Add sample to read from up to 10 FIFO streaming devices, using the
sensor_stream() API and the RTIO framework:
https://docs.zephyrproject.org/latest/services/rtio/index.html
The devices has to be aliased as streamN (0 <= N <= 9) in DT, and
will be instantiated using SENSOR_DT_STREAM_IODEV() macro.
Currently the sample gets/prints data on SENSOR_TRIG_FIFO_WATERMARK
trigger basis for the following sensor channels:
- SENSOR_CHAN_ACCEL_XYZ
- SENSOR_CHAN_GYRO_XYZ
- SENSOR_CHAN_DIE_TEMP
- SENSOR_CHAN_GAME_ROTATION_VECTOR
- SENSOR_CHAN_GRAVITY_VECTOR
- SENSOR_CHAN_GBIAS_XYZ
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Loop through all of the channels and make sure that each
channel has an output.
Changes in patch originally present in #72972.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Passing HTTP upgrade request context to the user callback allows the
user to decide whether to accept or reject the websocket connection
based on the HTTP headers in the request. The primary reason for this is
to enable authentication of the websocket connection (e.g. via cookies
or Authorization header).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
By default OpenThread uses storage API to store configuration options.
On for example mimxrt1020_evk the enabled by default is
CONFIG_SETTINGS_NONE when CONFIG_SETTINGS is enabled. Fix this problem by
using the CONFIG_SETTINGS_NVS=y.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add new test sample.sensor.thermometer_i3c, can't assign the same
platform with i2c, and i3c at the same time.
Support the shield on FRDM_MCXN236 board by I2C and I3C way.
Signed-off-by: Neil Chen <cheng.chen_1@nxp.com>
What is changed?
- Replaced printk with printf in the sample
Why do we need this change?
- Running the sample with fvp just prints the below output and not
the complete logs that we expect:
`sender 0: Sending inference`
We get the expected output with CONFIG_LOG_IMMEDIATE=y but,
its not ideal. printf works without the config and plus it
looks a better fit in the current sample than printk.
This change is validate using `mps3/corstone300/fvp`.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is changed?
- Updated the board qualifier for MPS3 to `mps3/corstone300/fvp`
Why do we need this change?
- To validate the sample with FVP by default since QEMU doesn't
model the NPU.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
The sample did not properly handle ending the broadcast and setting
it up for a new broadcast, due to missing wait for sem_big_term and
a bad check in iso_disconnected.
Furthermore if any did not work when setting up the BIG,
the error handling did not properly clean up for a retry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the LV_COLOR_SCREEN_TRANSP Kconfig option as its not part of the
modules Kconfig anymore and renames the functions according to the new v9.2
API.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adjust the Kconfig symbols of the capture to lvgl sample. LV_MEM_CUSTOM has
been removed in v9.0 and LV_USE_IMG has been changed to LV_USE_IMAGE.
Fix the changed fields for the image descriptor struct.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch changes the functions unsed in the subsys demo that are part of
the api map to anticipate their deprecation.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch changes the usage of LVGL functions which are typedefed in the
api map to their new version to anticipate their deprecation.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch fixes the style size setter usage in the accelerometer_chart
demo since it now expects two dimensions. Also the newly named functions
which are typedefed by the api_map in LVGL are updated to anticipate their
deprecation.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The network log backend had the POSIX_C_LANG_SUPPORT_R
dependency added in a previous commit, but the dependency was
never added to the sample.
Add the dpeendency of LOG_BACKEND_NET to the
samples/net/syslog_net/prj.conf
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add settings to get peak throughputs for nRF7002DK, this relies on the
overlay-wifi-nm-hostap.conf.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This sample works without increasing ZVFS_OPEN_MAX and ZVFS_POLL_MAX to
some arbitrary number. This also removes a duplicate entry for
ZVFS_OPEN_MAX.
ZVFS_OPEN_MAX already defaults to a reasonably large value of 16 if
POSIX_API is enabled, which is the case for the echo_service sample.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
These are never meant to be run, so make sure it's explicitly specified
through the build_only property.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add Silabs boards to the newly added test cases which exercise the
CONFIG_BUILD_ONLY_NO_BLOBS configuration option. Also fix the namespace to
be "peripheral" for the peripheral sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
For waking up the poll() use eventfd() instead of socketpair()
so we save some buffer space and one file descriptor.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The RP2350's PWM peripheral is largely unchanged from the RP2040's, but
the higher clock frequency means the long blink delay must be lower.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Add initial support for the RP2350's PIO peripherals, extend the
existing example under samples/boards/raspberrypi/rpi_pico/uart_pio to
demonstrate this on the Raspberry Pi Pico 2, and update the board's
documentation.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
The Raspberry Pi Pico 2's device is compatible with the existing Pico 1.
The build system requires a `<board>.overlay` file, but these use the
pre-processing to #include the sibling rpi_pico.overlay files rather
than duplicating the contents as an attempt to keep things DRY.
Tested locally.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Using bare-metal approach for retention configuration
is no longer compatible with sys_poweroff() implementation.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The LoRa driver does not allow to pass void* user_data to callback in
lora_recv_async function. This leads to complex way of using the API. This
commit fixes the issue and adds the field to the function and to the
callback.
Signed-off-by: Aleksander Dejewski <aleksander.dejewski@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
When using tickless mode, the socketpair()
seem to use heap by default on native_sim, so
add some space for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This description provides information about setting up RCP (nRF21540-DK)
and OT HOST (mimxrt1020_evk) to communicate with HOST PC's echo_server
via OpenThread Border Router (OTBR).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This overlay configures the imxrt1020 EVK board to use its lpuart2 serial
port to communicate with other board (in this case nRF21540-DK), which
is the RCP for OpenThread protocol.
The nRF Zephyr RCP is the one from Nordic (v2.7.0):
west build -p always -b nrf21540dk/nrf52840 -S logging
nrf/samples/openthread/coprocessor
The same UART (on nRF) can be used for testing/debugging purposes with
using the ot-cli's SPINEL communication program:
sudo ./build/posix/src/posix/ot-cli 'spinel+hdlc+uart:///dev/ttyACM1?u
art-baudrate=1000000' --verbose
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This config allows setting up the echo_client program with
RCP HOST UART (via SPINEL protocol) communication.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
