zephyr/boards/renesas/ek_ra8d1/ek_ra8d1.dts

/*
 * Copyright (c) 2024 Renesas Electronics Corporation
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <renesas/ra/ra8/r7fa8d1bhecbd.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input-event-codes.h>
#include <zephyr/dt-bindings/adc/adc.h>
#include "ek_ra8d1-pinctrl.dtsi"

/ {
	model = "Renesas EK-RA8D1";
	compatible = "renesas,ra8d1", "renesas,ra8";

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,console = &uart9;
		zephyr,shell-uart = &uart9;
		zephyr,entropy = &trng;
		zephyr,flash-controller = &flash1;
		zephyr,canbus = &canfd0;
	};

	leds {
		compatible = "gpio-leds";
		led1: led1 {
			gpios = <&ioport6 0 GPIO_ACTIVE_HIGH>;
			label = "LED1";
		};
		led2: led2 {
			gpios = <&ioport4 14 GPIO_ACTIVE_HIGH>;
			label = "LED2";
		};
		led3: led3 {
			gpios = <&ioport1 7 GPIO_ACTIVE_HIGH>;
			label = "LED3";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: s1 {
			gpios = <&ioport0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 1";
			zephyr,code = <INPUT_KEY_0>;
		};
		button1: s2 {
			gpios = <&ioport0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 2";
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	aliases {
		led0 = &led1;
		sw0 = &button0;
		sw1 = &button1;
	};
};

&xtal {
	clock-frequency = <DT_FREQ_M(20)>;
	mosel = <0>;
	#clock-cells = <0>;
	status = "okay";
};

&subclk {
	status = "okay";
};

&pll {
	status = "okay";
	pllp {
		status = "okay";
	};

	pllq {
		status = "okay";
	};

	pllr {
		status = "okay";
	};
};


&sciclk {
	clocks = <&pllp>;
	div = <4>;
	status = "okay";
};

&canfdclk {
	clocks = <&pll>;
	div = <5>;
	status = "okay";
};

&ioport0 {
	status = "okay";
};

&ioport1 {
	status = "okay";
};

&ioport4 {
	status = "okay";
};

&ioport6 {
	status = "okay";
};

&sci0 {
	/* sci0 and spi0 cannot be enabled together */
	pinctrl-0 = <&sci9_default>;
	pinctrl-names = "default";
};

&sci9 {
	pinctrl-0 = <&sci9_default>;
	pinctrl-names = "default";
	status = "okay";
	uart9: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&trng {
	status = "okay";
};

&spi0 {
	pinctrl-0 = <&spi0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&flash1 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		storage_partition: partition@0 {
			label = "storage";
			reg = <0X0 DT_SIZE_K(12)>;
		};
	};
};

&pwm7 {
	pinctrl-0 = <&pwm7_default>;
	interrupts = <40 1>, <41 1>;
	interrupt-names = "gtioca", "overflow";
	pinctrl-names = "default";
	status = "okay";
};

&canfd_global {
	status = "okay";
	canfd0 {
		pinctrl-0 = <&canfd0_default>;
		pinctrl-names = "default";
		rx-max-filters = <16>;
		status = "okay";
	};
};

&iic1 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <DT_FREQ_M(1)>;
	pinctrl-0 = <&iic1_default>;
	pinctrl-names = "default";
};

&eth {
	local-mac-address = [74 90 50 B0 5D E9];
	status = "okay";
	phy-handle = <&phy>;
};

&mdio {
	pinctrl-0 = <&ether_default>;
	pinctrl-names = "default";
	status = "okay";

	phy: ethernet-phy@5 {
		compatible = "ethernet-phy";
		reg = <5>;
		status = "okay";
	};
};

&usbhs {
	pinctrl-0 = <&usbhs_default>;
	pinctrl-names = "default";
	maximum-speed = "high-speed";
	status = "okay";
	zephyr_udc0: udc {
		status = "okay";
	};
};

&usbhs_phy {
	phys-clock-src = "xtal";
};

&adc0 {
	status = "okay";
	pinctrl-0 = <&adc0_default>;
	pinctrl-names = "default";
};

&port_irq12 {
	interrupts = <88 12>;
	status = "okay";
};

&port_irq13 {
	interrupts = <89 12>;
	status = "okay";
};