When KERNEL was not defined (unittest), the call to init_testing was
used to set a longjump target using 'stack_fail'. When triggered,
this was actually causing a segfault, because longjmp is only valid
if going directly up the stack. Since init_testing returned, it was
no longer on the stack. Instead, that logic MUST be inlined.
Signed-off-by: Yuval Peress <peress@google.com>
The current zassert macro uses implicit conversion to boolean which
has implication on analysis tools like clang-tidy-14. This add an
aditional step to create a boolean value for the evaluation instead
use the string direct which allows run analysis tool without this
warning/error.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds the bits to pin the GCOV sections to the pinned
sections so they can be accessed during boot when demand
paging is enabled. Or else accessing them would result in
page faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds an ALIGN statement to the rodata linker snippet
for coverage. Without this, sometimes the section is not
aligned, but __init_array_start indicates an aligned
address, resulting in incorrect function pointers.
So align it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit introduces a dedicated unit testing board.
Today, a dedicated Zephyr unit testing scheme exists but is different
from how a Zephyr build generally works.
For example Kconfig is not possible, resulting on various different
hacks to pass Kconfig settings from test cases / testcase.yaml through
CMake to the code.
Some directly as compile definitions, some as header files with forced
inclusion on sources, some with wrapper flags which again results in
different define being enabled. There is even cases where a second
forced header inclusion undefines previous defines.
Unit test often does a manual check for the right boards, like this:
> if (NOT BOARD STREQUAL unit_testing)
> message(FATAL_ERROR "This project can only be used with...")
> endif()
Introducing a dedicated unit_testing board under `tests/root` allows
us to use Kconfig in unit test samples, and thus proper `prj.conf` and
extra Kconfig fragments.
Generation of autoconf.h so the overall architecture follows regular
Zephyr builds.
Proper and uniform error messages when invalid board is selected.
The unit_testing board and arch is located under: `subsys/testsuite` so
that it is only available when find_package(Zephyr COMPONENTS unittest)
is used, and not available for regular Zephyr builds.
Kconfig generates autoconf.h which is applied as compile flag to
test binary which means that kconfig defines placed in ztest.h can now
be removed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a detailed docstring to the zassume() macro that describes what it does
and how its usage is different from zassert.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add duration stats at both suite level and unit test
level into test summary. The duration is at second
level. Since the new ztest fx can execute a test suite
for multiple times, the worst/longest test duration is
collected.
Note that even a skipped test can have a duration greater
than 0 because the skip operation itself is not free.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Previously, unit test duration is collected within the
TC_START and Z_TC_END_RESULT macros. With existing tests,
the TC_START macro can be invoked by both the ztest fx
and the tests themselves. And the TC_START macro definition
went lengths to avoid the interference when it is invoked
within a unit test. This commit decouple the time collection
and the TC_STRAT/Z_TC_END_RESULT macros to fix this issue.
Now only the (old) ztest framework is responsible for the
test duration measure. The test duration stats of new ztest
fx is different from this btw.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Add test summary after all test suites finish running.
The summary can be one-line or verbose, which is configured
with CONFIG_ZTEST_VERBOSE_SUMMARY. The one-line summary covers
overall suite stats. The verbose summary covers each test
function within the suite besides the one-line summary.
The new ztest output ultimately go through the printk. If
printk go through the logging subsystem, there may be log
messages dropped. And if log_panic is invoked, log messages
can be flushed in a mess. So several explicit log flush
are used when printing summary to ensure no content is lost
and content is in good shape.
Some macros are shared between old and new ztests. Such as
TC_START_PRINT and TC_END_PRINT. The are defined accordingly.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Support verbose or one-line summary at test suite level.
Support verbose or no output at test function level.
Totally 4 combinations configurable:
- function verbose + suite verbose
- function verbose + suite oneline
- no function output + suite verbose
- no function output + suite oneline
Signed-off-by: Ming Shao <ming.shao@intel.com>
Updates the ztest_test_fail() function to allow failures in setup.
When executed, a failed assert will fail every test in the suite owning
the setup function. This was verified by adding a suite which asserts
in the setup function and has a test that should pass. During
exeuction, ztest marks the test as failing.
In order to verify exection I also added 2 new APIs:
- ZTEST_EXPECT_FAIL(suite_name, test_name)
- ZTEST_EXPECT_SKIP(suite_name, test_name)
Signed-off-by: Yuval Peress <peress@google.com>
In scenarios where test_main is overridden ztest_run_all
may be invoked multiple times leading to the verify check to
fail inadvertently.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
If the test is run with the config NO_OPTIMIZATIONS enabled then the
stack size usage increases by around 80% for ARM platforms.
Increase the stack size used in test cases that enables building with no
optimizations for ARM.
Update description on TEST_ARM_CORTEX_M since it was outdated and said
it was only used for a single purpose.
Fixes: #47930Fixes: #47929Fixes: #47855
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The signal handler needs to return gracefully. When multiple
tests assert, the first assert will raise SIGABRT and the signal
handler will run and the test will stop running.
The second assert will raise SIGABRT but the signal handler
will not be called, therefore the test PASS/FAIL status is not
updated correctly.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
A test case may invoke run_all multiple times, causing
logic for listing tests to run tests on second call.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Make the option TEST_EXTRA_STACK_SIZE depend on Tests, otherwise it will
appear in each generated .config file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This config option is only used with ztest, so move it under ztest.
Otherwise it appears in .config when you build ANY application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit removes the NULL check on the idle thread array
(`idle_tid`) because it is statically declared and will never be NULL.
This fixes the "comparison will always evaluate as ‘false’" warning
generated by the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add test summary after all test suites finish running.
The summary can be one-line or verbose, which is configured
with CONFIG_ZTEST_VERBOSE_SUMMARY. The one-line summary covers
overall suite stats. The verbose summary covers each test
function within the suite besides the one-line summary.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Support verbose or one-line summary at test suite level.
Support verbose or no output at test function level.
Totally 4 combinations configurable:
- function verbose + suite verbose
- function verbose + suite oneline
- no function output + suite verbose
- no function output + suite oneline
Signed-off-by: Ming Shao <ming.shao@intel.com>
Documentation now includes:
- How to create a test suite
- How to use predicates
- How to use setup/before/after/teardown
- How to use test rules
- Direct people to use FFF instead of ztest mock
Fixes#47420
Signed-off-by: Yuval Peress <peress@google.com>
Add macro Z_TEST_SKIP_IFNDEF which is used when you want to skip test
if configuration option is not enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The addition of the assumption API introduced a bug where a skipped test
would subsequently skip later tests within the same suite. A skipped test
was being treated as an entire skipped test suite.
Keep track of tests being skipped due to skipping in the suite setup versus
being skipped within their test function.
TEST=west build -p -b native_posix tests/kernel/condvar/condvar_api/ -t run
TEST=twister -T tests/ztest -p native_posix
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an assume API which works like JUnit's. Assumptions can be made
at any point before your test returns (setup, before, and during the
test). If an assumption fails, the test will be marked as skipped.
This helps avoid a cascading affect of failed tests when a base
feature breaks. The feature is expected to have tests and the tests
which depend on it should be skipped (not failed) if that feature
is broken.
Issue #42472
Signed-off-by: Yuval Peress <peress@google.com>
When system clock is set globally for the test which is executed
on various qemu platforms it may happen that clock is set too
high compared to CPU clock frequency. In that case test may stuck.
Added check and test skipping in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The malloc partition may actually be empty, if so, don't try to add it to
the domain as that will generate an error.
Signed-off-by: Keith Packard <keithp@keithp.com>
On X86 platforms, the interrupt trigger method has been
changed to use APIC IPI, we don't use INT command to trigger
interrupt, so remove this unused macro.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
On X86 platforms, the interrupt trigger method has been changed
from using INT command to using APIC IPI, we need to make sure
the IPI interrupt is handled before do our check, so add some
nop operations.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Added test command line arguments to filter
which tests are executed. Filtered tests should follow
suiteA::test1,suiteB::test2 format.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
output of ztest is not easy to ready with many testsuites running in
sequence, make it a bit more readable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added macro to test that a value falls within a defined range, including
the provided end points.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Enable ZTEST_DO_THE_SHUFFLE to shuffle the order tests are ran.
Additional configs ZTEST_DO_THE_SHUFFLE_SUITE_REPEAT_COUNT
ZTEST_DO_THE_SHUFFLE_TEST_REPEAT_COUNT specify the number of times
the test or suite is executed.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ztest unittest module relies on some headers that fake the real
ones, e.g. <zephyr/arch/cpu.h>. When new header location was introduced,
their path was not updates. This patch fixes this problem and provides
ztest with both, legacy and new include paths so that it can keep
working on both scenarios.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
define test run id and make it available to ztest. This will be used to
verify we are evaluating the same test we have just built and flashed
and that we are not looking at some old output.
Existing code in ztest will use this, and twister will define the run
id.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure that the test rules' `before` function runs before the
suite's. This allows the suite to override any defaults set by the
rule.
Signed-off-by: Yuval Peress <peress@google.com>
The idle thread got an index suffix in #23536 to make it easier to
identify different idle threads on different cores. This looks out of
place on single-core devices when the idle thread is listed next to
other kernel threads, such as main.
Remove the idle thread index on single-core platforms, and replace all
references to this format in tests and documentation.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Delay start of threads and timer to ensure that setup
is completed. Especially, vital on multiple CPUs.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The `handle_signal()` function in the new ztest API (`ztest_new.c`) uses
an array of strings to lookup a friendly name for each test phase, but
the array only has three elements despite there being six test phases.
This can lead to an out-of-bounds issue. Replace the array with a helper
function and switch statement.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
We emulate the interrupt by sending the IPI to core itself by
the local APIC for x86 platfrom.
But in X2APIC mode, this no longer works. So we emulate the
interrupt the by writing the IA32_X2APIC_SELF_IPI MSR to send
IPI to the core itself via LOAPIC also. According to SDM vol.3
chapter 10.12.11.
Fixes#42108
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change introduced some weird failures on x86 that will take some
time to untangle, and wasn't a particularly important feature to
merge. Revert for now.
This reverts commit adc901aa6a.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some hardware has "interesting" configuration like asymmetric default
interrupt masking (the intel_adsp devices in particular, but x86's
IO-APIC driver has tripped over this in the past too) that needs
special treatment if you want to run something on "core 1"
specifically, and 1cpu test cases pretty much by definition are going
to have been written without SMP details in mind. Switch the logic
around a tiny bit such that these test cases always run on CPU ID zero
explicitly.
Actually in practice this was ALMOST guaranteed to be true already,
because test setup and happens serially, having been started on the
main thread, which starts on CPU 0 by definition. Then the test
teardown aborts all the spawned threads that might have been running
on CPUs 1+, so those reach idle, and the next test case starts
syncronously on the same thread (and thus CPU) where it started. But
nonetheless that wasn't actually enforced, and we've found at least
one simulation environment where timing conspires to break things.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some SOCs cannot be flashed reliably in low power modes. If
CONFIG_ZTEST_NO_YIELD is selected, do not yield to the idle thread after
testsuite completes, so that the SOC will not enter low power mode.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add ztest_test_skip() support to non-kernel tests by implementing
long jump buffer and TC_SKIP result collection.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Make it possible to "finish" with fewer bytes than what was "claimed".
This was possible before on the get side, but the put side was
cummulative wrt finish. The revamp made it cummulative on both sides.
Turns out that existing users rely on the opposite behavior which is
more logical and useful. So make both sides that way.
Adjust documentation, test case and users accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Change the CPU_CORTEX_R kconfig option to CPU_AARCH32_CORTEX_R to
distinguish the armv7 version from the armv8 version of Cortex-R.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Move the unittest.cmake to the new Zephyr CMake modules dir.
This allows us to have a single Zephyr CMake package and load unittest
module as: 'find_package(Zephyr COMPONENTS unittest)'
This unifies the way Zephyr package is sourced and removes the need for
a dedicated ZephyrUnittest package.
Deprecate the use of: 'find_package(ZephyrUnittest)'
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When system clock is set globally for the test which is executed
on various qemu platforms it may happen that clock is set too
high compared to CPU clock frequency. In that case test may stuck.
Added check and test skipping in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix an issue where a test's suite name was misspelled and thus the
test never ran because it wasn't associated with a suite. Example:
ZTEST_SUITE(my_suite, NULL, NULL, NULL, NULL, NULL);
ZTEST(myy_suite, test)
{
}
The above will no longer pass since `myy_suite` with a double `y` will
fail the verification.
Signed-off-by: Yuval Peress <peress@google.com>
Use UTIL_CAT which resolves input arguments instead of direct
preprocessor concatenation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
tc_util.h is also included by unit tests and in that case it
cannot have dependencies to subsystems. Including log_ctrl.h
only for ARCH_POSIX where it is needed to flush logs before
exit.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flushing logs here is especially vital if LOG_PRINTK is enabled.
In that case printk goes to log and without flushing after all
tests are run you will not get the final report out.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A lot of tests need to be able to get their current tid and do some
action with it. It makes sense for the `before` function/rule to be
able to run in the same thread as the test. Note that the `after`
function does not run in the same thread because we need to guarantee
that it will run.
Signed-off-by: Yuval Peress <peress@google.com>
MIPS (Microprocessor without Interlocked Pipelined Stages) is a
instruction set architecture (ISA) developed by MIPS Computer
Systems, now MIPS Technologies.
This commit provides MIPS architecture support to Zephyr. It is
compatible with the MIPS32 Release 1 specification.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Replace all get_dev_data()/get_dev_config() accessor utilities with
dev->data and dev->config.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For x86, make the testing purpose trigger_irq() function to send
interrupt processor interrupt to CPU by APIC, instead of executing
INT instruction. Doing this because:
1. It can be controlled by irq lock, more close to trigger irq.
2. We don't need to hardcode the interrupt vector.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Using macro which will resolve complex SUITE_NAME. Without
it wrong name was assigned when SUITE_NAME was consists of
concatenated defines.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add maximum timeout used for conversion to Kconfig. Option is used
to determine which conversion algorithm to use: faster but overflowing
earlier or slower without early overflow.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The overall code coverage report of mps2_an385 was blocked by the
tests/net/lib/coap, the error message shows "No Mem available to
continue dump". So we enlarge the gcov heap size to prevent this
situation, try to make the report can be generated at least.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Fix initial thread priority and move starting of the
test timer after threads initialization to ensure that
it does not expire before threads are initiated.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Currently, ztress is not supporting SMP, mainly because of
cpu load calculation algorithm. It may be re-enabled in the
future.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
1. Test suites in prior ztest serve no purpose other than logical
ordering of tests into a named-group. Move the construct of setup and
teardown into the test suite and away from individual tests.
Additionally, add the constructs of before/after to the test suites.
This model more closely resembels other testing frameworks such as gTest
and Junit.
2. Test can be added to a suite by using ZTEST() or ZTEST_F() where _F
stands for fixture. In the case where _F is used, the argument `this`
will be provided with the type `struct suite_name##_fixture*`. Again,
this models other modern testing frameworks and allows the test to
directly access the already set up data related to the test suite.
3. Add the concept of test rules (from Junit). Rules are similar to the
before/after functions of the test suites but are global and run on all
suites. An example of a test rule can be to check that nothing was
logged to ERROR. The rule can cause the test to fail if anything was
logged to ERROR during an integration test. Another example would be a
rule that verifies that tests ran within some defined timeout.
Signed-off-by: Yuval Peress <peress@google.com>
Added framework for concurrency testing. Framework setup multiple
priority contexts and executes user handlers in that context. Test
terminates after certain number of repetitions or preemptions or
when timeout occurs. It can also be aborted by the user.
Framework can be used for testing resiliency to preemptions.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Two CMake policies has been removed:
CMP0000 was introduced in CMake 2.6 and set to OLD, but with all Zephyr
CMake files using cmake_minimum_required() then there is no
reason for having this policy to OLD.
CMP0002 was introduced in CMake 2.6 and was set to NEW.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Taking random numbers from hardware may be time consuming thus
it was deferred to a work queue. On the other hand, taking them
from software algorithm is fast. Use xoshiro128++ when enabled,
instead of real random numbers from hardware RNG generator. They
are use for random intervals in the test so no security concerns
here.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add guard to not pend until all logs are flushed when default
logging thread is disabled. In that case, logging has no control
where logs are processed and sleeping may not lead to flushing
log data. That may result in test hanging.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When deferred mode is used, logging is using lowest priority
thread to process the logs. When test cases are performed one
by one processor never reaches lowest priority thread until
whole suite is completed. Added flushing after each test case.
Feature is optional (by default enabled).
CONFIG_TEST_LOGGING_FLUSH_AFTER_TEST=n to disable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This change adds `k_cycle_get_64()` on platforms that
support a 64-bit cycle counter.
The interface functions `arch_k_cycle_get_64()` and
`sys_clock_cycle_get_64()` are also introduced.
Fixes#39934
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Introduce a weak implementation of test_main() which calls:
* ztest_run_registered_test_suites(NULL);
* ztest_verify_all_registered_test_suites_ran();
This will attempt to run all registered test suites and verify that
they each ran.
Signed-off-by: Yuval Peress <peress@chromium.org>
Add new functionality to ztest to improve test modularity. The two
primary new entry points are:
* ztest_register_test_suite
* ztest_run_registered_test_suites
When registering a new test suite, users provide the name as well as
an optional predicate used to filter the tests for each run. Using NULL
as the predicate ensures that the test is run exactly once (after which
it is automatically filtered from future runs).
Calls to ztest_run_registered_test_suites take a state pointer as an
argument. This allows the the pragma functions to decide whether the
test should be run.
The biggest benefit of this system (other than the ability to filter
tests and maintain a larger test state) is the ability to better
modularize the test source code. Instead of all the various tests
having to coordinate and the main function having to know which tests
to run, each source file manages registering its own test
suite and handling the conditions for running the suite.
Signed-off-by: Yuval Peress <peress@chromium.org>
Enable the existing aarch32 Cortex-R implementation of
timestamp_serialize() for aarch32 Cortex-A CPUs as well.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@Weidmueller.com>
Issue #38643
Introduce a more powerful and well established mocking framework
into Zephyr. It also allows running the actual FFF tests using the
zephyr SDK and ztest framework to ensure compatibility.
As per TSC meeting, the fff.h header was directly added to
subsys/testsuite/include/. As per the guidelines, the file is exactly
the same as it is in FFF's library, but re-styled with clang-format.
The west.yml entry was added using the "ci" group and filtered by
default. (note that the tests will break until the CI actually
specifies that the group is needed).
Signed-off-by: Yuval Peress <peress@google.com>
According to the rule MISRAC-2012 21.4.a the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
It is a deliberate deviation.
Found as a coding guideline violation (MISRA R21.4.a) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Busy simulator is using counter device and entropy device to
generate random cpu load. Counter device cofiguration can be
used to set cpu load interrupt priority and optional pin that
can be set during the load.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to the rule MISRAC-2012 21.4.b the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
Found as a coding guideline violation (MISRA R21.4.b) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
[DL: Commit 7f08061f0c reverts this.
Since this is useful, let's re-apply this.]
Fixes#34696
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds FPU sharing support with a lazy context switching algorithm.
Every thread is allowed to use FPU/SIMD registers. In fact, the compiler
may insert FPU reg accesses in anycontext to optimize even non-FP code
unless the -mgeneral-regs-only compiler flag is used, but Zephyr
currently doesn't support such a build.
It is therefore possible to do FP access in IRS as well with this patch
although IRQs are then disabled to prevent nested IRQs in such cases.
Because the thread object grows in size, some tests have to be adjusted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Added support for no multithreading case where test cases are
called directly from main(). On failure in ztest assert macro,
macro returns from the function. It implies that ztest assert
macros can only be called in the test function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We have a few remaining tests where ztest module is not used directly,
and instead lower-level tc_util.h is used (where ztest also uses that
header). Supposedly, there're good reasons for that. However, tc_util.h
tests have output which is somewhat inconsistent with ztest output,
which may be a problem with automated parsing of test results, e.g. in
CI systems.
So, factor out code to mark testsuite start/end from ztest.c to
tc_util.h as TC_SUITE_START() and TC_SUITE_END() macros, to allow
tc_util.h based tests to produce output fully consistent with
ztest, while avoiding duplicate of code. TC_SUITE_END() accepts
result code (TC_PASS/TC_FAIL), similar to existing TC_END_REPORT().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
cleanup_test() was missing final else statement in
the if else if construct. This commit adds else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
By default ztest thread is running at the priority `-1`. This value is
invalid when the testcase is running in cooperative mode only. Set
default ztest thread priority to `-2` if this is the case. The fix is
modeled on the approach used to define the default
`MAIN_THREAD_PRIORITY`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit fixes the build error: "error implementation of
timestamp_serialize() not provided for your CPU target" for
fvp_baser_aemv8r tests.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The interrupt_util.h provides utils of trigger irq, now move them into
testsuite. All of the needed test cases can make use of them.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Without this fix, ztest_set_assert_valid() can only be used when
CONFIG_ZTEST_FATAL_HOOK is set.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
We need to do a few things differently if we are to support
a virtual memory map, i.e. CONFIG_MMU where CONFIG_KERNEL_VM_BASE
is not the same as CONFIG_SRAM_BASE_ADDRESS.
- All sections must be specified with a VMA and LMA, where
VMA is the virtual address and LMA is the physical memory
location.
- All sections must be specified with ALIGN_WITH_INPUT to
keep VMAs and LMAs synchronized
To do this, the existing linker macros need some adjustment:
- GROUP_LINK_IN undefined when CONFIG_KERNEL_VM_BASE is not
the same as CONFIG_SRAM_BASE_ADDRESS.
- New macro GROUP_ROM_LINK_IN for text/rodata sections
- New macro GROUP_NOLOAD_LINK_IN for bss/noinit sections
- Implicit ALIGN_WITH_INPUT for all sections
GROUP_FOLLOWS_AT is unused anywhere in the kernel for years
now and has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add execution time for testing result of each ztest testcase as:
START - test_sem_multi_take_timeout_diff_sem
PASS - test_sem_multi_take_timeout_diff_sem in 2.54 seconds
Fix#32137.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add a dependency on TEST_ARM_CORTEX_M switch, so it
only gets switched on when building tests, not samples,
as originally intended.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
zassert_within should also compare on equality instead
of only greater/lower.
example:
zassert_within(1,1,0); // should return true
zassert_within(1,2,1); // should return true
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is in order to reduce the redundancy code writing for fatal and
assert handler for error case testing. They can be used both in kernel
and userspace, and are also SMP safe.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
* give user permission to gcov bss section
* expand the size of iccm and dccm to 1M
Signed-off-by: Jingru Wang <jingru@synopsys.com>
During coverage reports generation in C++ code gcov_coverage_dump()
function would get stuck in endless loop. Fix by checking list head
pointer with current list pointer.
Signed-off-by: Marko Poljanić <mpoljanic@gmail.com>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Updated the GCOV_COUNTERS value, without which the coverage data
was corrupted when gcc 10.2 was used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit provides the timestamp_serialize() define for the SPARC
architecture.
Co-authored-by: Nikolaus Huber <nikolaus.huber.melk@gmail.com>
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Unit tests may include C++ code, so ensure the compiler flags are
consistent to avoid link errors.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Many functions signal success by returning a return code of zero. Add
an assertion for this.
Some functions can return a positive value to indicate success, where
they want to convey some information. This is not handled by this
assert function.
Signed-off-by: Simon Glass <sjg@chromium.org>
This override header declares structures and inline functions, which
must be given C language linkage to avoid conflicting declaration
errors with other headers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Clean up comment typos and wording for expect data functions.
Add a cast to (void *) to match convention set in expect value;
this allows the caller to avoid casting on every single call.
Signed-off-by: Jett Rink <jettrink@google.com>
If you tried to use more mock parameters than were set in
CONFIG_ZTEST_PARAMETER_COUNT, you would get a random seg fault somewhere
unrelated to the mocking parameter as we would use memory past an array
bounds.
Signed-off-by: Jett Rink <jettrink@google.com>
If one enables mocking, then they most likely want more than 1 mockable
or verifiable parameter by default. Bump the default number of mockable
parameters to 10 to handle most cases without needing to touch an
additional Kconfig option.
Signed-off-by: Jett Rink <jettrink@google.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Coverity is not able to detect that the call to ztest_test_fail()
will not return so it emits a warning on a later access to
param. Add a return; after the call so coverity won't complain.
Fixes#25790
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity warnings on dead loop code. We know this can
occur if the NUM_CPUHOLD is defined as zero which occurs
when CONFIG_SMP is false.
Fixes#20516Fixes#20517
Signed-off-by: David Leach <david.leach@nxp.com>
At present these can be very long since they include the full path of
the filename with the error.
Assertion failed at /home/sglass/cosarm/zephry/zephyrproject/
zephyr/tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
Reduce the length by omitting the current directory (where the tests
are being run) from the output:
Assertion failed at tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
This improves usability for people running tests locally.
Signed-off-by: Simon Glass <sjg@chromium.org>
The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a ztest test case creates child thread(s), and one of the
descendent threads invokes ztest_test_pass(), ztest_test_fail(),
or ztest_thread_skip(), only that descendent thread will be
aborted.
Then ztest will try to run the next scenario on the ztest_thread
which is already in use. This was causing corruption issues on
SMP systems, and possibly other subtle, hard-to-debug
situations.
This patch ensures that ztest_thread is always dead before
re-using it, as run_test() now attempts to join on it instead
of using a semaphore.
The ztest_test_* functions now ensure that the ztest_thread
is always aborted, in addition to the current thread.
This isn't perfect. If the testcase spawned other threads,
they will keep running. The most robust way to fix this is to
iterate over all non-essential threads in the system and abort
them. Unfortunately, Zephyr doesn't have a facility to do
this safely.
It would also be simpler to re-use thread objects if
k_thread_create() could detect whether the thread was already
active and abort it, but this is currently not possible
since k_thread_create() can be used with uninitialzed
thread object memory and no checks are possible. This
may be improved in the future, see #23030.
Fixes: #22738
Partial fix for: #24713
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I was missing mocking api to compare data under an address pointed
by a parameter as some functions may copy buffers before passing
further.
Created ztest_expect_data and ztest_check_expected_data.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the introduction of ZephyrConfig.cmake all parts of CMake code
should rely on the CMake ZEPHYR_BASE variable instead of the environment
setting.
This ensures that after the first CMake invocation, then all subsequent
invocation in same build folder will use same zephyr base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Only dump data when we are interested in the analysing coverage. By
default just collect the data.
CONFIG_COVERAGE_DUMP is used to control this behaviour.
This will help speed up sanitycheck and will avoid lots of noise in the
log when some tests with coverage enabled failed. Dumping data to
console is also suspected to be one of the reason why qemu hangs in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
If the test exits from some APIs like ztest_test_pass(),
ztest_test_skip(), or a test crashes out, the teardown
function is never run.
Fixes: #16329
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The start/stop functions do a whole pile of supervisor-
only stuff; resolve this by making them ztest-specific
system calls.
Fixes: #20927
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use of the test suite in C++ causes warnings because use of defined
cast operators have the wrong target type. For example, many standard
container APIs use operator bool() to test for empty containers. Code
like zassert_true(v, "") fails to build when the test parameter is an
int. Correct the argument type.
This also causes any use of an assignment expression as a conditional
in zassert to be diagnosed as a potential error.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Recent changes to architecture headers did not address ztest headers due
to this bug in sanitycheck. Fixing them now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We don't have to build an image for running test timeutil. We
can just build a native app to test it. So move it into "unit"
directory.
Also, add 64-bit support for unit testing framework.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several C++ std library headers use __str as internal
variable names. If those headers are included after
tc_util.h is included those headers fail to compile
because tc_util.h defined __str to be a macro.
Fixed by renaming the __str macro to TC_STR.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Move tinycrypt related header into test and make those tests only build
on native_posix. The tests are unit tests, ie. testing tinycrypt
functionality only without any dependency on the underlying system.
Long term we should move those to be true unit tests and create
functional and integration tests that use tinycrypt in the context of
Zephyr and for real use-cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The log mechanism, even in immediate mode, adds somewhere
between 1K-2K of footprint to applications that use it.
We want to standardize the logging APIs for all logging
within the kernel, but need to not let platforms with
very constrained RAM/ROM in the dust.
This patch introduces CONFIG_LOG_MINIMAL, which is a very
thin wrapper to printk(). It supports the APIs expressed
in logging/log.h.
This will be the new default for test cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test suite is filled with tests that make assumptions (e.g. about
exactly when other threads will be scheduled) that don't work when
there is another CPU available to handle the load.
Add a feature to the test suite that can "hold" all but one CPU while
the test executes, leveraging the very nice setup/teardown callbacks
to do it. When there is only one CPU, this becomes a very fast noop
of course.
Note that the hold is done by disabling interrupts and spinning, so it
comes with significant CPU cost and tends to drive up the load on the
CI system (and cause other spurious failures on unrelated tests!), so
this can't be used for long-running test cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
