Moves the arch_swap() declaration out of kernel_arch_interface.h
and into the various architectures' kernel_arch_func.h. This
permits the arch_swap() to be inlined on ARM, but extern'd on
the other architectures that still implement arch_swap().
Inlining this function on ARM has shown at least a +5% performance
boost according to the thread_metric benchmark on the disco_l475_iot1
board.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
This adds a interface to allow coredump to dump privileged
stack which is defined in architecture specific way.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new arch_thread_priv_stack_space_get() interface for
each architecture to report privileged stack space usage. Each
architecture will need to implement this function as each arch
has their own way of defining privileged stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The intention of this API is to allow setting the posix thread
name equal to the zephyr thread name.
By defining it as an arch interface, the implementation becomes
generic.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Also any demand paging and page frame related bits are
renamed.
This is part of a series to move memory management related
stuff out of the Z_ namespace into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of a series to move memory management related
stuff from Z_ namespace into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add a closing comment to the endif with the configuration
information to which the endif belongs too.
To make the code more clearer if the configs need adaptions.
Signed-off-by: Simon Hein <Shein@baumer.com>
arch_interface.h is for architecture and should not be
under sys/. So move it under include/zephyr/arch/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The function _Cstart has already been renamed to z_cstart,
so change the remaining references of it in various docs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The wording on deprecating arch_kernel_init() in favor of prep_c()
has never been materialized. Various architectures are using it to
perform initialization. So remove the wording.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is no need to use conditional compilation for the function
prototypes in the kernel architecture header file. So remove it.
Added bouns is that these functions can appear in documentation
without explicitly enabled in pre-defines during doc build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some architectures already returns -ENOTSUP when these functions
are called. So add this return value to the API doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new function prototype for arch_page_phys_get()
which will be used to translate mapped virtual addresses back
to physical memory addresses. This is needed for the future
k_mem_unmap() function which requires this to find
the corresponding page frame. It is faster to look through
the page tables instead of doing linear search of the page
frame array.
A weak function is provided in case arch_page_phys_get()
is not implemented at the arch level. This simply goes
through all the page frame and find the one which has
mapped to the virtual address.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Some recent changes exposed some common "arch_switch() anti-patterns"
in various architectures. The documentation technically described
this all correctly, but probably wasn't as clear as it should have
been. Rewrite, making clear exactly what needs to happen and how the
fields should be interpreted.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Architecture layer hooks for demand paging. See
doxygen for these API definitions for more details.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Pre-allocation of paging structures is now required, such that
no allocations are ever needed when mapping memory.
Instantiation of new memory domains may still require allocations
unless a common page table is used.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Architecture layer hooks for demand paging. See
doxygen for these API definitions for more details.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Pre-allocation of paging structures is now required, such that
no allocations are ever needed when mapping memory.
Instantiation of new memory domains may still require allocations
unless a common page table is used.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renamed to make its semantics clearer; this function maps
*physical* memory addresses and is not equivalent to
posix mmap(), which might confuse people.
mem_map test case remains the same name as other memory
mapping scenarios will be added in the fullness of time.
Parameter names to z_phys_map adjusted slightly to be more
consistent with names used in other memory mapping functions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds the common struct fields and functions to support
the implementation of thread local storage in individual
architecture. This uses the thread stack to store TLS data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The core kernel does not use this yet, but it will be later used
as part of infrastructure for memory-mapping stacks, as detailed
in #28899.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory mapping, for now, will be a private kernel API
and is not intended to be application-facing at this time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This now takes a stack pointer as an argument with TLS
and random offsets accounted for properly.
Based on #24467 authored by Flavio Ceolin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch_new_thread() passes along the thread priority and option
flags, but these are already initialized in thread->base and
can be accessed there if needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
These arch_timing_ defines get used in certain timer
drivers and need to be in the public include space,
and not the private kernel headers.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The original intent was that the output handle be written through the
pointer in the second argument, though not all architectures used that
scheme. As it turns out, that write is becoming a synchronization
signal, so it's no longer optional.
Clarify the documentation in arch_switch() about this requirement, and
add an instruction to the x86_64 context switch to implement it as
original envisioned.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Builds of docs with doxygen 1.8.16 has a number of warnings of the form:
'warning: unbalanced grouping commands'. Fix those warnings be either
balancing the group command or removing it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
