Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the minimum supported cis_offset_min considering that
ACL radio event does not overlap with CIG event. Use the
calculated maximum of local and remote cis_offset_min in the
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In ull_llcp* some functions used in unittesting did not have
the llcp_ prefix
Although this is not a big issue since they are only used when
testing the module this commit adds the prefix so that we
have a more consistent naming
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update unittests for the following areas/controll procedures
- API
- collision handling
- invalid PDUs
- unsupported procedures
- buffer allocation
- TX queue
- Data Length Update
- PHY update
- Encryption
- Ping
- Version
- Channel map update
- Min. used channels
- Connection update
- SCA
- Terminate connection
- CTE request
- CIS create
- CIS terminate
Also moved the internal API tests from the ull_llcp* files
to the proper unittest C-file
Unused files are removed
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Remove boilerplate code:
> if (NOT BOARD STREQUAL unit_testing)
> message(FATAL_ERROR "This project can only be used with...")
> endif()
as that is now handled by boards.cmake when validating the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Implements PDU flow and unittest of CIS Create on Peripheral
Hooks CIS Create into the controller and fixes a few minor
things in ull to allow for running with NEW LLCP
Also handles CONFIG based comilation of CIS Create
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
