The smp library implements de/serialization of SMP messages.
The smpclient library implements the serial, BLE, and UDP
transport layers for Windows, Linux, and macOS.
Signed-off-by: JP Hutchins <jp@intercreate.io>
Ensure Jinja templates don't have extra blank lines in the output by
using the {% -%} syntax to suppress them.
This is not incredibly important but this helps keeps the HTML output
more readable.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add proper labels to the form fields for better UX/accessibility
Updated the placeholder for the "board name" field to be more
informative.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Reduce the valid scaling range for the gain multipliers and dividers to
provide more headroom on int64_t overflows in the calculations. Take
advantage of this headroom to perform all multiplications before
divisions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Change the unit of the sense resistor in the devicetree binding from
micro-ohms to milli-ohms. This is done for three reasons.
Firstly, the maximum value resistor that can currently be represented
is 4.2 kOhms, due to the limitation of devicetree properties to 32 bits.
Secondly, storing the resistance at such a high resolution makes
overflows much more likely when the desired output unit is micro-amps,
not milli-amps.
Finally, micro-ohms, are an unnecessarily precise unit for the purpose
of these calculations, and a resolution that is not realistic to
achieve. The high resistor resolution results in large divisors that
reduce the resolution of outputs. Unlike resistors characterised down to
the micro-ohm, devices wanting to measure micro-amps are actually
realistic.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update to latest Sphinx RTD Theme version.
Main benefit will be to be able to leverage Sphinx 8.0 since previous
version of the theme was depending on 'sphinx < 8.0'.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the POSIX_DEVICE_IO Option Group as commplete. This Option
Group is required for PSE51, PSE52, PSE53, PSE54, and most of
the interesting applications involving file descriptors and
sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add `west bindesc get_offset` command to print the offset of
the descriptors inside the given image.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Prior to this fix the descriptors end tag was placed in the binary
using LONG. This was wrong because the tag is of type short, and
the size of the descriptor (0), should have also been placed.
It so happened that on little endian machines the incorrect linker
script yielded correct results, as the extra zeros added to make
the value a long ended up as the correct byte sequence
(FF FF 00 00). On big endian machines however, the wrong sequence
is generated (00 00 FF FF).
This patch correct this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Change adds a release note informing about the newly introduced Kconfig
option for Bluetooth stack.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Apply selection from the hash URL *after* having sorted the vendors
alphabetically.
Remove the initial call to updateBoardCount() as it is useless to
have one this early.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix a regression introduced at the last minute when cleaning up
the stylesheet. The rule as it was made no sense.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add entyr mentioning the deprecation of the nxp, prefixed properties
in the nxp,kinetis-acmp dts binding.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Clarify that the actual calls to these backend functions are made
from `settings_save_subtree()`, which is called by `settings_save()`
or can be used directly.
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@astrolightspace.com>
The timeout state is local and can block new ATT operations, but does
not affect the remote side. Disconnecting the GATT connection upon ATT
timeout simplifies error handling for developers. This reduces rare
failure conditions to a common one, without needing special cases for
ATT timeouts.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds support for generating an interactive catalog of all
the supported boards that can be included in the documentation using
the `.. zephyr:board-catalog::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If the `divider-int-0` or variations of these for each channel properties
are not specified, or if these is 0,
the driver dynamically configures the division ratio by specified cycles.
The driver will operate at the specified division ratio if a non-zero
value is specified for `divider-int-0`.
This is unchanged from previous behavior.
Please specify ``divider-int-0`` explicitly to make the same behavior as
before.
In addition, the default device tree properties related to the division
ratio have been removed.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This adds zephyr,touch property to boards with touch controllers, analogous
to `zephyr,display`.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Modify the BAP unicast client callback structure to be a
linked list. The purpose of this is to have multiple listeners
of the unicast client changes and notifications.
This is needed for the CAP initiatior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update JWT subsystem documentation concerning the changes related
to:
- default library used
- new Kconfigs added
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adds a signing page under build, which contains information on
how to sign images from the build system, this removes the old
details for using west sign with imgtool from the west sign page
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Update the migration guide to indicate that the STM32 ADC that selects an
asynchronous clock also need to set a domain clock.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
It includes both the high-level documentation of the subsystem and
that of APIs defined in code (PSA Secure Storage and internal APIs of
the subsystem).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing entry to the documentation to also support CMake linker
generator with CoAP services.
Update hard coded value with linker script defined value.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
