df294e34e1
Fixes bad usage of single backticks in lieu of double backticks for rendering inline literals, or simple '*' for italics. When appropriate, a better construct than double backticks has been selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref: have been used if the original intention was to have a link. Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
98 lines
2.6 KiB
ReStructuredText
98 lines
2.6 KiB
ReStructuredText
.. _rzt2m_starterkit:
|
|
|
|
Renesas Starter Kit+ for RZ/T2M
|
|
###############################
|
|
|
|
Overview
|
|
********
|
|
|
|
The Renesas Starter Kit+ for RZ/T2M is an evaluation and development kit for the RZ/T2M MPU.
|
|
The board is powered through a 5V input via a DC Power Jack or USB Type-C Connector.
|
|
|
|
.. figure:: rzt2m_starterkit.png
|
|
:width: 800px
|
|
:align: center
|
|
:alt: Starter Kit+ for RZ/T2M
|
|
|
|
Starter Kit+ for RZ/T2M (Credit: Renesas)
|
|
|
|
Hardware
|
|
********
|
|
|
|
The board utilizes the SoC of part no. R9A07G075M24GBG, with 2MB of RAM.
|
|
|
|
It has several on-board memory components:
|
|
|
|
* SDRAM (256MBit),
|
|
* NOR Flash (256MBit),
|
|
* Octa Flash (512MBit),
|
|
* HyperRAM (512Mbit),
|
|
* QSPI Serial Flash (512Mbit),
|
|
* I2C EEPROM (32Kbit).
|
|
|
|
The communication interfaces include:
|
|
|
|
* Debug interfaces (J-Link, MIPI-10, MIPI-20),
|
|
* Ethernet,
|
|
* CAN,
|
|
* USB,
|
|
* RS485,
|
|
* UART,
|
|
* I2C,
|
|
* SPI.
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
+-----------+------------+-------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+=====================================+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+-------------------------------------+
|
|
| PINCTRL | on-chip | pinctrl |
|
|
+-----------+------------+-------------------------------------+
|
|
| UART | on-chip | serial |
|
|
+-----------+------------+-------------------------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+-------------------------------------+
|
|
|
|
Other hardware features are not currently supported by the port.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
By default, the board is configured for use with:
|
|
|
|
* UART0 connected to the USB serial port (pins K18, K19),
|
|
* UART3 connected to the PMOD Header (J25, pins H16, G20),
|
|
* LEDs defined as ``led0``, ``led1``, ``led2`` and ``led3``,
|
|
|
|
The Zephyr console uses UART0.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Connect to the board using the J-Link On-board USB connector.
|
|
Use ``west`` to start the debug server:
|
|
|
|
.. code-block:: console
|
|
|
|
west debugserver
|
|
|
|
Connect GDB to the server and load an application:
|
|
|
|
.. code-block::
|
|
|
|
target remote :2331
|
|
file build/zephyr/zephyr.elf
|
|
load
|
|
|
|
References
|
|
**********
|
|
|
|
.. _RZT2M Product page: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-mpus/rzt2m-high-performance-multi-function-mpu-realizing-high-speed-processing-and-high-precision-control
|