Enable commonly-used I2C in ADI MAX32 boards by default to access I2C
functionality without having to create an additional overlay file.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Some offloaded ifaces have an L2, but lack support for
net_l2->send. This edge case is not handled by
net_if_send_data, resulting in a NULL dereference under
rare circumstances.
This patch expands the offloaded iface guard in
net_if_send_data to handle this edge case.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
It looks like both cpuapp/cpunet cores share the same definitions for
LEDs, buttons and Arduino connector. This patch puts these repeated
definitions into a single shared file.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fixes issues with net_ptp_time arithmetic where second
overflow/underflow would not be handled properly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Offset should be *subtracted* from current clock value, not added.
This was causing clock to accumulate error instead of actually
"converging".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The test `storage.flash_map.mpu` for `nrf52840dk/nrf52840` fails
althought the output is correct. Time to test execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Inform users about Kconfig options deprecation and show what is the
alternative with some examples.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
nRF53X HV regulator differs from eg nRF52X as it offers a silent mode
option. For this reason, a new compatible is used, even if now such
capability is not exposed yet.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In addition to Kconfig options (soon to be deprecated), allow
configuring the regulators using DT.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The SoC main supply is part of the POWER IP block. The POWER IP is a
kind of multi-purpose block, so each of its functions is described as a
child node in DT, like similar other MFD. This allows to have specific
properties, e.g. for DC/DC mode.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some Nordic SoCs, like nRF52 contain an internal regulator for the main
SoC supply. Depending on the SoC, the regulator can have multiple
configurations (e.g. single/double stage), which mainly depends on
supporting "high-voltage" mode or not (VDDH pin supply). This patch adds
bindings for nRF5X regulator and nRF52X HV regulator.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When presenting an example of how to run a failing test case with
`west build`, provide the source dir path relative to the current
working directory, not the zephyr root directory.
Signed-off-by: Jordan Yates <jordan@embeint.com>
For 2.4GHz and 6GHz bands, while counting the channels in configured
range, start of the range is being counted twice. Correct this
by advancing the index by 1 while counting channels in range.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The WeAct STM32F405 Core Board is an extremely low cost and bare-bones
development board featuring the STM32F405RG, 64-pin variant of
the STM32F405x series.
Signed-off-by: Pavlo Yadvychuk <pyadvichuk@gmail.com>
Flexible arrays are arrays declared without a specific size, e.g:
uint8_t my_array[];
They are widely used as as last member in structs that are dynamically
allocated.
Since C99 they are part of the C standard, but for historical reasons
many places still use an older GNU extension that is declare zero
length arrays.
Although zero length arrays are flexible arrays, we can't blindly
replace [0] with [] because of some syntax limitations. This macro
workaround these limitations while get rid of this non standard
extension.
Using true flexible arrays allows the compiler to calculate the size
of the array better and improve potential issue checking.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
It is safer to base the SUIT artifacts path on the path of the
configuration file than the HEX file that is being flashed.
The latter may be overriden by several scripts that merge/transform the
final firmware image.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
lwm2m.h was missing the extern "C" block
and it used a forward declaration to an enum,
which is illegal in c++.
Signed-off-by: David van Rijn <david@refractor.dev>
Remove the logic from the board level about overriding the
flash load size and instead just select to use the DT code
partition if app is not expected to be able to occupy the
whole flash space because of the firmware image being
loaded separately.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The sx12xx driver does not provide RxError event handler therefore
when such error occurs, the driver does not handle it at all.
As a result, when the lora_recv function is called with infinite timeout,
it never returns as it waits on k_poll forever, with radio operation mode
set to STDBY_RC. Therefore, once the rx error occurs, radio is no longer
able to receive any subsequent incoming transmission. Fix it by adding
RxError event handler which releases modem usage and signals error
allowing lora_recv to return with a value indicating receive error.
Tested on lora e5 mini by transmitting multiple LoRa messages over a
short period of time that caused CRC error, thus RX errors.
Once the fix is applied, the descibed behaviour no longer occurs despite
the CRC errors caused by test.
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
[Description]
Device hang is observed when LE Scan
[Root Cause]
For le_ext_adv_report, Data[i] of one adv report is 0-229,
for the adv_buf of saving, it just is 73 bytes, so sometimes
the bytes of adv report is more than the adv_buf, resulted hang
[Fix]
consider the le ext adv case.
[Testing]
After modified, Device hang is not observed after stress
testing with LE Scan
Signed-off-by: Guotao Zhang <guotao.zhang@nxp.com>
Read CONFIG_SHELL_PROMPT_UART from config file and use them
in shell fixture in pytest-harness package.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Moved helper methods from tests/boot/with_mcumgr to pytest-harness
package. It can be reused by other tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
When periodic scanning reaches timeout and BIGinfo has not yet been
received, notify with BT_HCI_ERR_CONN_FAIL_TO_ESTAB for sync receiver.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When an ISO stream fails to sync to a broadcaster within the first 6
events, the establishment fails (as expected). However, it did not stop
the ticker, and subsequently it was impossible to establish a new sync
after this.
Make asynchronous call to ticker_stop when establishment fails, and exit
done handling. Cleanup is handled via ll_rx_dequeue().
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the ISO sync receiver has been disabled (terminted), ULL now calls
lll_sync_iso_flush in lower link layer, to allow cleanup and releasing
of resources.
Make sure ISO sync LLL flush is also called when terminating a stream
from local side (app). Add blocking mayfly call to lll_sync_iso_flush in
ll_big_sync_terminate.
Signed-off-by: Morten Priess <mtpr@oticon.com>
