Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove the deprecated HCI driver API which was provided by the hci_driver.h
header file. The deprecation happened in Zephyr 3.7, so the API can now be
removed for Zephyr 4.1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/controller directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Use PDU_BIS_LLID_FRAMED in empty PDUs for framed BIS
Allocate room for header when calculating max_pdu for framed BIS
Set group_sync_delay, stream_sync_delay and framed properly for BIS
broadcaster
Add missing call to isoal_tx_event_prepare() for BIS
Signed-off-by: Troels Nilsson <trnn@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ISOAL_PSN_IGNORE implementation when adjusting
Sequence Number during overlap with current CIG event.
Reuse the implementation from non-PSN ignore implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Troels Nilsson <trnn@demant.com>
A Host shall consider any error code that it does not
explicitly understand equivalent to the error code
Unspecified Error (0x1F).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_CRYPTO_SUPPORT so that preliminary port to
support nRF54L15 SoC can be upstreamed without encryption
support.
ENTROPY_GENERATOR now selected when BT_CTLR_CRYPTO enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix Extended Advertising Parameter check to exclude legacy
high duty cycle directed advertising from validating the
intervals as advertising interval parameter values are not
applicable for high duty cycle directed advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The BIGinfo PDU bitsets were not accessed in a portable maner for
endianness independence, and need to be handled as bit-manipulations.
Add utility functions to access PDU bitset variables independent of
endianness. Use macros to abstract the offsets and widths.
Conversion of BIG_Handle to LE in HCI layer incorrectly use
sys_cpu_to_le16, which fail because target type is 8-bit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Invalid values should result in BT_HCI_ERR_INVALID_PARAM
The interval check should only fail with
BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL if the requested range
cannot be fulfilled by the controller (ie. there is no overlap
with the supported range)
Fixes EBQ tests HCI/DDI/BI-53-C through HCI/DDI/BI-61-C and
HCI/CCO/BI-64-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add support for vendor specific Set Scan Request Reports command and
Scan Request Received Event, available for legacy advertising.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Advertising data has to be truncated at a PDU boundary
Similar to earlier fix for extended advertising reports
Found in several EBQ tests, including LL/DDI/SCN/BV-25-C,
LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-46-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix incorrect HCI ISO data length check for Broadcast ISO
transmissions.
Removed initially added code when preliminary support for
Broadcast ISO was implemented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning,
Active, Properly Ignore RFU Fields
Several minor modifications made to le_ext_adv_report() to
properly ignore any invalid fields present in the received PDUs
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix bitfield crossing byte boundary - replaced with macros for
setting/getting the values
Fix missing endianness conversion for evt_cntr
Changed aa from uint32_t to uint8_t[4] to align with the rest of
the code and avoid any potential endianness issues
Signed-off-by: Troels Nilsson <trnn@demant.com>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Intent is to pass Ellisys ISOAL quality tests for framed TX scenarios
where the TX SDU includes a time stamp that is not based on the
controller's clock.
Changes:
-- Include controller's reception time as a separate field in the TX SDU
information
-- Include decision on whether SDU time stamp is valid and based on the
controller's clock
-- Arbitrate and select / compute time stamp for the SDU
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
If there are duplicate handles the Controller shall return the
error code Invalid HCI Command Parameters (0x12)
Fixes a failure in the EBQ test LE/AdvExt/Req-01 (part of the Ellisys
quality test suite)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Truncation of advertising data has to be done at a PDU
boundary; Including only part of a PDUs advertising data is
not allowed
Signed-off-by: Troels Nilsson <trnn@demant.com>
An advertising report must not be generated unless the AUX_ADV_IND
has been received (for ADV_EXT_IND with an auxptr)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fixing error: undefined reference to 'vs_set_min_used_chans'
when building with 'BT_HCI_VS_EXT' option disabled.
Signed-off-by: Michał Grochala <michal.grochala@nordicsemi.no>
