Instead of having 2 separate and non-equal checks for
capabilities in ASCS and the Broadcast Sink, there is now
a single function in pacs.c that performs the
check.
This reduces code size and makes it easier to maintain.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is an unused variable, which may result in a compiler warning.
Since we can not guarantee the value of this variable
we can not test for it, so it is removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix various unit test build warnings, unused variables, set but unused
variables, wrong types etc...
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There is a unittest to verify that the distribute broadcast code procedure
is not called with the same peer twice. This test requires a minimum
of two connections, so we disable this test when only 1 connection
can be made
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Some of the unittests had an incorrect project name in the
CMakeList.txt file
This is corrected here
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
These callbacks are trigger for changes that affect the entire
broadcast source, such as the BIG started and terminated events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These callbacks are trigger for changes that affect the entire
broadcast source, such as the BIG started and terminated events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ASCS unit tests had various errors after adding support for
dynamic registration.
Several tests did not properly clean up after failure, causing other
tests to fail when they shouldn't.
Moved the register tests to their own file as they should not
do the register in the "before" function.
The test_ascs_unregister_with_ases_in_config_state test was also
removed, as it had both issues and the state that it wants to test
cannot be reached with the current API - It is not possible to
put an ASE in the configured state without callbacks,
and registered callbacks prevents us from calling
bt_bap_unicast_server_unregister to trigger the case as that can
only be done if callbacks are unregistered. Since unregistering
callbacks also puts all ASEs to the idle state, it is not possible
to call bt_bap_unicast_server_unregister for a non-idle ASE.
The testcase.yaml was also missing some Kconfig options to
properly enable the client tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Added helper functions to set and get broadcast name
for codec capabilities and codec configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If we get an error/rejection from the CAP acceptor when
performing the Unicast Audio Start or Stop procedure then
we need to abort the procedure and let the application determine
what the next step is.
This change triggered a corner case when connecting to multiple
CAP acceptors as the CAP initiatior. This was also fixed as part
of this.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
Add unit tests of the CCID functions.
To support these new tests, the GATT mocks need to
support dynamic GATT DB so we can add and remove
a service that contains CCIDs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add more parameter checking for the unittests for the
CAP procedure 'broadcast reception stop'
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The unicast_stop function is changed to primarily do a
BAP disable instead of a release, with optional
support for releasing the streams once they have been disabled.
This also adds unittests for the procedure which also
allow us to remove the invalid param testing from the BSIM tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added helper functions to set and get assisted listening
stream values for codec capabilities and codec configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unit tests needed to enable the hidden Kconfig
BT_BAP_BASE. Instead of adding an additional Kconfig for this,
just enable one of the roles that enable it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the net_buf implementation from the networking subsystem to a library
as they have no dependency on the networking subsystem.
Network buffers are used in subsystems outside of networking
(e.g. Bluetooth, USB).
Fixes: #36374
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The CAP commander used bt_audio_valid_ltv which required
BT_BAP_STREAM to be enabled, but the CAP Commander does not
need BT_BAP_STREAM to be enabled.
Moved the function to audio.c which is always compiled for
the CAP Commander, thus removing the requirement for
BT_BAP_STREAM and the accompanying bt_bap_stream.c file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When calling bt_cap_initiator_unicast_audio_start on a set of streams
that are all in the streaming state we return early with -EALREADY.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast_start procedure should take a stream in any state
and put it in the streaming state. Adds tests with streams
in various states.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds unittests for the CAP Initiator start procedure, simply
verifying that the procedure works as well as
testing invalid parameters.
This also allows us to remove the invalid behavior checks
from the babblesim test implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
For the LE Audio unittests there exists a few mock files
that implement mock versions, or callbacks, for some of the
roles and features tested.
These have been moved to where they are actually used,
reducing the scope of these files.
This both allows the individual tests to implement their own
versions of it, but more importantly it prevents issues when
adding tests for these roles. For example, due to the
bap_unicast_client.c mock file, it is impossible to implement
unit tests for the unicast client, as the functions are already
defined.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactors teh BIS bitfield values used for ISO
and BAP.
Previously BIT(1) meant BIS index 1, which was a Zephyr choice
in the early days of ISO, as the BT Core spec did not use
a bitfield for BIS indexes.
Later the BASS specification came along and defined that
BIT(0) meant BIS index 1, which meant that we had to shift BIS
bitfields between BAP and ISO.
This commit refactors the ISO layer to use BIT(0) for Index 1 now,
which means that there is no longer a need for conversion
between the BAP and ISO layers, and that we can use a value
range defined by a BT Core spec (BASS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add validation of the number of ASEs in control point
write requests.
This validates that the number of ASEs
in the control point is not greater than the total number
of ASEs we support.
This also validates that the GATT MTU is large enough to
hold all the responses from the write since those can only be
sent as notifications and never be truncated.
Finally this validates and updates the size of the buffer used to
hold the responses, which may be an optimization for some builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement unit tests for the broadcast reception start procedure,
both with proper and with improper parameters.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
bt_audio_codec_cfg_get_chan_allocation() now takes an
extra parameter.
Let's set it to the value which keeps the old behaviour.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When creating a BAP broadcast source with bt_bap_broadcast_source_create
only the subgroup information is stored in the streams and the remaining
BIS specific information is not stored in the stream->codec_cfg,
which it should.
Fix is to store bis specific information also in stream codec config.
Updated broadcast source BSIM test to verify above usecase.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
These test only test the basic functionality of
bt_cap_initiator_unicast_discover so far, but will be expanded.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cfg_meta_get_pref_context
as absence of pref context in BAP implicitly means a unspecified
for LC3.
In the case that it is absent BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED
is the returned value.
While the metadata for codec cfg and codec cap are similar,
this only applies for codec cfg as per BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cap_get_max_codec_frames_per_sdu
as absence of max codec frames per SDU in BAP implicitly
means a single frame for LC3.
In the case that it is absent 1 is the returned value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cap_get_supported_audio_chan_counts
as absence of channel count in BAP implicitly means a single channel
for Lc3.
In the case that it is absent 1 is the returned value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
