.
Inconsistent spacing in ERROR and FAILED fixed.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
scripts: Dmitri fix
Fix of a problem noticed by Dmitri
Removed unnecessary additional spaces when
printing FAILED and ERROR status.
Now TwisterStatus.get_color is used more.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
As per its creators, CMake is written with a capital "M".
The initial reason for this change is that I want Twister to print
"ERROR : CMake build failure" instead of "ERROR : Cmake build failure".
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
the script shows an incorrect file name, I check the wrong file first, then
I find the script did not print the current reading file name.
Fix this to prevent others from wasting their time on this.
The new error message:
```
[1/179] Generating syscalls.json, struct_tags.json
Error decoding zmk/.../altera_msgdma.c (included in zephyr/.../ethernet.c)
```
Signed-off-by: Sa Sasu <i@sasa.su>
Set soc_root using Path to avoid wrong generated path in the list of
soc_roots and other roots read from module.yml file
Fixes#80531
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup notrun tests with the -M option. This is used in the weekly
build and fails because devices will run out of space.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the `Board` class, the `dir` member was renamed to `directories`,
both to indicate that it is now a list (in HWMv2 with board extensions)
and to reflect the addition of the `BOARD_DIRECTORIES` CMake variable.
Considering that the build system also keeps the `BOARD_DIR` variable,
and for the sake of backwards compatibility and brevity, it should be
useful to retain `Board.dir` in Python as well, symmetrically.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Removes validating the qualifiers for flash run once configuration
as files may be present that contain information for qualifiers
that are not present in a single repository but are spaced out in
other repositories, or might be optional
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds an optional priority parameter to the flash runner run once
configuration which allows for deciding upon which file should
ultimately be used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes: #72374
Support extending an existing SoC with new CPU clusters.
This commit introduces the following changes to allow an SoC to be
extended out-of-tree.
The SoC yaml schema is extended to support an extend field which
will be used to identify the SoC to be extended with extra CPU clusters.
A SoC 'a_soc' can be extended like this:
> socs:
> extend: a_soc
> cpuclusters:
> - name: extra_core
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #69548
Support extending an existing board with new board variants.
This commit introduces the following changes to allow a board to be
extended out-of-tree.
The board yaml schema is extended to support an extend field which
will be used to identify the board to be extended.
A board 'plank' can be extended like this:
> board:
> extend: plank
> variants:
> - name: ext
> qualifier: soc1
For the rest of the build system this means that there is no longer a
single board directory.
The existing CMake variable BOARD_DIR is kept and reference the
directory which defines the board.
A new CMake variable BOARD_DIRECTORIES provides a list of all
directories which defines board targets for the board.
This means the directory which defines the board as well as all
directories that extends the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
if alias or shorthand name is provided on the command line, we need
convert this to complete target name for the filters to work.
Fixes#80332
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
--device-testing implies runnable tests, this was the case before the
rework and was missed in one spot, so instead do that directly in the
argument parser.
Fixes#80428
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With the recent introduction of the SUIT manifest starter binary blob,
it is now possible to use it with the nRF54H20 during the flashing
procedure in order to provide a valid SUIT manifest to the system.
This PR introduces the code that handles programming the SUIT manifest
starter, as well as a new --suit-manifest-starter command-line option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add optional value parameter to dt_compat_any_has_prop
kconfig preprocessor function, which puts an additional constraint on
the truth of the function in that the property value must match the
parameter value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix nrf5340dk/nrf5340/cpuapp board name to align with HWMv2 changes
and resolve build error for its footprint data collection.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Align with native_simulator's upstream main
51b27b67addd0073dc86e3d83f492c5cac5c3361
Which includes:
* 51b27b nsi_utils: Add macro for weak declarations
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Commit f987e8c6f0a49b04a1184b1a36612612482e3d24 introduced a regression
where the is_ip check fails if no --id is passed as an argument.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If multiple J-Links with IP support are used,
they can be selected with different ports.
The actual implementation is just using the default port.
Make the port selectable with <ip>:<port>.
Signed-off-by: Michael Arnold <marnold@baumer.com>
Add support for xsdb(Xilinx System Debugger) used with AMD's FPGA
and SOC platforms, it is a user-friendly, interactive, and scriptable
command line interface, by design choice it's expected that platforms
to have xsdb scripts present inside their platform code.
xsdb runner has bitstream and fsbl optional arguments, bitstream is
needed for fpga targets and fsbl is needed for SOC targets, added
support for both options.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
We now use hwmv2 to list boards instead of relying on twister specific
config files.
One yaml files (twister.yaml for now) will have all the data needed for
all possible targets and variations of a board reusing most of the data
where possible and variations can override the top level data.
Twister keeps track of 'aliases' of boards and identifies that for
example native_sim is the same as native_sim/native, so either names
will be possible in both test yaml files or on the command line,
however, the reporting will always use the full name, so no there is no
confusion about what is being tested/built.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for a "named event" trace. This trace is intentionally not
used by the system. The purpose of this trace is to allow driver or
application developers to quickly add tracing for events for debug
purposes, and to provide an example of how tracing subsystems can be
extended with additional trace identifiers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds a new NOTRUN status, which indicates
that a test was successfully built, but
not run on account of being not
runnable in given test instance.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
The commit 221199e15b presents a bug that
makes west flash failed with error.
AttributeError: 'NoneType' object has no attribute 'startswith'
In function is_tunnel(), tunnel may contain None and has no attribute
"startswith". Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Adjust existing tests to support the changes and add new tests to test
the newly added feature.
Signed-off-by: Joel Hirsbrunner <jhirsbrunner@baumer.com>
It is currently impossible to use enum with any array like type (i.e.
string-array and array, these are the only ones that make sense) in the
devicetree and dt-bindings.
However, there is no such remark in the dt-bindings section of the docs.
Since this is a feature that comes in very handy and is implemented
fairly easily, I adjusted the scripts for this.
It is now possible to do something like this.
```yaml
compatible = "enums"
properties:
array-enum:
type: string-array
enum:
- bar
- foo
- baz
- zoo
```
```dts
/ {
enums {
compatible = "enums";
array-enum = "foo", "bar";
};
};
```
Signed-off-by: Joel Hirsbrunner <jhirsbrunner@baumer.com>
This adds support for J-Link tunnels, which run on top of an IP network
and therefore uses the -IP option. J-Link tunnels are identified by a
tunnel: prefix instead of a bare IP address. This change checks for the
presence of such a prefix, and choses the -IP transport option if the
tunnel prefix is found.
This has been tested with J-Link Remote Server v7.98g and the SEGGER
tunnel option.
Signed-off-by: Adam Dunkels <adam@dunkels.com>
like extra_confs, add extr_args filterable by
soc:<arch>:<extra_args> or
platfrom:<platform name>: <extra_args>
simulation:<simulator name>: <extra_args>
which will only apply to given platform or arch
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
These two functions have stood the test of the time and they have
absolutely nothing specific to sign.py
This has the benefit of transitioning away from west's global and
deprecated logging interface
(https://github.com/zephyrproject-rtos/west/issues/149) and this
deprecation is what prompted this commit: see #79240.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add `west bindesc get_offset` command to print the offset of
the descriptors inside the given image.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Testcase execution time doesn't match between twister.xml and
twister.log. Testcase execution time is the sum of the previous
testcases' execution time plus its own execution time in
twister.xml.
This patch fixes the issue above.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
Provide a mechanism to propagate useful arguments from one runner to the
next. The primary use case for this is to propagate a JLink serial
number, so that if it is queried from the terminal the user only needs
to make the choice once.
Implements #76077.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The recently introduced board.full_name property can now be used as part
of the format string in the `west boards -f ...` command.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
For pristine builds 'west build' will now create a build_info.yml file
containing the west build command including arguments.
This is done to help users and external tools to recreate builds.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The build_info function provides a generic and stable way of dumping
build information to the <build>/build_info.yml file.
The build info file is in YAML format and the keys in the file are
intended to be stable, as to allow external tools to retrieve
information regarding the build.
The main differences to the CMakeCache.txt are:
- Settings in the CMakeCache.txt are user controlled, whereas the
information in the build info file is intended to be those values
which are used by the build system regardless if those are specified
by the developer or picked up automatically.
- Internal build system variables are not present in the CMake cache
and should not be, because their values are calculated when CMake
runs.
This also has the benefits of decoupling CMake variable names from
build info keys. Several CMake variables has internal build system
names, and the build system is free to rename those at its own
discretion.
Having dedicated key names ensures a stable API that external tools can
rely upon.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When building an LLEXT-enabled kernel, 62b19ef65c added weak aliases
of all syscall implementation functions to a pointer to NULL, with the
assumption that LLEXT would check the required symbols at link time and
fail if any of them were found.
This check, however, is ineffective in the current implementation: the
actual address that is exported is the rather normal-looking location of
the variable containing the NULL pointer. This defeats the NULL symbol
validity checks in llext_link.c and causes the extension to crash at
runtime by jumping to a location containing a few zeroes in read-only
data memory.
This commit makes sure the alias target is actually placed at address 0
using the llext-sections.ld linker fragment, so that undefined syscall
implementations are exported as NULLs and as such properly flagged at
link time.
The test for this functionality is also updated to reflect the change.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Full name or description of a board is something we are missing in
HWVv2. It is right now being added to yaml files parsed by twister. This
should be generically available to tooling and documentation
independently from twister.
As we rework how twister parses board meta-data (#77250) and how we
generate board documentation (#79160), this becomes neceassry.
Moving the board full name/description from the twister yaml files to
the board.yaml is something we can automate once the schema is agreed
upon.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Like some other string properties, I will add a derived form
to FULL_NAME to make it easier to reference from macros.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This is required if boards make use of such definition in their Kconfig
files. In Kconfig.board.v2, only `boards/Kconfig.v2` is loaded, but
BOARD_REVISION is part of `boards/Kconfig`, which can't be loaded in this
context.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fixed escaping of double quotes, backslashes, and new line characters
so they can be used in string properties.
Previously, double quotes and backslashes were escaped in gen_defines.py
but not in gen_dts_cmake.py, and new lines were not escaped in either,
so using any of these characters would break the build.
Signed-off-by: Joel Spadin <joelspadin@gmail.com>
Add unsigned integer support to the log parser.
This does not change the underlying log format,
it only allows the log parser to more accurately
read the log format.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Fix trailing `\\r\\n` (escaped CR/LF) didn't cut off because of rstrip()
removed by #58338, so the CR/LF suffix was never found as the actual line
end was `\\r\\n\n`.
Add ANSI code sequence to `test_handlers` Twister unit test.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add several examples for `upload_test_results_es.py` script usage
with ElasticSearch index map files for the following use cases:
* Twister test results.
* Twister test results with recordings.
* Memory Footprint data (`twister-footprint.json`).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Separate the pickled EDT generation from the C-Macro header
generation in gen_defines.py to have a more clear responsibility
of the scripts in the DTS parsing process.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Introduces type hints to all functions for improved static type checking
and IDE support.
Also equalizes spacing between functions as the lines are being touched
anyway.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This commit adds support to dictionary logging to parse binary
data directly from input serial and generate the ascii logs.
Signed-off-by: Kumar Siddaramayya <harish.kumar@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds a --download-buffer-size option to the canopen runner to allow
specifying the buffer size of the SDO download.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Package in the requirements-run-test.txt file, bz,
is not package enabling bz2 support.
It is a security concern and must be removed.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Currently, debug logging in the console and verbosity
are tightly coupled - verbosity of level 2 and higher
enables logging at the debug level.
This change introduces a separate Twister flag
responsible for controlling the debug logging,
while leaving the rest of verbosity unchanged.
This allows for controlling the verbosity on
both logging levels, according to one's needs.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
In case of problem with parsing hex data from coverage dump,
do not create empty gcda file.
Such empty file will break gcovr parsing.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add new script `pack_as_twister.py` to convert memory footprint
data prepared by `./footprint/scripts/track.py` into JSON files
compatible with Twister report schema. Next, the data can be
transformed and uploaded to ElasticSearch data storage the same
way as memory footprint (and other) reports executed by Twister.
Add to `plan.txt` an optional column with the corresponding
test suite names for 'footprints' as an example for test instance
name composing with `--test-name` command argumnent.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This small change concerns the following filter functions:
1. `dt_compat_enabled(C)`:
There's a node with compatible `C` and status "okay".
2. `dt_enabled_alias_with_parent_compat(A, C)`:
There's a node with alias `A` and status "okay", and its parent
has compatible `C`.
3. `dt_label_with_parent_compat_enabled(L, C)`:
There's a node with label `L`, and its parent has compatible `C`
and status "okay".
All three functions involve checking whether some node or its parent has
a given compatible, but the way this has been checked is inconsistent.
Function (1) has done it with this Python conditional:
compat in node.compats
while (2) and (3) have used:
parent.matching_compat == compat
The first check works well with nodes that have multiple compatibles,
and it is more aligned with the notion of "has_compat" as seen in the
devicetree macros for C, CMake, and Kconfig.
Arguably, `matching_compat` shouldn't have been used here, because it is
actually a property of a node's binding, moreso than of the node itself.
In practice, it's usually equal to the first compatible for which edtlib
has found a binding, which at first glance is just more constrained than
the `node.compats` check. However, there also exist obscure cases where
the `node.compats` are empty, while the `node.matching_compat` is not.
For now, the three functions can use a combined check, to improve
consistency and utility while avoiding breakage:
node.matching_compat == compat or compat in node.compats
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
It has been deprecated since Zephyr v2.6.0.
The filter that replaced it - `dt_enabled_alias_with_parent_compat` -
had shared code with it, which can now be inlined into `ast_expr()` to
match the parser's overall code structure.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
The script was only looking at the Zephyr base repository and failing to
look for soc roots e.g. in other modules.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
With the requirement in #78316 for Zephyr modules to always define
ZEPHYR_<name>_MODULE Kconfig setting then there is no longer a need
for this commit. Simplify check_compliance by reverting ths commit.
This reverts commit 35e28e6315.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When at verbosity 1, we print out the status of TestInstances.
This makes it harder to notice changes at TestCase level,
which require perusing the logs.
This adds TestCase status and reason printing
if verbosity level is 2 or more.
Reason printing is suppressed if the reason is empty or None.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Running sysbuilt tests fails because of missing "run" target.
This adds the default domain context to the command.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Some dict.get() calls did not use a TwisterStatus
as a default value, thus using a NoneType where
TwisterStatus should appear.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
ReStructuredText can sometimes be tricky to get right, especially for
folks that might be more familiar with Markdown.
This adds a Sphinx/RST linter to the compliance check script to help
catch common issues that can easily go unnoticed and cause rendering
issues.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If you interrupt process() operation, we want Twister
to exit as gracefully as it can. This avoids the
UnboundLocalError that could appear e.g.
when interrupting the operation via SIGINT.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
"type | None" syntax is only available with Python from version 3.10,
fix building with earlier 3.x Python versions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Align with native_simulator's upstream main
b4b9791ac822ae300363dc3ebbc7b7ac200632ce
Which includes:
* b4b9791 NATIVE_SIMULATOR_IF macros: Provide version with explicit
section names
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This changes how some arguments are set in the `Handler`s.
`options`, `generator_cmd` and `suite_name_check` are now passed as
arguments to the constructor rather than injected from an other module.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Python 3.12 warns that
> Testing an element's truth value will raise an exception in future
> versions. Use specific 'len(elem)' or 'elem is not None' test instead.
> if elem_ts := root.find('testsuite'):
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
CONF_FILE, DTC_OVERLAY_FILE and OVERLAY_CONFIG are deprecated but still
used by the tests causing warnings when running them.
This adds a test_data specific to validate the emission of the warning,
and removes the offending args from the other test_data files.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Space separated lists are deprecated but this notice is not checked for.
extract_fields_from_arg_list also converts lists back to space-separated
lists causing a warning on get_scenario
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Moves the telnet client into runners/core.py as well, as this is now shared
between openocd and jlink.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This was non-trivial, as openocd is a bit weird to work with. Using only
commands passed with '-c' arguments, I couldn't get it to reliably resume
(or just not halt) the target when started. I tried using the 'sleep'
command, and various 'configure -event XX { resume }' events, but nothing
panned out, as it seems to always halt after all `-c` commands have been
run.
To avoid that, this waits for the TCL RPC port to be up, and sends a
resume command there. This works reliably.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This command runs separately from a debug server, instead of attaching
to a running server. This is both the easiest out of the box experience,
and also should be possible to implement consistently for most runners.
This commit includes an initial implementation for pyocd.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
