Change pins that are used for qdec nrf54h20dk to align with shield
(loopbacks) used in internal CI. This change is needed to start
qdec driver power management testing.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
Adds adxl362 streaming and trigger configurations to accelerometer
samples for profiling the performance impact of adding rtio support to
max32 spi and adxl362 accelerometer drivers.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
This updates the documentation of all the WeAct boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Rasperry Pi boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the WaveShare boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Nuvoton boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ezurio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BBC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Adafruit boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Actinius boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Die temperature polling sample is not enabled for frdm_mcxc242 board.
Add devicetree overlay and Kconfig configuration for the sample to
enable it.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
TI tmp1075 driver implemented based on tmp108 driver.
The driver initializes the sensor based on the DTS.
Added tmp1075 example overlay file to thermometer sample.
All you need to do to use the sensor is to connect the I2C and
optionally interrupt line.
To see default DTS configuration option inspect `ti,tmp1075.yaml`
bindings file and sensor spec.
Signed-off-by: Paweł Czaplewski <pawel.czaplewski@arrow.com>
The mcux_acmp will get support by the comparator subsystem. To avoid
namespace clashes, namespace the driver, kconfigs and use the
MCUX_ACMP config solely to select the MCUX SDK driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Upgrade to accel_polling sample application to support
RTIO streaming functionality. This mode is enabled when
CONFIG_SENSOR_ASYNC_API is defined. NUM_SENSORS must be
set to the correct number of sensors used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added mimxrt1040_evk to inregration platforms, so that fxls8974 is tested,
and added config for mimxrt1040_evk to sensor_shell
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add acmp pinctrl configuration to support ACMP driver for NXP frdm_ke17z
and frdm_ke17z512, tested 'sample.sensor.mcux_acmp' case.
Update the index.rst to add acmp description for ke17z.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
The accel_polling sample uses various sensor, but doesn't set a sampling
rate. But some sensors (like st,lsm6dso) have a default sampling
frequency of 0. So, depending on the sensor, the sample may not always
work.
There are two ways to fix this: either all drivers must set a valid
sampling rate, or the sample shall at least try to set a value if there
is none.
We propose here the second approach, wich should allow the sample to
work on more sensors out of the box.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Docs now start at a high level, discussing sensors, attributes,
channels, and reading data from them.
Followed by more detailed usage guides in how to solve common problems
sensor users may run into.
Additionally renames the sensor_api sphinx tag to sensor
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Recent PR turned on test case for twister which revieled a bug
with building the test case for RT1050 EVK. The touch_controller
DTS node was removed a by commit 57ad325e and further deprecated
by bde07beb5 when the platform was converted to tread displays as
shields.
Signed-off-by: David Leach <david.leach@nxp.com>
At least for nrf boards, the emulation timer settings generate
reading around -60 degrees. Verify that value with some threshold.
Delay the first reading to prevent 0 at the beginning.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
The test `sample.sensor.shell.pytest` fails althought the output
is correct. Time to execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
The #73619 which fixes the atmel,sam-tc-qdec sensor implementation
introduced agregression on the sample test removing the harness
console. That changed the test to use the default ztest behaviour
which is incompatible with the test outpout. This restore the
harness to the default console value.
Fixes: #74531
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current atmel,sam-tc-qdec sensor implementation shared the timer
counter node. This create issues when users wants define both modes.
The current proposal changes the qdec dedinition to be a child of
tc and refactor all the chain of definitions.
Fixes#71312
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a fixture to run the sample only when the DHT sensor
HX330x is present (shield) on the nucleo_f40re board
'fixture_i2c_hs300x'
The stm32f401 Nucleo board itself has no sensor mounted
Signed-off-by: Francois Ramu <francois.ramu@st.com>
