zephyr/dts/bindings/tcpc/richtek,rt1715.yaml
Jianxiong Gu 391008b097 drivers: tcpc: Add TCPC driver for RT1715
Add support for RT1715.

Signed-off-by: Jianxiong Gu <jianxiong.gu@outlook.com>
2025-01-15 19:03:27 +01:00

74 lines
2 KiB
YAML

# Copyright (c) 2024 Jianxiong Gu <jianxiong.gu@outlook.com>
# SPDX-License-Identifier: Apache-2.0
description: |
The Richtek RT1715 is a Type-C Port Controller (TCPC) chip.
Example:
ports {
#address-cells = <1>;
#size-cells = <0>;
port0: usbc-port@0 {
compatible = "usb-c-connector";
reg = <0>;
tcpc = <&rt1715_tcpc0>;
vbus = <&vbus0>;
power-role = "sink";
sink-pdos = <PDO_FIXED(5000, 100, 0)>;
};
};
vbus0: vbus {
compatible = "zephyr,usb-c-vbus-adc";
status = "okay";
io-channels = <&adc 2>;
output-ohms = <10000>;
full-ohms = <(100000 + 10000)>;
};
i2c1 {
status = "okay";
clock-frequency = <I2C_BITRATE_FAST_PLUS>;
rt1715_tcpc0: rt1715@4e {
compatible = "richtek,rt1715";
reg = <0x4e>;
irq-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
compatible: "richtek,rt1715"
include: [base.yaml, pinctrl-device.yaml]
properties:
reg:
required: true
irq-gpios:
type: phandle-array
required: true
description: |
Interrupt GPIO pin connected from the chip.
transmit-retries:
type: int
default: 2
description: |
Maximum number of packet retransmissions done by TCPC. Valid values are <0, 3>.
This value is used to fill the Retry Counter part of the TCPCI Transmit register.
vconn-ctrl-gpios:
type: phandle-array
description: |
GPIO pin for VCONN control. RT1715 does not have built-in VCONN power supply. If the
state of the VCONN power supply need to be toggled, this pin and a switchable power
supply are required.
vconn-disc-gpios:
type: phandle-array
description: |
GPIO pin for VCONN discharge control. RT1715 does not have VCONN discharge capability.
If VCONN discharge is not needed, this pin does not need to be defined in the device
tree. Otherwise, this pin and a discharge path are required.