mbedtls is now used in BLE samples, increasing the stack depth needed
of the calling threads. This was causing stack overflows in several BLE
samples.
Increasing the main stack size for common samples, but also the shell
stack size for samples calling bt API from the shell thread like the
bt shell.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
This change adds support for segger rtt, similar to other supported
soc's. This was lacking when evaluating tracing.
Without this addition the system fails to build, indicating that
HAS_SEGGER_RTT is missing. Adding CONFIG_HAS_SEGGER_RTT in prj.conf is
not allowed.
Signed-off-by: Bart De Vos <bart.devos@verhaert.com>
Creation of the new zephyr\soc\nxp\common\nxp_nbu.c driver which manage
the interruption of the NBU. This modification is mandatory to support a
coex application which includes Bluetooth and 802.15.4 on the same
narrow band path.
Signed-off-by: Xavier Razavet <xavier.razavet@nxp.com>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
This config will be used to indicate if a platform
has the support for monolithic BT feature.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move default of monolithic and fw loader, options, etc to the
common kconfig files rather than defaulting in soc file.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Consolidate the ROM RAMLOADER config to be in one place,
add a new Kconfig file to be included by the SOCs with the feature.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The CONFIG_USB_MCUX_CONTROLLER_TYPE choice config
is not necessary, let's just remove it. Theoretically,
if there was an SOC with the EHCI and LPCIP3511, then
it might cause a build error, but there is no SOC
which is supported on this legacy driver that has that.
Remove all settings of it in the SOC files.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Currently this code related to how to configure the
flash size and address when using flexspi to XIP is copy
pasted in all sort of places and ways all over the tree,
let's clean this up and have single point of control over
this configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
- Added a flash runner configuration for rw, mcx, lpc, kinetis and imxrt,
used for sysbuild multi-image projects like MCUBoot.
- Solved the mass erase issue.
- The sysbuild project "west flash --erase" command caused
the mass_erase->flash_img1->reset->mass_erase->
flash_img2->reset sequence.
It was fixed to the mass_erase->flash_img1->
flash_img2->reset sequence.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Convert the hci_nxp.c HCI driver to use the new HCI driver API. Also move
the driver binding under dts/bindings/bluetooth, like all other HCI driver
bindings.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The drivers should be independent after the move to the new HCI driver
API. Having them as a choice also has unexpected consequences with some
drivers being unexpectedly enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enable monolithic build for all BLE apps.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Add header file for flash configuration blocks
which is an image header consumed by the RW bootrom.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add DT node entries to RW for DAC and ADC.
Support the SOC required initialization of the DAC and ADC on RW.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Mask for FLEXSPI clock divider was being used when setting the FLEXSPI
clock selector value. Correct this to use the mask for the selector
instead of the divider.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add code to clock and release reset signal for USBOTG controller on
RW6xx SOC when USB is enabled, and add KConfig selection to indicate to
build system which USB controller this SOC uses.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
MEMC_MCUX_FLEXSPI depends on code relocation being enabled on parts that
XIP from the FlexSPI by default and requires a string describing the RAM
region to relocate code into. Add these Kconfigs to the RW SOC port.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
