JLink refuses new RTT telnet connections for a few moments after a socket
closes. This causes an issue when using `nc` as the telnet viewer, since
JLink would deny the connection. To resolve this, keep the "ping" socket
we use to determine if the RTT viewer is active connected, and use that
socket for RTT communication.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
Since "JLink.exe" is also an executable distributed with JDK's, do an
explicit search on the standard SEGGER install directories for a JTAG
"JLink.exe" before falling back to whatever is first on PATH.
Fixes#51825.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The cleanup pass (336c7da) to address long lines accidentally
removed a needed comma in the jlink runner.
Fixes#83605
Signed-off-by: David Leach <david.leach@nxp.com>
Commit e2a32d8b0ca596afeae48739c43817f693720a88 introduced an unbound
cmd issue for jlink flashing.
Fixed by moving cmd assignment outside of condition.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Similar to how print_gdbserver_message() prints GDB server info
when "west debug" is run, print RTT server info when "west rtt"
is run.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Commit f987e8c6f0a49b04a1184b1a36612612482e3d24 introduced a regression
where the is_ip check fails if no --id is passed as an argument.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If multiple J-Links with IP support are used,
they can be selected with different ports.
The actual implementation is just using the default port.
Make the port selectable with <ip>:<port>.
Signed-off-by: Michael Arnold <marnold@baumer.com>
The commit 221199e15b presents a bug that
makes west flash failed with error.
AttributeError: 'NoneType' object has no attribute 'startswith'
In function is_tunnel(), tunnel may contain None and has no attribute
"startswith". Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This adds support for J-Link tunnels, which run on top of an IP network
and therefore uses the -IP option. J-Link tunnels are identified by a
tunnel: prefix instead of a bare IP address. This change checks for the
presence of such a prefix, and choses the -IP transport option if the
tunnel prefix is found.
This has been tested with J-Link Remote Server v7.98g and the SEGGER
tunnel option.
Signed-off-by: Adam Dunkels <adam@dunkels.com>
Moves the telnet client into runners/core.py as well, as this is now shared
between openocd and jlink.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
The .bin & .hex build output is optional and can be disabled by
CONFIG_BUILD_OUTPUT_BIN/HEX.
Add support for the mandatory .elf build output
to the jlink runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add support for J-Link over IP and J-Link remote server.
If the "--dev-id" is a valid ip, the transport over ip is selected.
Otherwise usb is selected.
Signed-off-by: Michael Arnold <marnold@baumer.com>
Some of the runners in the tree have been adding their own,
class-specific versions of a switch to instruct the runner to reset or
not the device after flashing.
In order to better support multi-image builds that require more than one
flash operation, introduce a new --reset,--no-reset command-line
parameter that is part of the RunnerCaps so taht this functionality can
be accessed in a standardized manner.
Implementations for the new parameter are provided for the runner
classes that were already configurable in this regard.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This is a partial revert of commit
2cee5ff519
("scripts: west_commands: runners: remove deprecated options").
I remarked at the time that the removal of the older way of writing
things from the runners themselves seemed gratuitous since they are
easy to continue to support indefinitely and people may have been used
to the old way of doing things. It didn't seem worth the fight to push
for a revert at the time, though.
Since then I've run into real problems that their removal has caused
in the wild and I am convinced that this part of that patch was wrong.
Restore the original, undeprecated forms of these options, but make it
clear in the command line help that they're just obsolete alternative
spellings at this point.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The --snr (nrfjprog) --id (jlink) and --board-id (pyocd) options were
deprecated a long time ago in favor of --dev-id. It is time to remove
them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With revision 7.70d, Segger changed the command line interface of the
jlink client, requiring some flash specific information, such as
the base address and the type of memory, e.g. QSPI.
This commit adds an optional argument to the West jlink runner,
'--loader' which passes the information to the jlink client.
This change is backward compatible with versions of jlink older
than v7.70d which introduces the CLI change.
Fixes: #50327
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
It looks like the latest release, 0.14.2, changed the contents of
JLINK_SDK_NAME as it was before 0.14.0 release. That means that the
previous fix is only applicable to a couple of releases: 0.14.0/0.14.1.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
pylink 0.14.0 changed the class variable where JLink DLL library name
(libjlinkarm) is stored. This patch adds support for new pylink
libraries while keeping backwards compatibility.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The --tool-opt runner option is the recommended practice for allowing
runners to take additional arguments that are passed on to the
underlying tool. It exists because we don't want to add one runner
option for every single tool option that users might want to tweak --
that would be a nightmare.
Enough runners are using this option that it's time to promote it to a
common runner capability with consistent behavior, the same way we did
for the --dev-id option in the past. This removes boilerplate from
individual runner files and ensures consistent argument handling for
this option when it is supported.
Since --tool-opt is a bit long to type, and we've had some complaints
about that, take this as an opportunity to standardize on -O as a
short option equivalent for it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add "ExitOnError 1" argument that treats any command-error
as fatal thus in the case of a programming error the "west flash"
command will return the correct error code instead of the default 0. It
fixes the false positive return codes when e.g we call west flash
command without a connected programmer or with the disconnected board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
In order to allow for further options to be deprecated with minimal
impact, add a deprecation argparse Action and a callable instantiator
that can be used to deprecate options in favor of new ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle serial numbers provided from the command-line instead of forcing
the user to provide 'tool-opt' manually.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Support this when debugging also.
Tweak the style for brevity also while we're here by propertizing the
supports_nogui method, etc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Set options that are definitely true or false to True or False in the
options dict. Add a 'getboolean' method that also allows a fallback to
False in case the option is not mentioned in .config due to unmet
dependencies. This allows calling code to just ask about the option
they are interested in, even if the .config file doesn't mention the
option at all.
Propagate this to users within the runners package and 'west sign',
taking advantage of the new build_conf property.
Rename the 'bcfg' internal variable in sign.py to 'build_conf' to
match other source files that use BuildConfiguration instances, to
make it easier to grep for users.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is really verbose, and I doubt anyone cares unless there is a
problem. Keep it around when run as 'west -v flash' to allow for
debugging, though.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Defer loading .config until we really need it, when we are flashing a
binary. Pre-emptively loading it is wasted effort if we're flashing a
.hex, which has been the default behavior when possible since
dcaabb860f ("west: runners: jlink: prefer .hex over .bin").
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Put it all in one log message rather than splitting it up.
This makes it look cleaner now that each log message is prefixed with
'runners.link:'.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
JLink versions like 'V7.0a' do not conform to PEP 440 version
conventions; the 'a' part is used by PEP 440 compliant versions for
alphas. It gets parsed to a legacy type by the packaging library,
which always is treated as a lower value when compared with a
conforming version string.
To fix, get the version from the shared library distributed with the
JLink tools. This has the side benefit of making the code work on
Windows. That's merely a nice to have for -nogui 1 detection for now,
but will be essential in the next commit.
Reported-by: Jake Mercer <jake.mercer@civica.co.uk>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The jlink runner performs a version check which is skipped on
Windows. If running inside WSL we also need to skip.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow a custom (remote) gdb host passed as a debug argument
which tries to connect to an existing one instead of creating one.
This also allows to run the gdb server outside of a WSL
in Windows and the debugger inside of the WSL environment.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update the jlink runner to prefer flashing .hex files instead of .bin.
This can increase programming speed in cases where there are large
amounts of padding in an application.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The RunnerConfig class stores the locations of the Zephyr output files
in various formats (elf, hex, bin). A longstanding issue with the
representation is that these might not exist if the corresponding
Kconfig options are not set. For example, if
CONFIG_BUILD_OUTPUT_BIN=n, there is no .bin file.
Change this so the type system knows these are Optional[str], not str.
Fix the runners that use non-ELF outputs so they check for the
existence of the relevant file before using it, mostly using a new
ZephyrBinaryRunner.ensure_output helper.
I'm not going to bother with checking for the ELF file itself; that's
always there as far as I can tell.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add support for the J-Link Commander "-NoGui 1" command line parameter
in the West J-Link runner.
This command line parameter suppresses GUI dialogs (except for license
dialogs) in J-Link Commander starting from v6.80.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the --erase option to core.py from nrfjprog.py and jlink.py,
where it is currently supported.
Using the RunnerCaps option enforcement mechanism introduced earlier,
enforce that it will only be given to runners that support it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require all implementations to provide a do_create(), a new
ZephyrBinaryRunner abstract class method, and make create() itself
concrete.
This allows us to enforce common conventions related to individual
runner capabilities as each runner provides to the core via
RunnerCaps.
For now, just enforce that:
- common options related to capabilities are always added, so runners
can't reuse them for different ends
- common options provided for runners which don't support them emit
sensible error messages that should be easy to diagnose and support
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can just call super() instead of super(MyClassName, self). The
original extra verbosity is likely due to old habits of mine from
Python 2 which are no longer necessary, but got copy/pasted around.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
