ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This sample enables and configures the MCO1/2 output
for stm32 target boards.
MCO_PRE_DIV_n is defined by the stm32XX_clock.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Gap filling in hex files are now disabled per default, and therefore
there is no reason to explicitly disable gap filling.
It has never been possible to disable gap filling in binary files.
Disabling gap filling would just result in the binary file to be gap
filled with the tool's default value, objcopy=0x00.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nrfx_gppi module is an abstraction over nrfx_ppi and nrfx_dppi
drivers. It now has a Kconfig option that is separate from nrfx_dppi and
by default it enables all PPI/DPPI instances, if available.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Gives an example where the timeout value is 15seconds,
the prescaler of 8 can let the LPTIM count from 0 to 16 seconds
with LSE
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The AT / STA wifi sample is generic so it does not need to be
located under espressif board directory. Following commit
will do additional changes to make the sample more generic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This sample executes some mathematical functions
that can be used for audio processing like
filtering (Fast Fourier Transform (FFT)) or
echo cancellation (Least Mean Square (LMS) filter algorithm).
This is an example that demonstrates how to include a proprietary
static library into the Zephyr build system.
The library is in an out of tree location.
To use this sample, with an out of tree library, one needs to define
an environment variable LIB_LOCATION.
If that is not defined, a default Zephyr API is used instead.
By default it uses CMSIS-DSP backend for math operations.
In README one can find more information.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Google boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BBC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There's no need to add conditions to CONFIG_PWM_NRF_SW, because it is
already conditioned to DT status. Right now, if any system uses both
normal PWM and "SW PWM", it needs to manually enable the driver
Kconfig.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This is a follow-up to commit 7a2ce2882a.
Do not enable clock control by default on nRF54H Series SoCs when
the system timer is present, because clock control is not needed
for this purpose there.
Add missing `default y` in the CLOCK_CONTROL_NRF2 Kconfig option that
enables compilation of clock control drivers for nRF54H Series.
This way modules that actually require clock control (like drivers
that use radio) will be able to enable it using the generic option
(CLOCK_CONTROL), not the above one that is specific for nRF54H.
Update accordingly applications that referenced the CLOCK_CONTROL_NRF2
option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add flpr and ppr core to the sample.
Since there are only 2 UARTs available on DK, local UART configuration
is using only cpuapp and cpurad.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add interrupt locking during test to ensure that main thread is not
interrupts which would impact the test.
Add longer sleep time between tests to ensure that all logs are
processed on time and not dropped.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adopt zephyr:code-sample directive to describe the Dining
Philosophers sample and update reference accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add stm32f746g_disco board to MCO sample.
This board has 2 MCO instances so useful to show multiple instances
as well as checking the implementation.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Board samples were listed in a very flat way before.
This commit introduces the appropriate toctrees to fix this.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the TI samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Enjoydigital board samples in samples/boards/enjoydigital to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Nuvoton board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Raspberry Pi board samples in samples/boards/raspberrypi to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Google board samples in samples/boards/google to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to twinkie sample
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Phytec board samples in samples/boards/phytec to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to mesh badge
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Intel board samples in samples/boards/intel to
keep samples/boards/ organized by vendor
Added missing code-sample directive to the code relocation sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Quicklogic board samples in samples/boards/quicklogic to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all STM32 board samples in samples/boards/st to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the STM32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
