The commit fixes issue where flash_area_flatten has been used where
code was only supposed to erase devices by hardware requirement prior
to write, by replacing the call with flash_area_erase and supporting
logic to select proper path.
There have been following Kconfig options added:
- CONFIG_BT_MESH_BLOB_IO_FLASH_WITHOUT_ERASE
- CONFIG_BT_MESH_BLOB_IO_FLASH_WITH_ERASE
that are available for user depending on devices in the system and allow
to turn off paths that are not used by BLOB IO; for example if user
never writes to device with erase CONFIG_BT_MESH_BLOB_IO_FLASH_WITH_ERASE
will disable the path.
Both Kconfig options are y by default and enable all paths.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
MBEDTLS_AES_ROM_TABLES let Mbed TLS use precomputed AES tables instead
of generating them at runtime and placing in RAM. It clearly helps
reducing the RAM footprint, but at the same time it increases the ROM
one. In order to let the final user decide which kind of optimization
they prefer, we change the "select" statement with "imply".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Removes legacy configuration options. The same coverage is provided by
existing PSA_WANT_... selects.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Since the TinyCrypt library is being deprecated in Zephyr, this
commit set TinyCrypt usage in BT mesh as deprecated and it sets
Mbed TLS PSA Crypto API as the default option (when TF-M is not
available).
Tests are also updated in this commit.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adds support for using relay buffers and advertising set for the subnet
bridge feature, even if the relay feature is disabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds subnet bridging functionality to the network layer.
Also fixes brg_cfg_srv for minor issues to get it working.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Implements the Bridge Configuration Client model.
Adds opcodes for all Bridge messages to `foundation.h`. Adds client-side
support for these messages.
Adds a new Kconfig option for the Bridge Configuration Client model to
configure the waiting time for respones for acked messages.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
The `brg_cfg` module implements the states needed for subnet bridge
feature. It provides two states - enable state, and bridging table
state. APIs are provided to access and modify the states. The module
handles responsibility of persistence of the states.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adding documentation and function calles for the API's
in Bridge Configuration Client model and Bridge
Configuration Server model.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
This commit adds a KConfig option and an API to set the interval in
which chunks get send, in milliseconds.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Mbed TLS automatically sets PSA_WANT_KEY_TYPE_[RSA/ECC]_KEY_PAIR_BASIC
whenever "_IMPORT || _EXPORT || _GENERATE || _DERIVE" operations
are set. Therefore we just set the proper actions where required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The MBT server, as the MBT client currently sets the maximum chunk size
according to maximum supported segments in the accesss layer. This might
be suboptimal for some use cases.
The added Kconfig options give customers the option to fine tune it
themselves.
Future work will include addition of an API for the customer to modify
it also during runtime.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/mesh directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Commit add extension of configuration server by large
composition data server.
Mesh Protocol v1.1 specification
4.4.21.1
The Large Composition Data Server is a main model
that extends the Configuration Server model.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit add extension of configuration server by private
beacon server.
Mesh Protocol v1.1 specification
4.4.11.1
The Mesh Private Beacon Server model is a main model
that extends the Configuration Server model.
Configuration server and private beacon server shall always
exist together since they have bound states.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PR #72475 disabled default enabling of most Mbed TLS features.
This means that:
- CONFIG_MBEDTLS_CIPHER_AES_ENABLED needs to be manually enabled
when required;
- CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC does not need to
be (almost) always added because there is no default RSA
key-exchange enabled, so PSA can be built without RSA support.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Increasing the adv latency range to the minimum valid
ReceiveDelay value, 10ms. 4ms might be small for some
target systems.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Instead of selecting legacy MBEDTLS symbols, use corresponding
PSA_WANT ones when possible (note: some legacy symbols do not
have a PSA correspondance).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Now that support for all PSA_WANT symbols is in place, we can
enable MBEDTLS_USE_PSA_CRYPTO when MBEDTLS_PSA_CRYPTO_C is
enabled as well.
Note: this commit also moves USE_PSA_CRYPTO out of CRYPTO_C
dependency in config-tls-generic.h because TLS/DTLS/X509 modules
of MbedTLS can rely on *any* implementation of PSA crypto APIs
not only the MbedTLS one. TFM is for example an alternative
to this.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
MBEDTLS_PSA_CRYPTO_C and MBEDTLS_USE_PSA_CRYPTO are 2 different
things and the former should not automatically enable the
latter. The reson is that the user might want the MbedTLS
PSA crypto toolbox to be built, but at the same time he/she
does not want TLS/DTLS (and other intermediate modules such
as PK, MD and Cipher) to use PSA APIs.
For this reason this commit introduces a new Kconfig option
named CONFIG_MBEDTLS_USE_PSA_CRYPTO to enable the corresponding
build symbol. By default USE_PSA_CRYPTO is disabled. It is
only explicilty enabled in tests/samples that were previously
setting CRYPTO_C (since in those cases USE_PSA was set).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Commit adds analyzing of returned status of element rx.
If at least one element receives multicast message then
access layer will return suceess status.
If option CONFIG_BT_MESH_ACCESS_LAYER_MSG is enabled then
access layer will return success always.
Function bt_mesh_access_recv has been introduced to cover
case when real model statuses should be returned over
oppcode aggregator model despite access returns success.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
DFD Server, DFU Server, and DFU Client models are extended models
that extend other underlaying models. If BT_MESH_MODEL_EXTENSIONS
is not enabled, extension hierarchy is not initialized and this
results in issues in subscriptions and errors in representation
of hierarchy in CDP1. Since extensions are spec defined, force
selection of this option here to prevent users forgetting about it.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
CDP1 is mandatory to qualify a mesh device for mesh protocol v1.1.
The dependency on BT_MESH_MODEL_EXTENSIONS is removed because if a node
contains only base models (for example Generic OnOff Server), this API
will consume extra RAM bytes which won't be used.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Enable by default the access layer responses random delays.
Commit also adapts all mesh models, samples and
babblesim tests to use random delay functionality correctly.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The section 3.7.3.1 of the mesh specification recommends to delay
a message publication in certain cases:
- at power-up or upon state change for a time between 20 to 500 ms
- for periodic publications for a time between 20 to 50 ms
This change implements this recommendation by adding the
`CONFIG_BT_MESH_DELAYABLE_PUBLICATION` Kconfig option which enables
the randomization code and by adding the `bt_mesh_model_pub.delayable`
bit field which allows each model decide whether the publications
should be delayed for this model or not.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
