45ee2a0b0d
DMA transfers are supposed to write to buffer tail. Use the proper pointer to make multipart DMA transfers actually write the data to the intended location. The issue was observed on control write transfers where the OUT Data Stage was at least 128 bytes (because endpoint 0 transfer width is limited to 7 bits). The issue is unlikely to happen on non-control transfers because the transfer size width is at least 11 bits (at most 19 bits) and packet size counter is at least 4 bits (at most: 10 bits) which means that at least 2048 byte transfer spanning at least 15 packets (or at least 524288 byte spanning 1023 packets for 19 bits transfer size counter and 10 bits packet counter) is required to necessitate multipart DMA. Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> |
||
|---|---|---|
| .. | ||
| bc12 | ||
| common | ||
| device | ||
| udc | ||
| uhc | ||
| uvb | ||
| CMakeLists.txt | ||
| Kconfig | ||