Allow user to specify protocol extensions when receiving data
from Ethernet network. This means that user can register L3
protocol handler using NET_L3_REGISTER() with the desired
protocol type. Ethernet code will then call the handler if
such a protocol type packet is received. This is currently
only implemented for Ethernet. The original IPv4 and IPv6
handling is left intact even if they can be considered to
be L3 layer protocol. This could be changed in the future
if needed so that IPv4 and IPv6 handling could be made
pluggable protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
With assert condition set to true, assertion never happens.
Change __ASSERT(true) to __ASSERT(false).
Signed-off-by: Dmitry Lukyantsev <dmitrylu@meta.com>
Align DDPI usage with nRF54L series power domains and
available DDPI configurations.
Use indices below 4 when needing to bridge with GPIO,
use indices below 8 when needing to bridge with MCU domain
like CCM and AAR; and use indices above 7 to bridge with
Peripheral domain.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace use of HAL_RADIO_RECV_TIMEOUT_CANCEL_PPI with
HAL_TRIGGER_CRYPT_PPI; they have same value but use the
correctly named HAL_TRIGGER_CRYPT_PPI define now.
Fix conditional compile to correctly exclude reference of
NRF_CCM when CONFIG_BT_CTLR_PRIVACY=n.
Fix missing reference to CCM_TASKS_CRYPT_DELAY_BITS when
CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER=y.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ISO Peripheral for single timer use support required
for nRF54L Series SoCs.
As the timer is reset on every radio end, use the
radio_tmr_hcto_configure_abs() function to set the header
complete timeout correctly when using single timer for s/w
switching.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ISO Central for single timer use support required
for nRF54L Series SoCs.
As the timer is reset on every radio end, use the
radio_tmr_hcto_configure_abs() function to set the header
complete timeout correctly when using single timer for s/w
switching.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ISO Sync Receiver for single timer use support
required for nRF54L Series SoCs.
As the timer is reset on every radio end, use the
radio_tmr_hcto_configure_abs() function to set the header
complete timeout correctly when using single timer for s/w
switching.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Periodic Advertising Sync implementation for single
timer use support required for nRF54L Series SoCs.
As the timer is reset on every radio end, use the
radio_tmr_hcto_configure_abs() function to set the header
complete timeout correctly when using single timer for s/w
switching.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update advanced non-overlapping Central Connection Creation
scheduling for single timer use support required for nRF54L
Series SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Extended Scanning for single timer use support
required for nRF54L Series SoCs.
As the timer is reset on every radio end, use the
radio_tmr_hcto_configure_abs() function to set the header
complete timeout correctly when using single timer for s/w
switching.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Extended Advertising for single timer use support
required for nRF54L Series SoCs.
As the timer is reset on every radio end, add implementation
to accumulate the last_pdu_end_us.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This reverts commit a7fff7445c.
The next commit will re-add back the fix to primary
advertising channel plus auxiliary advertising channel too.
This will help keep the fix together regarding use of
single timer for software tIFS switching implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict the jitter considered in the PDU reception in the
subevents of ISO Sync Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix nRF5 radio and event timer abstractions for some that
where hard coded compared to use of the ones defined in the
resources header file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add radio_sim_nrf54l.h file, which for now a copy of the
SoC radio_nrf54lx.h file. This is added for having separate
simulation model dependent timing values and specific
implementation details.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix single timer s/w switch when using DPPI on nRF53/54L
where the previous compare register index is incorrect when
the base index is a odd numbered DPPI used.
The issue is discovered as failing ISO Receiver sample with
Coded PHY and single timer use, where the compare base is
configured to use the DPPI 3 (instead of 4).
Upstream samples do not use single timer for s/w switch, the
issue is discovered when adding support for nRF54L which has
to use single timer due to the radio only having a single
timer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit addresses two bugs in use of single timer s/w
switch implementation, incorrect aux_offset in subsequent
ADV_EXT_IND and ISO receiver failing to receive second or
greater BIS subevents.
Fix radio_tmr_start_now implementation to consider the
initial latency in starting the event timer in single timer
use mode. This fixes the incorrect aux_offset in ADV_EXT_IND
PDUs.
Fix radio_tmr_start_us implementation for single timer use,
as the timer is reset on every radio end, and hence the
requested start_us has to be adjusted for the accumulated
last_end_pdu_us value. This fixes the BIS subevent
receptions.
Also, fix the maximum radio ISR latency value used in
radio_tmr_start_us to consider the maximum Rx chain delay
and maximum radio ramp up delays. 80 us + ~30 us + ~40 us
should be able to meet the 150 us tIFS duration.
Relates to commit bcd28e0a86 ("Bluetooth: Controller: Fix
sw switch single timer for spurious TXEN/RXEN").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replaced the k_pipe-based implementation in sockpair with ring_buffer
based implementation instead.
The move to ring_buffer is done to avoid overhead of k_pipe and to align
with the new k_pipe API.
This does not pose any added risk to concurrency as the read and write
functions are protected by semaphores for both spairs.
Signed-off-by: Måns Ansgariusson <Mansgariusson@gmail.com>
In current implementation, the `accept` cannot be identified if the
same one `accept` callback is passed by the upper layer.
Similar with `accept` of `bt_l2cap_server.accept`, add a parameter
`server` to the `bt_rfcomm_server.accept` callback.
Add a argument `server` to function bt_hfp_hf_accept() to avoid
building issue for HFP_HF.
Add a argument `server` to function rfcomm_accept() to avoid building
issue for shell/rfcomm.c.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
In the function `bt_rfcomm_server_register()`, the channel cannot be
dynamic allocated. And only pre-set channel is supported.
Improve the function `bt_rfcomm_server_register()` to support the
dynamic channel allocation if the passed channel is zero.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The buffer `BT_RFCOMM_BUF_SIZE` is used to define the TX buffer size of
TX pool.
In current implementation, the TX buffer size of RFCOMM cannot be
calculated due to the macro `BT_RFCOMM_BUF_SIZE` is defined in internal
header file `rfcomm_internal.h`.
Move the macro `BT_RFCOMM_BUF_SIZE` form internal header file
`rfcomm_internal.h` to interface `rfcomm.h`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Log_level command is a duplicate of 'log enable' command from
the logging command set (enabled by CONFIG_LOG_CMDS=y). Adding
warning about deprecation as 'log enable' is recommended since
it has more features (e.g. autocompletion).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
BASE is now parsed on-the-fly on sink sync, removing
unnecessary restriction in intermediate parsed storage
and without requiring an excessive amount of memory.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
add flash_img_get_upload_slot() to get current
upload slot.
when CONFIG_MCUBOOT_BOOTLOADER_MODE_RAM_LOAD
is enabled, it is not based on the DT.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Content-Range functionality added in recent commits has been propagated
to http_client module. If "Content-Range" string is detected on header
field, Content-Range are returned via http_response structure.
Signed-off-by: Piotr Radecki <piotr.radecki@jrdltd.co.uk>
Content-Range hasn't been supported in zephyr. This change adds
Content-Range header parsing to http_parser module. Range start,
range end, and total size are supported. All units are currently
interpreted as bytes.
This is much needed change, because many applications responsible
for http data download are based on Content-Range approach.
Signed-off-by: Piotr Radecki <piotr.radecki@jrdltd.co.uk>
As the connection was removed from the list, we now own its reference.
Keep this reference and return it to the TX processor.
Signed-off-by: Ahmed Ahmed <ahmed.ahmed@dewinelabs.com>
Assert that the previous connection in the list and the tmp element
in the loop are different to the current connection.
Otherwise, if the same connection was somehow added twice it
could result in an infinite loop.
Signed-off-by: Ahmed Ahmed <ahmed.ahmed@dewinelabs.com>
Iterate over the list of connections to find a connection
that is able to send data, instead of returning NULL if
the first connection can't send data.
This solves the problem with starvation of other connections.
Signed-off-by: Ahmed Ahmed <ahmed.ahmed@dewinelabs.com>
Use a config, instead of hardcode, to set timeout value.
It says how much time UART backend should wait for entire message sent
in chunks.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Instead of setting the upper protocol type in ethernet_send()
by checking the protocol type bits, use the ptype that is already
set by the caller. This allows new protocol types to be supported
and makes the system extensible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Template string for HTTP 1.0 500 response expects content length as a %d
but was getting passed a 'long unsigned int' instead of an 'int'.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In case of errors during HTTP2 request processing (or after the HTTP1
upgrade response was sent), send 500 Internal Server Error response
before shutting down the connection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since there is a helper function to generate/send headers frame, the
flag can be set there instead of being set separately in various places.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case of internal server errors during HTTP1 request processing,
send 500 Internal Server Error response before shutting down the
connection.
Make sure http1_headers_sent is set whenever sever starts replying, to
avoid duplicate response in case of errors, as that would be protocol
violation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reply with 405 Method not allowed not only for static FS resource types,
but also for others. Also, the method checking for for static resources
was messed up - those resource types only support GET by design, so no
need to compare resource method bitmask - it should be checked that the
request was actually GET instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
fix coverity issue about deadcode, there is no code path which would
lead to the code that is being deleted with this commit
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
