Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The test expects this feature to be enabled.
We should therefore enable explicitly instead of relying on
default values.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In ull_llcp* some functions used in unittesting did not have
the llcp_ prefix
Although this is not a big issue since they are only used when
testing the module this commit adds the prefix so that we
have a more consistent naming
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update unittests for the following areas/controll procedures
- API
- collision handling
- invalid PDUs
- unsupported procedures
- buffer allocation
- TX queue
- Data Length Update
- PHY update
- Encryption
- Ping
- Version
- Channel map update
- Min. used channels
- Connection update
- SCA
- Terminate connection
- CTE request
- CIS create
- CIS terminate
Also moved the internal API tests from the ull_llcp* files
to the proper unittest C-file
Unused files are removed
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove boilerplate code:
> if (NOT BOARD STREQUAL unit_testing)
> message(FATAL_ERROR "This project can only be used with...")
> endif()
as that is now handled by boards.cmake when validating the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Unit tests reposnsible for verification of collisions mitigation
didn't have handling for delayed completion of PHY Update control
procedure. The PHY Update is completed on event generated when
"at-instant" connection event is on air.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix the deprecated calls to loading ZephyrUnittest by replacing them
with `Zephyr COMPONENTS unittest`.
Signed-off-by: Yuval Peress <peress@google.com>
The pausing and timing of data transmission is changed in the PHY update
procedure, so that conformance tests passes. This requires an update
in unittests as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Only apply change to effective DLE times if current max times are too
small to accommodate. Similar to legacy implementation
Update unit tests to new DLE ntf behavior
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Upon collision either the error code for different procedure
collision or same procedure collision must be transmitted,
which is fixed in this PR. Previously always the error code
for same procedure collision was sent
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
